PR977S

PR977S Shock Absorber Nitro for Toyota FJ Cruiser Gsj15, GSJ15R Wagon 4.0l V6

RAW 4x4 PR977S Shock Absorber Nitro.0l V6.

BrandRAW 4x4

Category: Suspension and 4x4 parts

RRP pending
Confirmed on order
Afterpay, Zip Pay & Zip Money available
Afterpay acceptedZip accepted — Zip Pay and Zip Money
PR977S Shock Absorber Nitro for Toyota FJ Cruiser Gsj15, GSJ15R Wagon 4.0l V6 product image

Part specs

heights
['40mm', '50mm']
positions
['Rear']
shock_types
['predator']
vehicle_count
3

For the boxy FJ Cruiser, the RAW 4x4 PR977S is a Nitro-line shock absorber listed to fit the Toyota FJ Cruiser GSJ15 GSJ15R wagon 4.0L V6 — the corner damper that keeps a tall, short-wheelbase wagon planted.

A tall wagon needs its dampers honest

The FJ Cruiser sits high on a stubby wheelbase, so body movement is felt more than on a long ute. The PR977S is the shock that governs that movement — it slows the spring's compression and rebound so the GSJ15 settles cleanly instead of rocking. RAW 4x4 lists it as a Nitro unit, its nitrogen-charged line; that's a build description, not a tested figure, so we don't put a number against it.

Front or rear on the GSJ15?

Damper choice follows the corner, the springs fitted and how the FJ is used. The PR977S is listed against the GSJ15 GSJ15R 4.0L V6 wagon as a starting point rather than a guarantee. Tell us which end you're doing and what's already under the truck, and we'll match the shock to the rest of the suspension before ordering.

Does a shock swap touch compliance?

Shocks are suspension parts, not emissions hardware, so the exhaust road-legality rules don't apply to a like-for-like replacement — that's ordinary maintenance. Where dampers are part of a lift, the wider NSW modification rules can come into play, and we'll talk those through with you when they do.

Fitting at our Illawarra workshop

Oak Flats Muffler Men fits shock absorbers in-house across the Illawarra, generally in axle pairs so the FJ Cruiser stays balanced side to side. Pricing on this line is confirmed on request — it can be a special-order item, so check current cost and availability with us before booking the bay.

Stocked and fitted by Oak Flats Muffler Men, the Illawarra exhaust and 4x4 specialist in Oak Flats, NSW.

Common questions

Will the PR977S fit my FJ Cruiser?
It's listed to fit the Toyota FJ Cruiser GSJ15 GSJ15R wagon 4.0L V6. Confirm the corner and your build with the workshop before ordering.
Should I replace shocks in pairs?
Yes — we fit dampers in axle pairs so both sides behave the same and the wagon stays balanced.
Are length or valving figures published?
No. RAW 4x4 doesn't publish those in our record, so we don't quote them — it's listed as the correct Nitro shock for this Toyota.

Fitment support across the Illawarra

Fitment checks near you across 18 Illawarra suburbs, from Oak Flats and Shellharbour to Wollongong and Kiama.
Show nearby fitment areasCollapse section

Book the right exhaust job without guessing.

Send the vehicle make, model, year, engine, current issue, desired sound or performance goal, and clear photos of the existing exhaust where available.