PP5363-64

HSV VZ 6.0L 8 Cylinder 1 7/8 Tuned Headers 3" Inch System With Rear Pipe Only

HSV VZ 6.0L 8 Cylinder 1 7/8 Tuned Headers 3" Inch System With Rear Pipe Only.

BrandPacemaker

Category: Extractors and headers

RRP $4257.79 AUD
Confirmed on order
Afterpay, Zip Pay & Zip Money available
Afterpay acceptedZip accepted — Zip Pay and Zip Money
HSV VZ 6.0L 8 Cylinder 1 7/8 Tuned Headers 3" Inch System With Rear Pipe Only product image

Part specs

SKU
PP5363-64
Supplier
Pacemaker
Category
Extractors and headers
Vehicle fitment
Hsv Vz
Stock status
Confirmed on order

Listed for the HSV VZ with the 6.0L eight-cylinder, the Pacemaker PP5363-64 is a 1-7/8in tuned header set running into a 3in system. It's the rear-pipe-only version, supplied without the muffler.

What makes this an HSV-specific set?

The PP5363-64 is listed against the HSV VZ 6.0L, the hotter eight-cylinder build, and the header is sized to match it: 1-7/8in primaries into a 3in system. The larger 1-7/8in bore suits a higher-output engine that's worked into the upper rev range, where the extra tube area helps the gas keep moving rather than packing the speed down low.

What do tuned headers replace?

Tuned headers swap the factory cast manifolds for tubular runners off each cylinder, with matched primary lengths so the cylinders scavenge in turn. On the PP5363-64 those primaries step up into 3in pipework, so the header and the system behind it are sized together rather than the header feeding a tighter pipe.

Will it fit my HSV VZ?

It's listed to fit the HSV VZ with the 6.0L eight-cylinder. Header fitment is tight to the exact variant, so confirm your HSV VZ build and engine with the workshop before ordering this rear-pipe-only set.

What's involved in fitting?

Oak Flats Muffler Men fits Pacemaker headers in-house across the Illawarra. We drop the factory manifolds, fit fresh gaskets and the 3in rear pipework, and talk through the muffler since this build is supplied without one. Recommended retail is $4,257.79 AUD; send your HSV VZ details and we'll confirm the fitment.

Stocked and fitted by Oak Flats Muffler Men, the Illawarra exhaust and 4x4 specialist in Oak Flats, NSW.

Common questions

Which vehicle is the PP5363-64 listed for?
The HSV VZ with the 6.0L eight-cylinder. Confirm your exact build with the workshop before ordering.
Is a muffler included?
No, this is the rear-pipe-only build with no muffler section. It runs 1-7/8in primaries into a 3in system.

Fitment support across the Illawarra

Fitment checks near you across 18 Illawarra suburbs, from Oak Flats and Shellharbour to Wollongong and Kiama.
Show nearby fitment areasCollapse section

Book the right exhaust job without guessing.

Send the vehicle make, model, year, engine, current issue, desired sound or performance goal, and clear photos of the existing exhaust where available.