HSV VE (E Series) E2 Sep 2009 - Aug 2010 LS2 V8 1 3/4" 4 into 1 Headers
PacemakerRRP$5060.93HSV VE (E Series) E2 Sep 2009 - Aug 2010 LS2 V8 1 3/4" 4 into 1 Headers 3" Sedan Only System (SKU: PP5381-63), $5060.93 from Pacemaker. Engineered
View partPP5361-36
HSV VZ 6.0L 8 Cylinder Ute 1 3/4" Tuned Headers 2 1/2 Inch System
HSV VZ 6.0L 8 Cylinder Ute 1 3/4" Tuned Headers 2 1/2 Inch System. Fast shipping, warranty included.
BrandPacemaker
Category: Extractors and headers
RRP $4438.29 AUD
Confirmed on orderAfterpay, Zip Pay & Zip Money available
Part specs
- SKU
- PP5361-36
- Supplier
- Pacemaker
- Category
- Extractors and headers
- Vehicle fitment
- Hsv Vz
- Stock status
- Confirmed on order
The HSV VZ 6.0-litre V8 ute gets its full 2½in system in Pacemaker PP5361-36, run off 1¾in tuned-length headers. It's the 6.0-litre HSV ute fitment as a complete engine-back package — headers and pipework matched to that motor.
What does the complete system cover?
PP5361-36 replaces both the factory cast manifolds and the pipework on the HSV VZ 6.0 ute. The 1¾in tuned-length headers feed a full 2½in system, so it's an engine-back change rather than a tailpipe swap — everything from the heads back is new.
Why 1¾in primaries on the 6.0
The 1¾in tuned-length primary is the street-V8 bore. It keeps each cylinder's exhaust pulse moving fast enough to scavenge well while holding the low and mid-range torque a 6.0 ute leans on loaded or towing. The 2½in system behind it keeps that velocity through the rev range the ute actually uses.
Will it suit my HSV VZ 6.0 ute?
It's listed to fit the HSV VZ 6.0-litre V8 ute. With no specific build year published, we treat fitment as listed-to-fit and verify it against your ute — engine, transmission and what's already fitted — before ordering anything.
Is it road legal, and how is it fitted?
Headers and pipework aren't a certified emissions device, so whether the finished ute meets NSW requirements depends on the full system and its sign-off, which we work through per vehicle. Oak Flats Muffler Men fits these HSV systems in-house across the Illawarra. Listed RRP is 4,438.29 AUD; fitting is quoted once we have the ute in the bay.
Stocked and fitted by Oak Flats Muffler Men, the Illawarra exhaust and 4x4 specialist in Oak Flats, NSW.
Common questions
- What's the system size on the PP5361-36?
- A full 2½in system off 1¾in tuned-length headers, listed for the HSV VZ 6.0 V8 ute.
- Is the rear-pipe-only option available on this part?
- This listing is the full system. If you only need the rear section for the 6.0 HSV ute, tell us and we'll match the rear-pipe-only Pacemaker part number.
Fitment support across the Illawarra
Fitment checks near you across 18 Illawarra suburbs, from Oak Flats and Shellharbour to Wollongong and Kiama.Show nearby fitment areasCollapse section
Oak Flats Muffler Men can check this part against supplier specs, part number, image, RRP and vehicle details for customers around Oak Flats, Shellharbour, Wollongong, Dapto, Albion Park, Kiama and the northern suburbs.
Check fitment near Oak FlatsCheck fitment near Albion Park RailCheck fitment near ShellharbourCheck fitment near WollongongCheck fitment near DaptoCheck fitment near WarillaCheck fitment near CorrimalCheck fitment near WoononaCheck fitment near BulliCheck fitment near ThirroulCheck fitment near KiamaCheck fitment near Albion ParkCheck fitment near Lake IllawarraCheck fitment near Mount WarrigalCheck fitment near Barrack HeightsCheck fitment near Barrack PointCheck fitment near BlackbuttCheck fitment near Flinders
Related parts in this category
More extractors and headers the workshop supplies and fits. Send the vehicle and the part you are weighing up for a fitted quote.
HSV VE (E Series) E2 From Sep 2009 - Aug 2010 LS2 V8 1 7/8" 4 into 1
PacemakerRRP$5060.93HSV VE (E Series) E2 From Sep 2009 - Aug 2010 LS2 V8 1 7/8" 4 into 1 Headers 3" Sedan Only System.
View part
HSV E2 VE 8 Cylinder 6.0L / 6.2L Gen IV, LS2, LS3, Tri-Y Headers 3" Inch
PacemakerRRP$4944.11HSV E2 VE 8 Cylinder 6.0L / 6.2L Gen IV, LS2, LS3, Tri-Y Headers 3" Inch System.
View part
HSV VE (E Series) E1 From Sep 2006 - Aug 2009 LS2 V8 1 7/8" 4 into 1
PacemakerRRP$4891.13Pacemaker HSV VE (E Series) E1 From Sep 2006 - Aug 2009 LS2 V8 1 7/8" 4 into 1 Competition Headers 3" Sedan System.
View part
HSV VE (E Series) E2 From Sep 2009 - Aug 2010 LS2 V8 1 3/4" 4 into 1
PacemakerRRP$4890.77Pacemaker HSV VE (E Series) E2 From Sep 2009 - Aug 2010 LS2 V8 1 3/4" 4 into 1 Header 2 1/2" Sedan Only System.
View part
HSV VE (E Series) E2 From Sep 2009 - Aug 2010 LS2 V8 1 7/8" 4 into 1
PacemakerRRP$4890.77HSV VE (E Series) E2 From Sep 2009 - Aug 2010 LS2 V8 1 7/8" 4 into 1 Competition Headers 2 1/2" Sedan System (PP5382-03) at $4890.77 RRP.
View partBook the right exhaust job without guessing.
Send the vehicle make, model, year, engine, current issue, desired sound or performance goal, and clear photos of the existing exhaust where available.