HSV VE (E Series) E2 Sep 2009 - Aug 2010 LS2 V8 1 3/4" 4 into 1 Headers
PacemakerRRP$5060.93HSV VE (E Series) E2 Sep 2009 - Aug 2010 LS2 V8 1 3/4" 4 into 1 Headers 3" Sedan Only System (SKU: PP5381-63), $5060.93 from Pacemaker. Engineered
View partPP5367-16
HSV VZ 6.0L 8 Cylinder Try-Y Headers 2 1/2 Inch System
Pacemaker HSV VZ 6.0L 8 Cylinder Try-Y Headers 2 1/2 Inch System.
BrandPacemaker
Category: Extractors and headers
RRP $4321.46 AUD
Confirmed on orderAfterpay, Zip Pay & Zip Money available
Part specs
- SKU
- PP5367-16
- Supplier
- Pacemaker
- Category
- Extractors and headers
- Vehicle fitment
- Hsv Vz
- Stock status
- Confirmed on order
The Pacemaker PP5367-16 is a Tri-Y header set with a 2-1/2 inch system, listed to fit the HSV VZ with the 6.0L V8. It's the headers plus the pipework, not just the front extractors.
What does this system cover?
This pairs Tri-Y extractors with a 2-1/2 inch system, listed for the HSV VZ 6.0L V8. Tri-Y refers to the way the primary pipes pair off before merging into the collector — a layout aimed at keeping a V8's mid-range tidy. Unlike the rear-pipe-only variant in the same family, this is the fuller 2-1/2 inch system. No power or sound figures are published by the supplier, and we won't quote any.
What are headers and what do they change?
Headers (extractors) swap the cast factory manifolds for tuned tubular primaries, giving each cylinder a cleaner path out. They're the front of a performance exhaust, which is why they're fitted with the pipework that runs behind them. On an HSV VZ the gains come from the whole system and the tune working together — we don't publish numbers for the part in isolation, and the on-road note depends on the full build.
Will it suit my HSV VZ?
It's listed to fit the HSV VZ with the 6.0L V8. Header fitment is tight, so confirm your exact variant and any earlier exhaust work with the workshop before ordering — VZ builds differ.
What does fitting involve at our Illawarra workshop?
Oak Flats Muffler Men fits HSV header systems like this in the Illawarra. We check extractor clearance, fit fresh gaskets, line up the 2-1/2 inch system and seal the joins for heat. RRP is listed at 4321 AUD; fitting is quoted once we've seen the car.
Stocked and fitted by Oak Flats Muffler Men, the Illawarra exhaust and 4x4 specialist in Oak Flats, NSW.
Common questions
- How does the PP5367-16 differ from the rear-pipe-only version?
- This is the fuller 2-1/2 inch Tri-Y system for the HSV VZ 6.0L, where the -14 in the same family is supplied as rear pipe only. Confirm which suits your setup with the workshop.
- Will it fit my VZ 6.0L?
- It's listed to fit the HSV VZ 6.0L V8. Confirm your exact variant with the workshop before ordering.
Fitment support across the Illawarra
Fitment checks near you across 18 Illawarra suburbs, from Oak Flats and Shellharbour to Wollongong and Kiama.Show nearby fitment areasCollapse section
Oak Flats Muffler Men can check this part against supplier specs, part number, image, RRP and vehicle details for customers around Oak Flats, Shellharbour, Wollongong, Dapto, Albion Park, Kiama and the northern suburbs.
Check fitment near Oak FlatsCheck fitment near Albion Park RailCheck fitment near ShellharbourCheck fitment near WollongongCheck fitment near DaptoCheck fitment near WarillaCheck fitment near CorrimalCheck fitment near WoononaCheck fitment near BulliCheck fitment near ThirroulCheck fitment near KiamaCheck fitment near Albion ParkCheck fitment near Lake IllawarraCheck fitment near Mount WarrigalCheck fitment near Barrack HeightsCheck fitment near Barrack PointCheck fitment near BlackbuttCheck fitment near Flinders
Related parts in this category
More extractors and headers the workshop supplies and fits. Send the vehicle and the part you are weighing up for a fitted quote.
HSV VE (E Series) E2 From Sep 2009 - Aug 2010 LS2 V8 1 7/8" 4 into 1
PacemakerRRP$5060.93HSV VE (E Series) E2 From Sep 2009 - Aug 2010 LS2 V8 1 7/8" 4 into 1 Headers 3" Sedan Only System.
View part
HSV E2 VE 8 Cylinder 6.0L / 6.2L Gen IV, LS2, LS3, Tri-Y Headers 3" Inch
PacemakerRRP$4944.11HSV E2 VE 8 Cylinder 6.0L / 6.2L Gen IV, LS2, LS3, Tri-Y Headers 3" Inch System.
View part
HSV VE (E Series) E1 From Sep 2006 - Aug 2009 LS2 V8 1 7/8" 4 into 1
PacemakerRRP$4891.13Pacemaker HSV VE (E Series) E1 From Sep 2006 - Aug 2009 LS2 V8 1 7/8" 4 into 1 Competition Headers 3" Sedan System.
View part
HSV VE (E Series) E2 From Sep 2009 - Aug 2010 LS2 V8 1 3/4" 4 into 1
PacemakerRRP$4890.77Pacemaker HSV VE (E Series) E2 From Sep 2009 - Aug 2010 LS2 V8 1 3/4" 4 into 1 Header 2 1/2" Sedan Only System.
View part
HSV VE (E Series) E2 From Sep 2009 - Aug 2010 LS2 V8 1 7/8" 4 into 1
PacemakerRRP$4890.77HSV VE (E Series) E2 From Sep 2009 - Aug 2010 LS2 V8 1 7/8" 4 into 1 Competition Headers 2 1/2" Sedan System (PP5382-03) at $4890.77 RRP.
View partBook the right exhaust job without guessing.
Send the vehicle make, model, year, engine, current issue, desired sound or performance goal, and clear photos of the existing exhaust where available.