HSV VE (E Series) E2 Sep 2009 - Aug 2010 LS2 V8 1 3/4" 4 into 1 Headers
PacemakerRRP$5060.93HSV VE (E Series) E2 Sep 2009 - Aug 2010 LS2 V8 1 3/4" 4 into 1 Headers 3" Sedan Only System (SKU: PP5381-63), $5060.93 from Pacemaker. Engineered
View partPP5361-80
HSV VZ 6.0L 8 Cylinder Ute 1 3/4" Tuned Headers 3" Inch System With Rear Pipe Only
HSV VZ 6.0L 8 Cylinder Ute 1 3/4" Tuned Headers 3" Inch System With Rear Pipe Only.
BrandPacemaker
Category: Extractors and headers
RRP $4257.79 AUD
Confirmed on orderAfterpay, Zip Pay & Zip Money available
Part specs
- SKU
- PP5361-80
- Supplier
- Pacemaker
- Category
- Extractors and headers
- Vehicle fitment
- Hsv Vz
- Stock status
- Confirmed on order
Cut for the HSV VZ 6.0-litre V8 ute, the Pacemaker PP5361-80 is the rear-pipe-only build — 1¾in tuned headers and a 3-inch system supplied without the rear muffler. It's the 6.0L-specific set for owners completing their own back-end.
What sets this 6.0-litre, rear-pipe-only set apart?
The PP5361-80 is listed specifically to the HSV VZ 6.0-litre ute — the bigger-capacity V8 with its own head and port layout — and is configured rear-pipe-only, so the rear muffler is left off. That combination suits a 6.0 HSV ute owner who's running a separate muffler or existing rear section rather than a full enclosed system.
Why 1¾in primaries on the 6.0?
1¾in primary tubing holds gas velocity up through the low and mid-range, where a 6.0 HSV ute spends most of its time hauling and driving on the street. The tuned runners replace the cast factory manifolds and merge into a collector ahead of the 3-inch pipework. No power or sound figures are published, and we won't quote any.
Will it suit my VZ 6.0 HSV ute?
It's listed to fit the HSV VZ 6.0-litre V8 ute. Being rear-pipe-only, the termination depends on your chosen rear section, so confirm your full plan and engine details with us and we'll check it against the listing before ordering.
What does fitting involve at our Illawarra workshop?
Oak Flats Muffler Men fits these Pacemaker header packages in the Illawarra and can supply a rear muffler to finish the system. We seal the head flanges, check ute clearance, and run the 3-inch system through to your back-end. RRP is listed at 4257.79 AUD; fitting is quoted after inspection.
Stocked and fitted by Oak Flats Muffler Men, the Illawarra exhaust and 4x4 specialist in Oak Flats, NSW.
Common questions
- Is this the 6.0-specific set?
- Yes — the PP5361-80 is listed to the HSV VZ 6.0-litre ute, which has its own head and port layout. Tell us your engine and we'll confirm it.
- What does rear-pipe-only mean for this kit?
- It's supplied without the rear muffler, for builders finishing their own back-end. We can supply and fit a muffler to complete the run.
Fitment support across the Illawarra
Fitment checks near you across 18 Illawarra suburbs, from Oak Flats and Shellharbour to Wollongong and Kiama.Show nearby fitment areasCollapse section
Oak Flats Muffler Men can check this part against supplier specs, part number, image, RRP and vehicle details for customers around Oak Flats, Shellharbour, Wollongong, Dapto, Albion Park, Kiama and the northern suburbs.
Check fitment near Oak FlatsCheck fitment near Albion Park RailCheck fitment near ShellharbourCheck fitment near WollongongCheck fitment near DaptoCheck fitment near WarillaCheck fitment near CorrimalCheck fitment near WoononaCheck fitment near BulliCheck fitment near ThirroulCheck fitment near KiamaCheck fitment near Albion ParkCheck fitment near Lake IllawarraCheck fitment near Mount WarrigalCheck fitment near Barrack HeightsCheck fitment near Barrack PointCheck fitment near BlackbuttCheck fitment near Flinders
Related parts in this category
More extractors and headers the workshop supplies and fits. Send the vehicle and the part you are weighing up for a fitted quote.
HSV VE (E Series) E2 From Sep 2009 - Aug 2010 LS2 V8 1 7/8" 4 into 1
PacemakerRRP$5060.93HSV VE (E Series) E2 From Sep 2009 - Aug 2010 LS2 V8 1 7/8" 4 into 1 Headers 3" Sedan Only System.
View part
HSV E2 VE 8 Cylinder 6.0L / 6.2L Gen IV, LS2, LS3, Tri-Y Headers 3" Inch
PacemakerRRP$4944.11HSV E2 VE 8 Cylinder 6.0L / 6.2L Gen IV, LS2, LS3, Tri-Y Headers 3" Inch System.
View part
HSV VE (E Series) E1 From Sep 2006 - Aug 2009 LS2 V8 1 7/8" 4 into 1
PacemakerRRP$4891.13Pacemaker HSV VE (E Series) E1 From Sep 2006 - Aug 2009 LS2 V8 1 7/8" 4 into 1 Competition Headers 3" Sedan System.
View part
HSV VE (E Series) E2 From Sep 2009 - Aug 2010 LS2 V8 1 3/4" 4 into 1
PacemakerRRP$4890.77Pacemaker HSV VE (E Series) E2 From Sep 2009 - Aug 2010 LS2 V8 1 3/4" 4 into 1 Header 2 1/2" Sedan Only System.
View part
HSV VE (E Series) E2 From Sep 2009 - Aug 2010 LS2 V8 1 7/8" 4 into 1
PacemakerRRP$4890.77HSV VE (E Series) E2 From Sep 2009 - Aug 2010 LS2 V8 1 7/8" 4 into 1 Competition Headers 2 1/2" Sedan System (PP5382-03) at $4890.77 RRP.
View partBook the right exhaust job without guessing.
Send the vehicle make, model, year, engine, current issue, desired sound or performance goal, and clear photos of the existing exhaust where available.