HSV VE (E Series) E2 Sep 2009 - Aug 2010 LS2 V8 1 3/4" 4 into 1 Headers
PacemakerRRP$5060.93HSV VE (E Series) E2 Sep 2009 - Aug 2010 LS2 V8 1 3/4" 4 into 1 Headers 3" Sedan Only System (SKU: PP5381-63), $5060.93 from Pacemaker. Engineered
View partPP5361-77
HSV VU and VY Series 1 8 Cylinder Ute 1 3/4" Tuned Headers 3" Inch System
HSV VU and VY Series 1 8 Cylinder Ute 1 3/4" Tuned Headers 3" Inch System.
BrandPacemaker
Category: Extractors and headers
RRP $4382.56 AUD
Confirmed on orderAfterpay, Zip Pay & Zip Money available
Part specs
- SKU
- PP5361-77
- Supplier
- Pacemaker
- Category
- Extractors and headers
- Vehicle fitment
- Hsv Vu Vx Vy
- Stock status
- Confirmed on order
The Pacemaker PP5361-77 is the full 3in system with 1¾in tuned-length headers for the HSV VU and VY Series 1 V8 ute. It's the earlier-ute application in this Pacemaker line, listed to the VU / VY Series 1 era rather than the later ute builds.
Why is the VU / VY Series 1 listing specific?
The VU and VY Series 1 HSV utes have their own driveline and underbody details, distinct from the later Series 2 and VZ utes. Pacemaker lists this system against that earlier era, so the headers and 3in pipework match what those utes carry. Ordering to the right era is how the fit is confirmed; these models ran several builds and the rear routing differs across them.
What do 1¾in headers into a 3in system give?
It's a header-back package: 1¾in tuned-length headers replace the cast manifolds at the heads, then feed a full 3in system. The 1¾in primary is the street-V8 bore that scavenges cleanly without bleeding low-down response, while the 3in run gives flow headroom behind it. Manifolds and original pipework come out and are replaced as one PP5361-77 set.
Will it suit my VU or VY Series 1 ute?
It's listed to fit the HSV VU and VY Series 1 V8 ute. With no individual build year published, we treat fitment as listed-to-fit and confirm it on your ute, series, engine and existing exhaust, before anything is ordered.
Is it road legal, and how is it fitted?
These are headers and pipework, not a certified emissions device, so whether the finished ute meets NSW requirements depends on the complete system and its sign-off, handled per build. Oak Flats Muffler Men supplies and fits these Pacemaker systems in-house across the Illawarra. Listed RRP is 4,382.56 AUD; the fitting charge is quoted once the ute is on the hoist.
Stocked and fitted by Oak Flats Muffler Men, the Illawarra exhaust and 4x4 specialist in Oak Flats, NSW.
Common questions
- Which utes does the PP5361-77 cover?
- The HSV VU and VY Series 1 V8 ute, the earlier ute era in this Pacemaker line. Confirm your exact series with the workshop.
- What's the header and system size?
- 1¾in tuned-length headers into a full 3in system.
- Will it fit my HSV ute?
- It's listed to fit the HSV VU / VY Series 1 V8 ute. Fitment data can be imperfect, so confirm your build with the workshop before ordering.
Fitment support across the Illawarra
Fitment checks near you across 18 Illawarra suburbs, from Oak Flats and Shellharbour to Wollongong and Kiama.Show nearby fitment areasCollapse section
Oak Flats Muffler Men can check this part against supplier specs, part number, image, RRP and vehicle details for customers around Oak Flats, Shellharbour, Wollongong, Dapto, Albion Park, Kiama and the northern suburbs.
Check fitment near Oak FlatsCheck fitment near Albion Park RailCheck fitment near ShellharbourCheck fitment near WollongongCheck fitment near DaptoCheck fitment near WarillaCheck fitment near CorrimalCheck fitment near WoononaCheck fitment near BulliCheck fitment near ThirroulCheck fitment near KiamaCheck fitment near Albion ParkCheck fitment near Lake IllawarraCheck fitment near Mount WarrigalCheck fitment near Barrack HeightsCheck fitment near Barrack PointCheck fitment near BlackbuttCheck fitment near Flinders
Related parts in this category
More extractors and headers the workshop supplies and fits. Send the vehicle and the part you are weighing up for a fitted quote.
HSV VE (E Series) E2 From Sep 2009 - Aug 2010 LS2 V8 1 7/8" 4 into 1
PacemakerRRP$5060.93HSV VE (E Series) E2 From Sep 2009 - Aug 2010 LS2 V8 1 7/8" 4 into 1 Headers 3" Sedan Only System.
View part
HSV E2 VE 8 Cylinder 6.0L / 6.2L Gen IV, LS2, LS3, Tri-Y Headers 3" Inch
PacemakerRRP$4944.11HSV E2 VE 8 Cylinder 6.0L / 6.2L Gen IV, LS2, LS3, Tri-Y Headers 3" Inch System.
View part
HSV VE (E Series) E1 From Sep 2006 - Aug 2009 LS2 V8 1 7/8" 4 into 1
PacemakerRRP$4891.13Pacemaker HSV VE (E Series) E1 From Sep 2006 - Aug 2009 LS2 V8 1 7/8" 4 into 1 Competition Headers 3" Sedan System.
View part
HSV VE (E Series) E2 From Sep 2009 - Aug 2010 LS2 V8 1 3/4" 4 into 1
PacemakerRRP$4890.77Pacemaker HSV VE (E Series) E2 From Sep 2009 - Aug 2010 LS2 V8 1 3/4" 4 into 1 Header 2 1/2" Sedan Only System.
View part
HSV VE (E Series) E2 From Sep 2009 - Aug 2010 LS2 V8 1 7/8" 4 into 1
PacemakerRRP$4890.77HSV VE (E Series) E2 From Sep 2009 - Aug 2010 LS2 V8 1 7/8" 4 into 1 Competition Headers 2 1/2" Sedan System (PP5382-03) at $4890.77 RRP.
View partBook the right exhaust job without guessing.
Send the vehicle make, model, year, engine, current issue, desired sound or performance goal, and clear photos of the existing exhaust where available.