HSV VE (E Series) E2 Sep 2009 - Aug 2010 LS2 V8 1 3/4" 4 into 1 Headers
PacemakerRRP$5060.93HSV VE (E Series) E2 Sep 2009 - Aug 2010 LS2 V8 1 3/4" 4 into 1 Headers 3" Sedan Only System (SKU: PP5381-63), $5060.93 from Pacemaker. Engineered
View partPP5382-05
HSV VF GEN-F May 2013 - Sep 2015 LS3 V8 (Factory Fixed Exhaust Tips) 1 7/8" 4 Into 1
HSV VF GEN-F May 2013 - Sep 2015 LS3 V8 (Factory Fixed Exhaust Tips) 1 7/8" 4 Into 1 Competition Headers 2 1/2" Sedan System.
BrandPacemaker
Category: Extractors and headers
RRP $4520.24 AUD
Confirmed on orderAfterpay, Zip Pay & Zip Money available
Part specs
- SKU
- PP5382-05
- Supplier
- Pacemaker
- Category
- Extractors and headers
- Vehicle fitment
- Hsv Vf
- Stock status
- Confirmed on order
Worked back to the HSV's factory fixed exhaust tips, the Pacemaker PP5382-05 runs competition 1⅞ in 4-into-1 headers into a 2½ in sedan system, listed to fit the VF Gen-F (LS3 V8) from May 2013. The fixed-tip rear is the fitment detail this sedan package is built around.
What does the factory fixed-tip rear mean here?
The Gen-F sedan has integrated fixed exhaust tips rather than a free tailpipe, so the 2½ in system has to be routed to finish at those tips. That's the constraint this part is shaped around and what distinguishes it from a generic VF sedan system — the rear has to meet the factory fixed-tip location.
What does the competition 1⅞ in 4-into-1 suit?
The four 1⅞ in primaries gather into a single 4-into-1 collector and feed the 2½ in run. At 1⅞ in the primary is the larger competition bore — built for higher-rpm, higher-output LS3 work, trading low-down velocity for top-end flow. It replaces the cast manifolds with mandrel-bent tube.
Will it suit my Gen-F sedan?
It's listed to fit the HSV VF Gen-F (LS3 V8) sedan from May 2013, with factory fixed exhaust tips. We treat that as listed-to-fit and confirm against your exact car before ordering — the fixed-tip rear is the part to verify.
What does fitting involve at our Illawarra workshop?
Oak Flats Muffler Men fits these competition headers across the Illawarra. We match the listing to your Gen-F sedan, remove the cast manifolds, fit the 1⅞ in primaries to the collectors, and run the 2½ in system back to the factory fixed tips on fresh gaskets. RRP is listed at 4520.24 AUD; fitting is quoted on the vehicle.
Stocked and fitted by Oak Flats Muffler Men, the Illawarra exhaust and 4x4 specialist in Oak Flats, NSW.
Common questions
- Does the PP5382-05 suit the factory fixed tips?
- Yes — it's listed for the Gen-F with factory fixed exhaust tips, and the 2½ in system is routed to finish at that fixed-tip rear.
- What primary size are these headers?
- 1⅞ in competition primaries into a 4-into-1 collector — the larger, higher-rpm bore.
Fitment support across the Illawarra
Fitment checks near you across 18 Illawarra suburbs, from Oak Flats and Shellharbour to Wollongong and Kiama.Show nearby fitment areasCollapse section
Oak Flats Muffler Men can check this part against supplier specs, part number, image, RRP and vehicle details for customers around Oak Flats, Shellharbour, Wollongong, Dapto, Albion Park, Kiama and the northern suburbs.
Check fitment near Oak FlatsCheck fitment near Albion Park RailCheck fitment near ShellharbourCheck fitment near WollongongCheck fitment near DaptoCheck fitment near WarillaCheck fitment near CorrimalCheck fitment near WoononaCheck fitment near BulliCheck fitment near ThirroulCheck fitment near KiamaCheck fitment near Albion ParkCheck fitment near Lake IllawarraCheck fitment near Mount WarrigalCheck fitment near Barrack HeightsCheck fitment near Barrack PointCheck fitment near BlackbuttCheck fitment near Flinders
Related parts in this category
More extractors and headers the workshop supplies and fits. Send the vehicle and the part you are weighing up for a fitted quote.
HSV VE (E Series) E2 From Sep 2009 - Aug 2010 LS2 V8 1 7/8" 4 into 1
PacemakerRRP$5060.93HSV VE (E Series) E2 From Sep 2009 - Aug 2010 LS2 V8 1 7/8" 4 into 1 Headers 3" Sedan Only System.
View part
HSV E2 VE 8 Cylinder 6.0L / 6.2L Gen IV, LS2, LS3, Tri-Y Headers 3" Inch
PacemakerRRP$4944.11HSV E2 VE 8 Cylinder 6.0L / 6.2L Gen IV, LS2, LS3, Tri-Y Headers 3" Inch System.
View part
HSV VE (E Series) E1 From Sep 2006 - Aug 2009 LS2 V8 1 7/8" 4 into 1
PacemakerRRP$4891.13Pacemaker HSV VE (E Series) E1 From Sep 2006 - Aug 2009 LS2 V8 1 7/8" 4 into 1 Competition Headers 3" Sedan System.
View part
HSV VE (E Series) E2 From Sep 2009 - Aug 2010 LS2 V8 1 3/4" 4 into 1
PacemakerRRP$4890.77Pacemaker HSV VE (E Series) E2 From Sep 2009 - Aug 2010 LS2 V8 1 3/4" 4 into 1 Header 2 1/2" Sedan Only System.
View part
HSV VE (E Series) E2 From Sep 2009 - Aug 2010 LS2 V8 1 7/8" 4 into 1
PacemakerRRP$4890.77HSV VE (E Series) E2 From Sep 2009 - Aug 2010 LS2 V8 1 7/8" 4 into 1 Competition Headers 2 1/2" Sedan System (PP5382-03) at $4890.77 RRP.
View partBook the right exhaust job without guessing.
Send the vehicle make, model, year, engine, current issue, desired sound or performance goal, and clear photos of the existing exhaust where available.