HSV VE (E Series) E2 Sep 2009 - Aug 2010 LS2 V8 1 3/4" 4 into 1 Headers
PacemakerRRP$5060.93HSV VE (E Series) E2 Sep 2009 - Aug 2010 LS2 V8 1 3/4" 4 into 1 Headers 3" Sedan Only System (SKU: PP5381-63), $5060.93 from Pacemaker. Engineered
View partPP5367-73
HSV VU and VY Series 1 8 Cylinder Ute Try-Y Headers 3" Inch System
HSV VU and VY Series 1 8 Cylinder Ute Try-Y Headers 3" Inch System. Fast.
BrandPacemaker
Category: Extractors and headers
RRP $4265.74 AUD
Confirmed on orderAfterpay, Zip Pay & Zip Money available
Part specs
- SKU
- PP5367-73
- Supplier
- Pacemaker
- Category
- Extractors and headers
- Vehicle fitment
- Hsv Vu Vx Vy
- Stock status
- Confirmed on order
The Pacemaker PP5367-73 is the ute-bodied member of this Tri-Y header family, listed to fit the HSV VU and VY Series 1 ute. It is shaped for the ute's longer rear floor and routed to a 3in system off the V8.
What makes this the ute version?
Where a sedan header set routes into a boot-floor layout, the PP5367-73 is listed specifically for the HSV VU and VY Series 1 ute, so its collectors and downstream routing are set up for the ute body and its tray-end exit. The Series 1 qualifier matters: HSV revised the platform across the VY run, so this set is tied to the early build rather than the whole series.
What does a Tri-Y header do here?
A Tri-Y gathers the primaries in two stages — four into two, then into one — instead of a single four-into-one merge. The intent is a broader low and mid-range character, which suits a heavier ute body that spends time loaded or towing. These headers replace the cast factory manifolds as the first section of the exhaust and feed a 3in system rearward. Pacemaker doesn't publish material or sound figures for this part, so we don't quote any.
Will it suit my HSV ute?
It is listed to fit the V8 HSV VU and VY Series 1 ute. Confirm your ute is a Series 1 with the workshop before ordering, since the listing is specific and feed data isn't perfect. The listed RRP is $4265.74.
What does fitting involve at our Illawarra workshop?
Oak Flats Muffler Men supplies and fits these Pacemaker ute headers in-house across the Illawarra. We pull the old manifolds, fit fresh gaskets, and check clearance where the 3in system runs back under the tray. It is a special-order set, so we confirm the fitment and lead time with you first.
Stocked and fitted by Oak Flats Muffler Men, the Illawarra exhaust and 4x4 specialist in Oak Flats, NSW.
Common questions
- Is the PP5367-73 listed for the sedan or the ute?
- The ute. It is listed to fit the HSV VU and VY Series 1 ute, with routing for the ute body.
- Will it fit a VY Series 2 HSV ute?
- No — it is listed for the HSV VU and VY Series 1 ute. Confirm your series with the workshop before ordering.
- What merge design is it?
- A Tri-Y, which merges the primaries in two stages for a broader low and mid-range spread, feeding a 3in system.
Fitment support across the Illawarra
Fitment checks near you across 18 Illawarra suburbs, from Oak Flats and Shellharbour to Wollongong and Kiama.Show nearby fitment areasCollapse section
Oak Flats Muffler Men can check this part against supplier specs, part number, image, RRP and vehicle details for customers around Oak Flats, Shellharbour, Wollongong, Dapto, Albion Park, Kiama and the northern suburbs.
Check fitment near Oak FlatsCheck fitment near Albion Park RailCheck fitment near ShellharbourCheck fitment near WollongongCheck fitment near DaptoCheck fitment near WarillaCheck fitment near CorrimalCheck fitment near WoononaCheck fitment near BulliCheck fitment near ThirroulCheck fitment near KiamaCheck fitment near Albion ParkCheck fitment near Lake IllawarraCheck fitment near Mount WarrigalCheck fitment near Barrack HeightsCheck fitment near Barrack PointCheck fitment near BlackbuttCheck fitment near Flinders
Related parts in this category
More extractors and headers the workshop supplies and fits. Send the vehicle and the part you are weighing up for a fitted quote.
HSV VE (E Series) E2 From Sep 2009 - Aug 2010 LS2 V8 1 7/8" 4 into 1
PacemakerRRP$5060.93HSV VE (E Series) E2 From Sep 2009 - Aug 2010 LS2 V8 1 7/8" 4 into 1 Headers 3" Sedan Only System.
View part
HSV E2 VE 8 Cylinder 6.0L / 6.2L Gen IV, LS2, LS3, Tri-Y Headers 3" Inch
PacemakerRRP$4944.11HSV E2 VE 8 Cylinder 6.0L / 6.2L Gen IV, LS2, LS3, Tri-Y Headers 3" Inch System.
View part
HSV VE (E Series) E1 From Sep 2006 - Aug 2009 LS2 V8 1 7/8" 4 into 1
PacemakerRRP$4891.13Pacemaker HSV VE (E Series) E1 From Sep 2006 - Aug 2009 LS2 V8 1 7/8" 4 into 1 Competition Headers 3" Sedan System.
View part
HSV VE (E Series) E2 From Sep 2009 - Aug 2010 LS2 V8 1 3/4" 4 into 1
PacemakerRRP$4890.77Pacemaker HSV VE (E Series) E2 From Sep 2009 - Aug 2010 LS2 V8 1 3/4" 4 into 1 Header 2 1/2" Sedan Only System.
View part
HSV VE (E Series) E2 From Sep 2009 - Aug 2010 LS2 V8 1 7/8" 4 into 1
PacemakerRRP$4890.77HSV VE (E Series) E2 From Sep 2009 - Aug 2010 LS2 V8 1 7/8" 4 into 1 Competition Headers 2 1/2" Sedan System (PP5382-03) at $4890.77 RRP.
View partBook the right exhaust job without guessing.
Send the vehicle make, model, year, engine, current issue, desired sound or performance goal, and clear photos of the existing exhaust where available.