HSV VE (E Series) E2 Sep 2009 - Aug 2010 LS2 V8 1 3/4" 4 into 1 Headers
PacemakerRRP$5060.93HSV VE (E Series) E2 Sep 2009 - Aug 2010 LS2 V8 1 3/4" 4 into 1 Headers 3" Sedan Only System (SKU: PP5381-63), $5060.93 from Pacemaker. Engineered
View partPP5367-75
HSV VY Series 2 - VZ 5.7 8 Cylinder Ute Try-Y Headers 3" Inch System With Rear Pipe Only
HSV VY Series 2 - VZ 5.7 8 Cylinder Ute Try-Y Headers 3" Inch System With Rear Pipe Only (SKU: PP5367-75), $4041.85 from Pacemaker.
BrandPacemaker
Category: Extractors and headers
RRP $4041.85 AUD
Confirmed on orderAfterpay, Zip Pay & Zip Money available
Part specs
- SKU
- PP5367-75
- Supplier
- Pacemaker
- Category
- Extractors and headers
- Vehicle fitment
- Hsv Vy Vz
- Stock status
- Confirmed on order
Where its sibling covers the early HSV utes, the Pacemaker PP5367-75 picks up the next chapter: the VY Series 2 and VZ eight-cylinder utes in 5.7-litre form. It's a tri-Y header and 3in system, supplied rear-pipe-only.
What's the VY Series 2 / VZ 5.7 fitment about?
This SKU is listed specifically to the VY Series 2 and VZ utes running the 5.7 eight-cylinder. The body and underbody hardware shifted across the VY-to-VZ span, so Pacemaker splits the ute headers by era — the PP5367-75 is the 5.7 build for that window, not an early VU/VY-1 fit. We confirm your exact ute against the listing before ordering.
Why is this one a tri-Y?
The tri-Y design pairs the four runners and merges them in two steps rather than all at once. On a street and towing ute that's the layout typically chosen for a fuller mid-range rather than chasing a top-end peak. The PP5367-75 keeps that two-stage merge feeding into 3in pipework.
What does rear-pipe-only mean here?
It's supplied as the rear-pipe-only build to suit a 3in setup — the back section of the system rather than a muffler or tip on its own. Pacemaker doesn't list a material grade for this part, so we won't quote one; the workshop confirms the pipe and finish at the time of fitting.
How does fitting work in the Illawarra?
Oak Flats Muffler Men fits these Pacemaker tri-Y ute systems on-site. We bolt up the headers, route the 3in rear pipe to the factory mounts, and check clearance to the tray and rear cradle. It's listed to fit the HSV VY Series 2 and VZ 5.7 ute; send your build and we'll book the bay.
Stocked and fitted by Oak Flats Muffler Men, the Illawarra exhaust and 4x4 specialist in Oak Flats, NSW.
Common questions
- Does the PP5367-75 fit a VZ 6.0L ute?
- No — this listing is the 5.7 build for the VY Series 2 and VZ ute. The 6.0L ute has its own Pacemaker part number. Confirm your engine with the workshop.
- Is anything forward of the rear pipe included?
- It's supplied rear-pipe-only: the back section to suit a 3in system for the listed ute, not a full front-to-rear kit.
- Will it bolt to the factory hangers?
- It's listed to route to the factory location on the VY Series 2 / VZ ute. We confirm clearance and hanger points on the hoist before completing the fit.
Fitment support across the Illawarra
Fitment checks near you across 18 Illawarra suburbs, from Oak Flats and Shellharbour to Wollongong and Kiama.Show nearby fitment areasCollapse section
Oak Flats Muffler Men can check this part against supplier specs, part number, image, RRP and vehicle details for customers around Oak Flats, Shellharbour, Wollongong, Dapto, Albion Park, Kiama and the northern suburbs.
Check fitment near Oak FlatsCheck fitment near Albion Park RailCheck fitment near ShellharbourCheck fitment near WollongongCheck fitment near DaptoCheck fitment near WarillaCheck fitment near CorrimalCheck fitment near WoononaCheck fitment near BulliCheck fitment near ThirroulCheck fitment near KiamaCheck fitment near Albion ParkCheck fitment near Lake IllawarraCheck fitment near Mount WarrigalCheck fitment near Barrack HeightsCheck fitment near Barrack PointCheck fitment near BlackbuttCheck fitment near Flinders
Related parts in this category
More extractors and headers the workshop supplies and fits. Send the vehicle and the part you are weighing up for a fitted quote.
HSV VE (E Series) E2 From Sep 2009 - Aug 2010 LS2 V8 1 7/8" 4 into 1
PacemakerRRP$5060.93HSV VE (E Series) E2 From Sep 2009 - Aug 2010 LS2 V8 1 7/8" 4 into 1 Headers 3" Sedan Only System.
View part
HSV E2 VE 8 Cylinder 6.0L / 6.2L Gen IV, LS2, LS3, Tri-Y Headers 3" Inch
PacemakerRRP$4944.11HSV E2 VE 8 Cylinder 6.0L / 6.2L Gen IV, LS2, LS3, Tri-Y Headers 3" Inch System.
View part
HSV VE (E Series) E1 From Sep 2006 - Aug 2009 LS2 V8 1 7/8" 4 into 1
PacemakerRRP$4891.13Pacemaker HSV VE (E Series) E1 From Sep 2006 - Aug 2009 LS2 V8 1 7/8" 4 into 1 Competition Headers 3" Sedan System.
View part
HSV VE (E Series) E2 From Sep 2009 - Aug 2010 LS2 V8 1 3/4" 4 into 1
PacemakerRRP$4890.77Pacemaker HSV VE (E Series) E2 From Sep 2009 - Aug 2010 LS2 V8 1 3/4" 4 into 1 Header 2 1/2" Sedan Only System.
View part
HSV VE (E Series) E2 From Sep 2009 - Aug 2010 LS2 V8 1 7/8" 4 into 1
PacemakerRRP$4890.77HSV VE (E Series) E2 From Sep 2009 - Aug 2010 LS2 V8 1 7/8" 4 into 1 Competition Headers 2 1/2" Sedan System (PP5382-03) at $4890.77 RRP.
View partBook the right exhaust job without guessing.
Send the vehicle make, model, year, engine, current issue, desired sound or performance goal, and clear photos of the existing exhaust where available.