HSV VE (E Series) E2 Sep 2009 - Aug 2010 LS2 V8 1 3/4" 4 into 1 Headers
PacemakerRRP$5060.93HSV VE (E Series) E2 Sep 2009 - Aug 2010 LS2 V8 1 3/4" 4 into 1 Headers 3" Sedan Only System (SKU: PP5381-63), $5060.93 from Pacemaker. Engineered
View partPP5367-66
HSV VZ 6.0L 8 Cylinder Try-Y Headers 3" Inch System
HSV VZ 6.0L 8 Cylinder Try-Y Headers 3" Inch System.
BrandPacemaker
Category: Extractors and headers
RRP $4464.00 AUD
Confirmed on orderAfterpay, Zip Pay & Zip Money available
Part specs
- SKU
- PP5367-66
- Supplier
- Pacemaker
- Category
- Extractors and headers
- Vehicle fitment
- Hsv Vz
- Stock status
- Confirmed on order
Built around a 3in system, the Pacemaker PP5367-66 is a Tri-Y header package listed to fit the HSV VZ with the 6.0L V8. The 3in sizing is the headline: it opens the path off the heads while the Tri-Y merge keeps the bottom-end torque honest.
Why a 3in Tri-Y on the VZ 6.0L?
Pairing a 3in run with a Tri-Y header is a deliberate combination on the 6.0L V8. The larger 3in path gives the engine room to breathe higher up, while the staged Tri-Y geometry — four primaries merging into two, then into one — protects gas speed so the VZ doesn't go soft off idle. It is the broad-band alternative to a straight four-into-one for owners chasing a usable spread rather than a peaky top end.
What does the PP5367-66 replace?
These headers bolt to the cylinder heads in place of the restrictive cast factory manifolds and form the first section of the exhaust. Everything behind them inherits the flow they set up, which is why a set like this is usually matched to the rest of the system rather than fitted alone. Material and any further specs beyond the 3in sizing are not published by the supplier, so we don't quote them.
Will it suit my HSV VZ?
It is listed to fit the HSV VZ with the 6.0L V8. Treat that as listed to fit rather than guaranteed — feed data can be imperfect on these cars — so confirm your exact build with the workshop before ordering. The listed RRP is $4464, and at that price it is a special-order set we confirm before placing.
What does fitting involve at our Illawarra workshop?
Oak Flats Muffler Men supplies and fits these Pacemaker headers in-house across the Illawarra. Header work on the 6.0L means manifold removal, fresh gaskets and clearance checks where the 3in collectors meet the rest of the line, so we verify the fitment to your HSV and book the hoist.
Stocked and fitted by Oak Flats Muffler Men, the Illawarra exhaust and 4x4 specialist in Oak Flats, NSW.
Common questions
- What system size are the PP5367-66 headers built to?
- They are built around a 3in system with a Tri-Y merge, listed for the HSV VZ with the 6.0L V8.
- Why Tri-Y rather than four-into-one?
- The Tri-Y layout merges the primaries in two stages to favour a broader low and mid-range spread, where a four-into-one tends to bias the top end.
- Does it suit my HSV VZ 6.0L?
- It is listed to fit the HSV VZ with the 6.0L V8. Confirm your exact build with Oak Flats Muffler Men before ordering.
Fitment support across the Illawarra
Fitment checks near you across 18 Illawarra suburbs, from Oak Flats and Shellharbour to Wollongong and Kiama.Show nearby fitment areasCollapse section
Oak Flats Muffler Men can check this part against supplier specs, part number, image, RRP and vehicle details for customers around Oak Flats, Shellharbour, Wollongong, Dapto, Albion Park, Kiama and the northern suburbs.
Check fitment near Oak FlatsCheck fitment near Albion Park RailCheck fitment near ShellharbourCheck fitment near WollongongCheck fitment near DaptoCheck fitment near WarillaCheck fitment near CorrimalCheck fitment near WoononaCheck fitment near BulliCheck fitment near ThirroulCheck fitment near KiamaCheck fitment near Albion ParkCheck fitment near Lake IllawarraCheck fitment near Mount WarrigalCheck fitment near Barrack HeightsCheck fitment near Barrack PointCheck fitment near BlackbuttCheck fitment near Flinders
Related parts in this category
More extractors and headers the workshop supplies and fits. Send the vehicle and the part you are weighing up for a fitted quote.
HSV VE (E Series) E2 From Sep 2009 - Aug 2010 LS2 V8 1 7/8" 4 into 1
PacemakerRRP$5060.93HSV VE (E Series) E2 From Sep 2009 - Aug 2010 LS2 V8 1 7/8" 4 into 1 Headers 3" Sedan Only System.
View part
HSV E2 VE 8 Cylinder 6.0L / 6.2L Gen IV, LS2, LS3, Tri-Y Headers 3" Inch
PacemakerRRP$4944.11HSV E2 VE 8 Cylinder 6.0L / 6.2L Gen IV, LS2, LS3, Tri-Y Headers 3" Inch System.
View part
HSV VE (E Series) E1 From Sep 2006 - Aug 2009 LS2 V8 1 7/8" 4 into 1
PacemakerRRP$4891.13Pacemaker HSV VE (E Series) E1 From Sep 2006 - Aug 2009 LS2 V8 1 7/8" 4 into 1 Competition Headers 3" Sedan System.
View part
HSV VE (E Series) E2 From Sep 2009 - Aug 2010 LS2 V8 1 3/4" 4 into 1
PacemakerRRP$4890.77Pacemaker HSV VE (E Series) E2 From Sep 2009 - Aug 2010 LS2 V8 1 3/4" 4 into 1 Header 2 1/2" Sedan Only System.
View part
HSV VE (E Series) E2 From Sep 2009 - Aug 2010 LS2 V8 1 7/8" 4 into 1
PacemakerRRP$4890.77HSV VE (E Series) E2 From Sep 2009 - Aug 2010 LS2 V8 1 7/8" 4 into 1 Competition Headers 2 1/2" Sedan System (PP5382-03) at $4890.77 RRP.
View partBook the right exhaust job without guessing.
Send the vehicle make, model, year, engine, current issue, desired sound or performance goal, and clear photos of the existing exhaust where available.