HSV VE (E Series) E2 Sep 2009 - Aug 2010 LS2 V8 1 3/4" 4 into 1 Headers
PacemakerRRP$5060.93HSV VE (E Series) E2 Sep 2009 - Aug 2010 LS2 V8 1 3/4" 4 into 1 Headers 3" Sedan Only System (SKU: PP5381-63), $5060.93 from Pacemaker. Engineered
View partPP5363-14
HSV VZ 6.0L 8 Cylinder 1 7/8 Tuned Headers 2 1/2 Inch System With Rear Pipe Only
Pacemaker HSV VZ 6.0L 8 Cylinder 1 7/8 Tuned Headers 2 1/2 Inch System With Rear Pipe Only.
BrandPacemaker
Category: Extractors and headers
RRP $4115.01 AUD
Confirmed on orderAfterpay, Zip Pay & Zip Money available
Part specs
- SKU
- PP5363-14
- Supplier
- Pacemaker
- Category
- Extractors and headers
- Vehicle fitment
- Hsv Vz
- Stock status
- Confirmed on order
The Pacemaker PP5363-14 steps up to 1⅞in tuned-length headers for the HSV VZ 6.0L V8, supplied as the rear-pipe-only configuration. The larger 1⅞in primary is the lead here, the higher-output header bore, paired with a back-section-only supply.
What does the 1⅞in primary suit?
At 1⅞in the primary tubes are larger than the smaller bores commonly run on a stock-pace street V8, which trades a little low-rpm gas velocity for more flow capacity higher up. That suits a 6.0L V8 built to rev harder or carrying other breathing work, where the bigger primary stops the headers becoming the restriction. It's the larger-bore path for an engine pushed past a standard street tune.
Why the rear-pipe-only supply?
This listing is the rear pipework rather than a full engine-back kit. It suits a VZ 6.0 that already has its 1⅞in headers and front section in place and needs the back half matched. Because it's the rear section, we confirm what's already fitted so the new pipe joins cleanly to your existing front-end rather than assuming a complete swap.
Will it suit my HSV VZ 6.0?
It's listed to fit the HSV VZ 6.0L V8. With no individual build year published, we treat fitment as listed-to-fit and verify it on your car, including how the rear section joins your existing front pipework, before ordering, since these models ran several builds.
Is it road legal, and how is it fitted?
Headers and pipework aren't a certified emissions device, so road compliance depends on the complete system and NSW sign-off, handled per build. Oak Flats Muffler Men fits these Pacemaker systems in-house across the Illawarra. Listed RRP is 4,115.01 AUD; the fitting charge is quoted with the car on the hoist.
Stocked and fitted by Oak Flats Muffler Men, the Illawarra exhaust and 4x4 specialist in Oak Flats, NSW.
Common questions
- What primary size are the PP5363-14 headers?
- 1⅞in tuned-length primaries, the larger header bore suited to a 6.0 built to rev harder, over the smaller bores run on a stock-pace street V8.
- Is this a full system?
- No, it's the rear-pipe-only configuration. It assumes your 1⅞in headers and front section are already in place; we confirm the join.
- Will it fit my HSV VZ 6.0L?
- It's listed to fit the HSV VZ 6.0L V8. Confirm your exact build and existing front pipework with the workshop before ordering.
Fitment support across the Illawarra
Fitment checks near you across 18 Illawarra suburbs, from Oak Flats and Shellharbour to Wollongong and Kiama.Show nearby fitment areasCollapse section
Oak Flats Muffler Men can check this part against supplier specs, part number, image, RRP and vehicle details for customers around Oak Flats, Shellharbour, Wollongong, Dapto, Albion Park, Kiama and the northern suburbs.
Check fitment near Oak FlatsCheck fitment near Albion Park RailCheck fitment near ShellharbourCheck fitment near WollongongCheck fitment near DaptoCheck fitment near WarillaCheck fitment near CorrimalCheck fitment near WoononaCheck fitment near BulliCheck fitment near ThirroulCheck fitment near KiamaCheck fitment near Albion ParkCheck fitment near Lake IllawarraCheck fitment near Mount WarrigalCheck fitment near Barrack HeightsCheck fitment near Barrack PointCheck fitment near BlackbuttCheck fitment near Flinders
Related parts in this category
More extractors and headers the workshop supplies and fits. Send the vehicle and the part you are weighing up for a fitted quote.
HSV VE (E Series) E2 From Sep 2009 - Aug 2010 LS2 V8 1 7/8" 4 into 1
PacemakerRRP$5060.93HSV VE (E Series) E2 From Sep 2009 - Aug 2010 LS2 V8 1 7/8" 4 into 1 Headers 3" Sedan Only System.
View part
HSV E2 VE 8 Cylinder 6.0L / 6.2L Gen IV, LS2, LS3, Tri-Y Headers 3" Inch
PacemakerRRP$4944.11HSV E2 VE 8 Cylinder 6.0L / 6.2L Gen IV, LS2, LS3, Tri-Y Headers 3" Inch System.
View part
HSV VE (E Series) E1 From Sep 2006 - Aug 2009 LS2 V8 1 7/8" 4 into 1
PacemakerRRP$4891.13Pacemaker HSV VE (E Series) E1 From Sep 2006 - Aug 2009 LS2 V8 1 7/8" 4 into 1 Competition Headers 3" Sedan System.
View part
HSV VE (E Series) E2 From Sep 2009 - Aug 2010 LS2 V8 1 3/4" 4 into 1
PacemakerRRP$4890.77Pacemaker HSV VE (E Series) E2 From Sep 2009 - Aug 2010 LS2 V8 1 3/4" 4 into 1 Header 2 1/2" Sedan Only System.
View part
HSV VE (E Series) E2 From Sep 2009 - Aug 2010 LS2 V8 1 7/8" 4 into 1
PacemakerRRP$4890.77HSV VE (E Series) E2 From Sep 2009 - Aug 2010 LS2 V8 1 7/8" 4 into 1 Competition Headers 2 1/2" Sedan System (PP5382-03) at $4890.77 RRP.
View partBook the right exhaust job without guessing.
Send the vehicle make, model, year, engine, current issue, desired sound or performance goal, and clear photos of the existing exhaust where available.