HSV VE (E Series) E2 Sep 2009 - Aug 2010 LS2 V8 1 3/4" 4 into 1 Headers
PacemakerRRP$5060.93HSV VE (E Series) E2 Sep 2009 - Aug 2010 LS2 V8 1 3/4" 4 into 1 Headers 3" Sedan Only System (SKU: PP5381-63), $5060.93 from Pacemaker. Engineered
View partPP5363-28
HSV VZ 6.0L 8 Cylinder Ute 1 7/8 Tuned Headers 2 1/2 Inch System With Rear Pipe Only
HSV VZ 6.0L 8 Cylinder Ute 1 7/8 Tuned Headers 2 1/2 Inch System With Rear Pipe Only (SKU: PP5363-28), $4115.01 from Pacemaker.
BrandPacemaker
Category: Extractors and headers
RRP $4115.01 AUD
Confirmed on orderAfterpay, Zip Pay & Zip Money available
Part specs
- SKU
- PP5363-28
- Supplier
- Pacemaker
- Category
- Extractors and headers
- Vehicle fitment
- Hsv Vz
- Stock status
- Confirmed on order
The Pacemaker PP5363-28 is a set of 1-7/8in tuned headers with a 2-1/2in system, listed to fit the HSV VZ 6.0L eight-cylinder ute. This is the rear-pipe-only version, supplied without a muffler.
What are tuned headers and what do they change?
Headers, also called extractors, replace the cast factory exhaust manifolds with separate tubular runners off each cylinder. "Tuned" refers to the primary tube lengths being matched so the cylinders scavenge in step. The PP5363-28 uses 1-7/8in primaries feeding a 2-1/2in system on a 6.0L eight-cylinder engine. It changes the exhaust side of the engine, working as part of the wider exhaust rather than an internal part.
What does the rear-pipe-only build mean?
This version of the PP5363-28 is the with-rear-pipe-only configuration, supplied without a muffler. That means the headers and the 2-1/2in pipework are there, but the silencing is left for you to specify, so the note will be louder than a mufflered build unless one is added behind it. Those two figures, 1-7/8in primaries and a 2-1/2in system, are the dimensions to work from.
Will it suit my HSV VZ ute?
The PP5363-28 is listed to fit the HSV VZ 6.0L eight-cylinder ute. Because the listing names the VZ and the 6.0L engine specifically, confirm your exact model and engine with the workshop before ordering, since header fitment is sensitive to the precise variant.
What does fitting involve at our Illawarra workshop?
Oak Flats Muffler Men fits tuned headers like the PP5363-28 in-house across the Illawarra. The job needs good access to drop the factory manifolds, fresh gaskets, and the 2-1/2in rear pipe lined up cleanly behind the extractors. Supplied by Pacemaker at $4,115.01 AUD; send us your HSV VZ ute's details and we'll confirm the fit and book the bay.
Stocked and fitted by Oak Flats Muffler Men, the Illawarra exhaust and 4x4 specialist in Oak Flats, NSW.
Common questions
- What does the PP5363-28 fit?
- It is listed to fit the HSV VZ 6.0L eight-cylinder ute. Confirm your exact model and engine with the workshop before ordering.
- Does this version include a muffler?
- No — this is the rear-pipe-only build, supplied without a muffler. The 1-7/8in headers and 2-1/2in system are included; talk to the workshop about silencing.
Fitment support across the Illawarra
Fitment checks near you across 18 Illawarra suburbs, from Oak Flats and Shellharbour to Wollongong and Kiama.Show nearby fitment areasCollapse section
Oak Flats Muffler Men can check this part against supplier specs, part number, image, RRP and vehicle details for customers around Oak Flats, Shellharbour, Wollongong, Dapto, Albion Park, Kiama and the northern suburbs.
Check fitment near Oak FlatsCheck fitment near Albion Park RailCheck fitment near ShellharbourCheck fitment near WollongongCheck fitment near DaptoCheck fitment near WarillaCheck fitment near CorrimalCheck fitment near WoononaCheck fitment near BulliCheck fitment near ThirroulCheck fitment near KiamaCheck fitment near Albion ParkCheck fitment near Lake IllawarraCheck fitment near Mount WarrigalCheck fitment near Barrack HeightsCheck fitment near Barrack PointCheck fitment near BlackbuttCheck fitment near Flinders
Related parts in this category
More extractors and headers the workshop supplies and fits. Send the vehicle and the part you are weighing up for a fitted quote.
HSV VE (E Series) E2 From Sep 2009 - Aug 2010 LS2 V8 1 7/8" 4 into 1
PacemakerRRP$5060.93HSV VE (E Series) E2 From Sep 2009 - Aug 2010 LS2 V8 1 7/8" 4 into 1 Headers 3" Sedan Only System.
View part
HSV E2 VE 8 Cylinder 6.0L / 6.2L Gen IV, LS2, LS3, Tri-Y Headers 3" Inch
PacemakerRRP$4944.11HSV E2 VE 8 Cylinder 6.0L / 6.2L Gen IV, LS2, LS3, Tri-Y Headers 3" Inch System.
View part
HSV VE (E Series) E1 From Sep 2006 - Aug 2009 LS2 V8 1 7/8" 4 into 1
PacemakerRRP$4891.13Pacemaker HSV VE (E Series) E1 From Sep 2006 - Aug 2009 LS2 V8 1 7/8" 4 into 1 Competition Headers 3" Sedan System.
View part
HSV VE (E Series) E2 From Sep 2009 - Aug 2010 LS2 V8 1 3/4" 4 into 1
PacemakerRRP$4890.77Pacemaker HSV VE (E Series) E2 From Sep 2009 - Aug 2010 LS2 V8 1 3/4" 4 into 1 Header 2 1/2" Sedan Only System.
View part
HSV VE (E Series) E2 From Sep 2009 - Aug 2010 LS2 V8 1 7/8" 4 into 1
PacemakerRRP$4890.77HSV VE (E Series) E2 From Sep 2009 - Aug 2010 LS2 V8 1 7/8" 4 into 1 Competition Headers 2 1/2" Sedan System (PP5382-03) at $4890.77 RRP.
View partBook the right exhaust job without guessing.
Send the vehicle make, model, year, engine, current issue, desired sound or performance goal, and clear photos of the existing exhaust where available.