HSV VE (E Series) E2 Sep 2009 - Aug 2010 LS2 V8 1 3/4" 4 into 1 Headers
PacemakerRRP$5060.93HSV VE (E Series) E2 Sep 2009 - Aug 2010 LS2 V8 1 3/4" 4 into 1 Headers 3" Sedan Only System (SKU: PP5381-63), $5060.93 from Pacemaker. Engineered
View partPP5367-76
HSV VZ 6.0L 8 Cylinder Ute Try-Y Headers 3" Inch System With Rear Pipe Only
HSV VZ 6.0L 8 Cylinder Ute Try-Y Headers 3" Inch System With Rear Pipe Only. Fast.
BrandPacemaker
Category: Extractors and headers
RRP $4140.97 AUD
Confirmed on orderAfterpay, Zip Pay & Zip Money available
Part specs
- SKU
- PP5367-76
- Supplier
- Pacemaker
- Category
- Extractors and headers
- Vehicle fitment
- Hsv Vz
- Stock status
- Confirmed on order
The 6.0-litre VZ ute gets its own listing in this Pacemaker range, and the PP5367-76 is it — a tri-Y header and 3in system for the HSV VZ 6.0L eight-cylinder, supplied rear-pipe-only.
Why a dedicated 6.0L part number?
Pacemaker lists this SKU specifically to the VZ ute in 6.0L form rather than lumping it with the 5.7 cars. The 6.0L is the later engine in the VZ ute, and matching the header runners and the 3in system to that engine and its mounting is why it carries its own part number, the PP5367-76. We check your engine against the listing before you order.
What does the tri-Y design bring?
This is a tri-Y, so the four runners are paired and merged in two stages instead of all at once. On a road-going V8 ute that staged merge is generally chosen for a broader mid-range pull — useful on a vehicle that tows and carries. The PP5367-76 routes that geometry into 3in pipework.
What's in the rear-pipe-only build?
It's supplied rear-pipe-only to suit a 3in setup: the back section of the system for the listed ute, not a tip or muffler change. No material grade is published by Pacemaker for this listing, so we won't state one — the workshop confirms the pipe spec and finish at fitting.
What does fitting involve at our workshop?
Oak Flats Muffler Men supplies and fits these Pacemaker tri-Y ute systems across the Illawarra. We mount the headers to the 6.0L, route the 3in rear pipe to the factory hangers, and verify clearance to the tray and rear cradle. It's listed to fit the HSV VZ 6.0L ute; confirm your build with us first.
Stocked and fitted by Oak Flats Muffler Men, the Illawarra exhaust and 4x4 specialist in Oak Flats, NSW.
Common questions
- Will the PP5367-76 suit a 5.7 VZ ute?
- No. This is the 6.0L listing for the VZ ute. The 5.7 ute uses a different Pacemaker part number — confirm your engine with the workshop.
- Is this the full exhaust or just the back section?
- It's the rear-pipe-only build — the back section to suit a 3in system for the listed ute, not a complete front-to-rear system.
- Can you fit it and supply the front section too?
- Yes. We can build and fit the matching front pipework at the workshop to complete the 3in system. Bring your ute in and we'll spec it.
Fitment support across the Illawarra
Fitment checks near you across 18 Illawarra suburbs, from Oak Flats and Shellharbour to Wollongong and Kiama.Show nearby fitment areasCollapse section
Oak Flats Muffler Men can check this part against supplier specs, part number, image, RRP and vehicle details for customers around Oak Flats, Shellharbour, Wollongong, Dapto, Albion Park, Kiama and the northern suburbs.
Check fitment near Oak FlatsCheck fitment near Albion Park RailCheck fitment near ShellharbourCheck fitment near WollongongCheck fitment near DaptoCheck fitment near WarillaCheck fitment near CorrimalCheck fitment near WoononaCheck fitment near BulliCheck fitment near ThirroulCheck fitment near KiamaCheck fitment near Albion ParkCheck fitment near Lake IllawarraCheck fitment near Mount WarrigalCheck fitment near Barrack HeightsCheck fitment near Barrack PointCheck fitment near BlackbuttCheck fitment near Flinders
Related parts in this category
More extractors and headers the workshop supplies and fits. Send the vehicle and the part you are weighing up for a fitted quote.
HSV VE (E Series) E2 From Sep 2009 - Aug 2010 LS2 V8 1 7/8" 4 into 1
PacemakerRRP$5060.93HSV VE (E Series) E2 From Sep 2009 - Aug 2010 LS2 V8 1 7/8" 4 into 1 Headers 3" Sedan Only System.
View part
HSV E2 VE 8 Cylinder 6.0L / 6.2L Gen IV, LS2, LS3, Tri-Y Headers 3" Inch
PacemakerRRP$4944.11HSV E2 VE 8 Cylinder 6.0L / 6.2L Gen IV, LS2, LS3, Tri-Y Headers 3" Inch System.
View part
HSV VE (E Series) E1 From Sep 2006 - Aug 2009 LS2 V8 1 7/8" 4 into 1
PacemakerRRP$4891.13Pacemaker HSV VE (E Series) E1 From Sep 2006 - Aug 2009 LS2 V8 1 7/8" 4 into 1 Competition Headers 3" Sedan System.
View part
HSV VE (E Series) E2 From Sep 2009 - Aug 2010 LS2 V8 1 3/4" 4 into 1
PacemakerRRP$4890.77Pacemaker HSV VE (E Series) E2 From Sep 2009 - Aug 2010 LS2 V8 1 3/4" 4 into 1 Header 2 1/2" Sedan Only System.
View part
HSV VE (E Series) E2 From Sep 2009 - Aug 2010 LS2 V8 1 7/8" 4 into 1
PacemakerRRP$4890.77HSV VE (E Series) E2 From Sep 2009 - Aug 2010 LS2 V8 1 7/8" 4 into 1 Competition Headers 2 1/2" Sedan System (PP5382-03) at $4890.77 RRP.
View partBook the right exhaust job without guessing.
Send the vehicle make, model, year, engine, current issue, desired sound or performance goal, and clear photos of the existing exhaust where available.