HSV VE (E Series) E2 Sep 2009 - Aug 2010 LS2 V8 1 3/4" 4 into 1 Headers
PacemakerRRP$5060.93HSV VE (E Series) E2 Sep 2009 - Aug 2010 LS2 V8 1 3/4" 4 into 1 Headers 3" Sedan Only System (SKU: PP5381-63), $5060.93 from Pacemaker. Engineered
View partPP5361-70
HSV VZ 6.0L 8 Cylinder 1 3/4" Tuned Headers 3" Inch System
Pacemaker HSV VZ 6.0L 8 Cylinder 1 3/4" Tuned Headers 3" Inch System.
BrandPacemaker
Category: Extractors and headers
RRP $4580.81 AUD
Confirmed on orderAfterpay, Zip Pay & Zip Money available
Part specs
- SKU
- PP5361-70
- Supplier
- Pacemaker
- Category
- Extractors and headers
- Vehicle fitment
- Hsv Vz
- Stock status
- Confirmed on order
The Pacemaker PP5361-70 is the full 3in system with 1¾in tuned-length headers listed for the HSV VZ 6.0L V8. This is the HSV-specific application of the VZ 6.0 system, listed to the HSV car so the headers and pipework are matched to that build, which is the distinction that matters when you order.
Why does the HSV listing matter?
HSV-built VZ cars carry their own driveline and underbody details, and Pacemaker lists this system specifically against the HSV VZ 6.0L. Ordering to the HSV listing rather than a generic one is how the headers and 3in pipework are matched to what your car actually has; series, engine and existing exhaust all decide which set is correct.
What does the 1¾in / 3in combination suit?
1¾in tuned-length headers are the street-V8 bore: they keep gas velocity up for clean scavenging across the everyday and mid rev range, rather than chasing peak top-end like a larger primary. Behind them, the full 3in system opens the bore for flow headroom on the 6.0L, particularly on a car carrying other breathing work. It's a balanced street pairing for the HSV 6.0.
What does the package replace?
It's a header-back overhaul: the 1¾in headers replace the factory cast manifolds at the heads, then feed a complete 3in system. The cast manifolds and original pipework both come out and are replaced as one PP5361-70 set, so the bore and the headers flow as a matched system rather than a part-pipe change.
Will it suit my HSV VZ, and how is it fitted?
It's listed to fit the HSV VZ 6.0L V8. With no individual build year published, we treat fitment as listed-to-fit and confirm it on your car first. These are headers and pipework, not a certified emissions device, so NSW road compliance depends on the complete system and its sign-off. Oak Flats Muffler Men fits these Pacemaker systems in-house across the Illawarra; listed RRP is 4,580.81 AUD, with fitting quoted on the hoist.
Stocked and fitted by Oak Flats Muffler Men, the Illawarra exhaust and 4x4 specialist in Oak Flats, NSW.
Common questions
- Is the PP5361-70 the HSV listing?
- Yes, it's listed specifically to the HSV VZ 6.0L V8. Ordering to the HSV listing is how the system is matched to your car.
- What's the header and system size?
- 1¾in tuned-length headers into a full 3in system, a balanced street pairing for the 6.0L.
- Can I get just the rear section?
- This listing is the full 3in system. If you only need the back half, tell us and we'll match the rear-pipe-only Pacemaker part.
Fitment support across the Illawarra
Fitment checks near you across 18 Illawarra suburbs, from Oak Flats and Shellharbour to Wollongong and Kiama.Show nearby fitment areasCollapse section
Oak Flats Muffler Men can check this part against supplier specs, part number, image, RRP and vehicle details for customers around Oak Flats, Shellharbour, Wollongong, Dapto, Albion Park, Kiama and the northern suburbs.
Check fitment near Oak FlatsCheck fitment near Albion Park RailCheck fitment near ShellharbourCheck fitment near WollongongCheck fitment near DaptoCheck fitment near WarillaCheck fitment near CorrimalCheck fitment near WoononaCheck fitment near BulliCheck fitment near ThirroulCheck fitment near KiamaCheck fitment near Albion ParkCheck fitment near Lake IllawarraCheck fitment near Mount WarrigalCheck fitment near Barrack HeightsCheck fitment near Barrack PointCheck fitment near BlackbuttCheck fitment near Flinders
Related parts in this category
More extractors and headers the workshop supplies and fits. Send the vehicle and the part you are weighing up for a fitted quote.
HSV VE (E Series) E2 From Sep 2009 - Aug 2010 LS2 V8 1 7/8" 4 into 1
PacemakerRRP$5060.93HSV VE (E Series) E2 From Sep 2009 - Aug 2010 LS2 V8 1 7/8" 4 into 1 Headers 3" Sedan Only System.
View part
HSV E2 VE 8 Cylinder 6.0L / 6.2L Gen IV, LS2, LS3, Tri-Y Headers 3" Inch
PacemakerRRP$4944.11HSV E2 VE 8 Cylinder 6.0L / 6.2L Gen IV, LS2, LS3, Tri-Y Headers 3" Inch System.
View part
HSV VE (E Series) E1 From Sep 2006 - Aug 2009 LS2 V8 1 7/8" 4 into 1
PacemakerRRP$4891.13Pacemaker HSV VE (E Series) E1 From Sep 2006 - Aug 2009 LS2 V8 1 7/8" 4 into 1 Competition Headers 3" Sedan System.
View part
HSV VE (E Series) E2 From Sep 2009 - Aug 2010 LS2 V8 1 3/4" 4 into 1
PacemakerRRP$4890.77Pacemaker HSV VE (E Series) E2 From Sep 2009 - Aug 2010 LS2 V8 1 3/4" 4 into 1 Header 2 1/2" Sedan Only System.
View part
HSV VE (E Series) E2 From Sep 2009 - Aug 2010 LS2 V8 1 7/8" 4 into 1
PacemakerRRP$4890.77HSV VE (E Series) E2 From Sep 2009 - Aug 2010 LS2 V8 1 7/8" 4 into 1 Competition Headers 2 1/2" Sedan System (PP5382-03) at $4890.77 RRP.
View partBook the right exhaust job without guessing.
Send the vehicle make, model, year, engine, current issue, desired sound or performance goal, and clear photos of the existing exhaust where available.