HSV VE (E Series) E2 Sep 2009 - Aug 2010 LS2 V8 1 3/4" 4 into 1 Headers
PacemakerRRP$5060.93HSV VE (E Series) E2 Sep 2009 - Aug 2010 LS2 V8 1 3/4" 4 into 1 Headers 3" Sedan Only System (SKU: PP5381-63), $5060.93 from Pacemaker. Engineered
View partPP5387-02
HSV E1 VE 8 Cylinder 6.0L / 6.2L Gen IV, LS2, LS3, Tri-Y Headers 2 1/2 Inch System
HSV E1 VE 8 Cylinder 6.0L / 6.2L Gen IV, LS2, LS3, Tri-Y Headers 2 1/2 Inch System.
BrandPacemaker
Category: Extractors and headers
RRP $4604.16 AUD
Confirmed on orderAfterpay, Zip Pay & Zip Money available
Part specs
- SKU
- PP5387-02
- Supplier
- Pacemaker
- Category
- Extractors and headers
- Vehicle fitment
- Hsv Ve
- Stock status
- Confirmed on order
The Pacemaker PP5387-02 is a set of Tri-Y headers with a 2-1/2in system, listed to fit the HSV VE E1, 8-cylinder 6.0L and 6.2L Gen IV LS2 and LS3. It's a header-back package using a Tri-Y primary design.
What does this kit cover?
This bundles Tri-Y headers off the heads with a matching 2-1/2in system for the HSV VE E1 with the Gen IV LS2/LS3 V8. The headers replace the factory cast manifolds and the 2-1/2in pipe carries the gases rearward. The Tri-Y design and 2-1/2in sizing give it a different bias to the larger competition kits in the family.
What is a Tri-Y header and what does it change?
A Tri-Y header pairs the primary tubes in two stages — four primaries merge into two, then into one — rather than a single four-into-one merge. The aim is a broader spread of low and mid-range response. It bolts to the cylinder heads as the first section of the exhaust, and the honest trade-offs are a changed note and added road-compliance considerations, so it suits owners after a deliberate change.
Will it suit my HSV VE E1?
It's listed to fit the HSV VE E-Series E1 with the 6.0L or 6.2L Gen IV LS2/LS3 V8. That's supplier feed data rather than a guarantee, so confirm your exact series and engine with the workshop before ordering.
What does fitting involve at our Illawarra workshop?
Oak Flats Muffler Men sells and fits this Pacemaker package in-house in the Illawarra. Header work on the LS V8 means manifold removal, fresh gaskets and clearance checks against the 2-1/2in system, so we verify the fitment to your HSV and book the hoist. The listed RRP is $4604.16.
Stocked and fitted by Oak Flats Muffler Men, the Illawarra exhaust and 4x4 specialist in Oak Flats, NSW.
Common questions
- What style of headers are the PP5387-02?
- They are Tri-Y headers matched to a 2-1/2in system, listed for the HSV VE E1 with the Gen IV LS2/LS3 V8.
- Which HSV does it suit?
- It is listed to fit the HSV VE E-Series E1 with the 6.0L or 6.2L LS2/LS3 V8. Confirm your exact series with the workshop.
- What size is the system?
- The matching system listed with these headers is 2-1/2in.
Fitment support across the Illawarra
Fitment checks near you across 18 Illawarra suburbs, from Oak Flats and Shellharbour to Wollongong and Kiama.Show nearby fitment areasCollapse section
Oak Flats Muffler Men can check this part against supplier specs, part number, image, RRP and vehicle details for customers around Oak Flats, Shellharbour, Wollongong, Dapto, Albion Park, Kiama and the northern suburbs.
Check fitment near Oak FlatsCheck fitment near Albion Park RailCheck fitment near ShellharbourCheck fitment near WollongongCheck fitment near DaptoCheck fitment near WarillaCheck fitment near CorrimalCheck fitment near WoononaCheck fitment near BulliCheck fitment near ThirroulCheck fitment near KiamaCheck fitment near Albion ParkCheck fitment near Lake IllawarraCheck fitment near Mount WarrigalCheck fitment near Barrack HeightsCheck fitment near Barrack PointCheck fitment near BlackbuttCheck fitment near Flinders
Related parts in this category
More extractors and headers the workshop supplies and fits. Send the vehicle and the part you are weighing up for a fitted quote.
HSV VE (E Series) E2 From Sep 2009 - Aug 2010 LS2 V8 1 7/8" 4 into 1
PacemakerRRP$5060.93HSV VE (E Series) E2 From Sep 2009 - Aug 2010 LS2 V8 1 7/8" 4 into 1 Headers 3" Sedan Only System.
View part
HSV E2 VE 8 Cylinder 6.0L / 6.2L Gen IV, LS2, LS3, Tri-Y Headers 3" Inch
PacemakerRRP$4944.11HSV E2 VE 8 Cylinder 6.0L / 6.2L Gen IV, LS2, LS3, Tri-Y Headers 3" Inch System.
View part
HSV VE (E Series) E1 From Sep 2006 - Aug 2009 LS2 V8 1 7/8" 4 into 1
PacemakerRRP$4891.13Pacemaker HSV VE (E Series) E1 From Sep 2006 - Aug 2009 LS2 V8 1 7/8" 4 into 1 Competition Headers 3" Sedan System.
View part
HSV VE (E Series) E2 From Sep 2009 - Aug 2010 LS2 V8 1 3/4" 4 into 1
PacemakerRRP$4890.77Pacemaker HSV VE (E Series) E2 From Sep 2009 - Aug 2010 LS2 V8 1 3/4" 4 into 1 Header 2 1/2" Sedan Only System.
View part
HSV VE (E Series) E2 From Sep 2009 - Aug 2010 LS2 V8 1 7/8" 4 into 1
PacemakerRRP$4890.77HSV VE (E Series) E2 From Sep 2009 - Aug 2010 LS2 V8 1 7/8" 4 into 1 Competition Headers 2 1/2" Sedan System (PP5382-03) at $4890.77 RRP.
View partBook the right exhaust job without guessing.
Send the vehicle make, model, year, engine, current issue, desired sound or performance goal, and clear photos of the existing exhaust where available.