PR541S-1696

PR541S 1696 Shock Absorber Nitro for Toyota Prado 150 Series Gjr150, Kdj150, KDJ155

PR541S 1696 Shock Absorber Nitro. Quality guaranteed.

BrandRAW 4x4

Category: Suspension and 4x4 parts

RRP pending
Confirmed on order
Afterpay, Zip Pay & Zip Money available
Afterpay acceptedZip accepted — Zip Pay and Zip Money
PR541S 1696 Shock Absorber Nitro for Toyota Prado 150 Series Gjr150, Kdj150, KDJ155 without Kdss LWB & SWB… product image

Part specs

heights
['40mm']
positions
['Front']
shock_types
['predator']
vehicle_count
2

RAW 4x4 lists the PR541S-1696 as a Nitro shock for the Toyota Prado 150 Series without KDSS, covering the GJR150, KDJ150 and KDJ155 codes in LWB and SWB. The 1696 suffix marks one application in the PR541S range.

The non-KDSS distinction

Toyota offered the 150 Series Prado with and without KDSS, its hydraulic sway-bar system, and the two run different suspension hardware. This listing is the non-KDSS one. The PR541S-1696 suits the GJR150, KDJ150 and KDJ155 in both wheelbases — but confirming your KDSS status first is the single most important fitment check on this part.

What the 1696 suffix is

Within the PR541S family, the trailing 1696 is a supplier application code. It isn't a year, an engine or a dimension, so we don't read a spec out of it. RAW 4x4 also doesn't publish a length or valving figure for this MPN, and none is invented here.

What the shock does on a 150

The damper keeps the Prado's body composed over the springs — settling it after a bump and holding the tyres down on a corrugated track. The PR541S-1696 is a factory-replacement Nitro unit; it controls movement and doesn't alter the wagon's height, which the springs set.

Fitting at our Illawarra workshop

Oak Flats Muffler Men fits Prado dampers at Oak Flats for the Illawarra. We confirm KDSS status and your chassis code, special-order the PR541S-1696, fit it and check clearance and ride. Send your GJR150, KDJ150 or KDJ155 details and we'll line up the right unit.

Stocked and fitted by Oak Flats Muffler Men, the Illawarra exhaust and 4x4 specialist in Oak Flats, NSW.

Common questions

Does PR541S-1696 suit a KDSS Prado?
No — it's listed for the 150 Series WITHOUT KDSS (GJR150, KDJ150, KDJ155). Confirm your KDSS status with the workshop first.
Is the 1696 a year?
No, it's a RAW 4x4 part-number suffix, not a model year.
Does it fit LWB and SWB?
It's listed for both LWB and SWB non-KDSS 150 Series. Confirm your exact code before ordering.

Fitment support across the Illawarra

Fitment checks near you across 18 Illawarra suburbs, from Oak Flats and Shellharbour to Wollongong and Kiama.
Show nearby fitment areasCollapse section

Book the right exhaust job without guessing.

Send the vehicle make, model, year, engine, current issue, desired sound or performance goal, and clear photos of the existing exhaust where available.