HSV VE (E Series) E2 Sep 2009 - Aug 2010 LS2 V8 1 3/4" 4 into 1 Headers
PacemakerRRP$5060.93HSV VE (E Series) E2 Sep 2009 - Aug 2010 LS2 V8 1 3/4" 4 into 1 Headers 3" Sedan Only System (SKU: PP5381-63), $5060.93 from Pacemaker. Engineered
View partPP5367-74
HSV VU and VY Series 1 8 Cylinder Ute Try-Y Headers 3" Inch System With Rear Pipe Only
HSV VU and VY Series 1 8 Cylinder Ute Try-Y Headers 3" Inch System With Rear Pipe Only.
BrandPacemaker
Category: Extractors and headers
RRP $3942.72 AUD
Confirmed on orderAfterpay, Zip Pay & Zip Money available
Part specs
- SKU
- PP5367-74
- Supplier
- Pacemaker
- Category
- Extractors and headers
- Vehicle fitment
- Hsv Vu Vx Vy
- Stock status
- Confirmed on order
The Pacemaker PP5367-74 is a tri-Y header package built around the earliest of the HSV utes — the VU and VY Series 1 eight-cylinder cab-chassis. It runs a 3in system and is supplied as the rear-pipe-only build, so it's the full back-half rather than a tailpipe swap.
What makes the tri-Y layout the point of this package?
Where a 4-into-1 merges all four runners at once, a tri-Y pairs the runners and merges them in two stages. On a road-driven HSV ute that staged merge is chosen for a broader spread of pull through the middle of the rev range rather than a single high-rpm peak, which suits a vehicle that spends its life loaded, towing or just commuting. The PP5367-74 carries that tri-Y geometry through into the 3in pipework behind it.
What does the rear-pipe-only build include?
This SKU is the rear-pipe-only configuration, meaning it's supplied as the back section of the system to suit the listed ute rather than a tip or muffler swap on its own. It's sized at 3in. Pacemaker doesn't publish a material grade for this listing, so we won't state one — confirm the exact pipe and finish with the workshop when you book.
Will it suit my VU or VY Series 1 HSV ute?
It's listed to fit the HSV ute in VU and VY Series 1 eight-cylinder form. HSV utes of this era carry their own underbody routing around the tray and rear cradle, so before ordering we confirm your exact build, because feed data can lag a real vehicle. Send your VIN or build details and we'll check it against the listing.
What does fitting involve at our Illawarra workshop?
Oak Flats Muffler Men supplies and fits Pacemaker tri-Y systems like this in-house across the Illawarra. We mount the headers, route the 3in rear pipe to the factory hanger points, and check clearance to the tray, fuel lines and rear cradle before the ute leaves the hoist.
Stocked and fitted by Oak Flats Muffler Men, the Illawarra exhaust and 4x4 specialist in Oak Flats, NSW.
Common questions
- Is the PP5367-74 a complete bumper-to-bumper system?
- No. It's the rear-pipe-only build for the listed HSV ute, supplied as the back section to suit a 3in setup rather than a full front-to-rear system.
- Why tri-Y instead of a 4-into-1 on a ute?
- The tri-Y merges the runners in two stages, which is generally chosen for a broader mid-range character on a road and towing vehicle. The actual gain depends on the rest of the build.
- Does it fit a VY Series 2 ute?
- This listing is for the VU and VY Series 1 eight-cylinder ute. Confirm your exact series with the workshop, as there are separate Pacemaker part numbers for later utes.
Fitment support across the Illawarra
Fitment checks near you across 18 Illawarra suburbs, from Oak Flats and Shellharbour to Wollongong and Kiama.Show nearby fitment areasCollapse section
Oak Flats Muffler Men can check this part against supplier specs, part number, image, RRP and vehicle details for customers around Oak Flats, Shellharbour, Wollongong, Dapto, Albion Park, Kiama and the northern suburbs.
Check fitment near Oak FlatsCheck fitment near Albion Park RailCheck fitment near ShellharbourCheck fitment near WollongongCheck fitment near DaptoCheck fitment near WarillaCheck fitment near CorrimalCheck fitment near WoononaCheck fitment near BulliCheck fitment near ThirroulCheck fitment near KiamaCheck fitment near Albion ParkCheck fitment near Lake IllawarraCheck fitment near Mount WarrigalCheck fitment near Barrack HeightsCheck fitment near Barrack PointCheck fitment near BlackbuttCheck fitment near Flinders
Related parts in this category
More extractors and headers the workshop supplies and fits. Send the vehicle and the part you are weighing up for a fitted quote.
HSV VE (E Series) E2 From Sep 2009 - Aug 2010 LS2 V8 1 7/8" 4 into 1
PacemakerRRP$5060.93HSV VE (E Series) E2 From Sep 2009 - Aug 2010 LS2 V8 1 7/8" 4 into 1 Headers 3" Sedan Only System.
View part
HSV E2 VE 8 Cylinder 6.0L / 6.2L Gen IV, LS2, LS3, Tri-Y Headers 3" Inch
PacemakerRRP$4944.11HSV E2 VE 8 Cylinder 6.0L / 6.2L Gen IV, LS2, LS3, Tri-Y Headers 3" Inch System.
View part
HSV VE (E Series) E1 From Sep 2006 - Aug 2009 LS2 V8 1 7/8" 4 into 1
PacemakerRRP$4891.13Pacemaker HSV VE (E Series) E1 From Sep 2006 - Aug 2009 LS2 V8 1 7/8" 4 into 1 Competition Headers 3" Sedan System.
View part
HSV VE (E Series) E2 From Sep 2009 - Aug 2010 LS2 V8 1 3/4" 4 into 1
PacemakerRRP$4890.77Pacemaker HSV VE (E Series) E2 From Sep 2009 - Aug 2010 LS2 V8 1 3/4" 4 into 1 Header 2 1/2" Sedan Only System.
View part
HSV VE (E Series) E2 From Sep 2009 - Aug 2010 LS2 V8 1 7/8" 4 into 1
PacemakerRRP$4890.77HSV VE (E Series) E2 From Sep 2009 - Aug 2010 LS2 V8 1 7/8" 4 into 1 Competition Headers 2 1/2" Sedan System (PP5382-03) at $4890.77 RRP.
View partBook the right exhaust job without guessing.
Send the vehicle make, model, year, engine, current issue, desired sound or performance goal, and clear photos of the existing exhaust where available.