TB1547 Torsion BAR for Isuzu D MAX / Invader Tfs, R7, R9 UTE / Dual CAB
RAW 4x4RRP pendingTB1547 Torsion BAR.
View partRC-1102
RC 1102 Coil Spring for Landrover County 110 Series Wagon
RC 1102 Coil Spring for Landrover County 110 Series Wagon (v8 Petrol & 2.5l Diesel)models without Self… for selected vehicle applications.
BrandRAW 4x4
Category: Suspension and 4x4 parts
RRP pending
Confirmed on orderAfterpay, Zip Pay & Zip Money available
Part specs
- heights
- ['40mm']
- positions
- ['Rear']
- shock_types
- []
- vehicle_count
- 5
Sag in an old coil shows up as a wagon that sits low and bottoms early — and the RAW 4x4 RC-1102 is the replacement coil spring listed for the County 110-series wagon, covering V8-petrol and 2.5L-diesel builds without self-levelling. It is the load-bearing spring at the corner, not a packaged lift.
What is the RC-1102 there to restore?
A coil spring carries the vehicle's weight at its corner and gives the wheel room to travel before the suspension runs out of stroke. Years of touring and load-carrying settle a coil, dropping ride height and eating into bump travel. Fitting a fresh spring returns the standing height and the travel the County 110-series was designed around. Our record lists this as a coil application without a published rate or height target, so we confirm those with you rather than read them into the listing.
Does it match my County 110-series wagon?
It is listed to fit the County 110-series wagon in V8-petrol and 2.5L-diesel form, for the variants without self-levelling. Coil fitment is specific to the corner and the build — engine, body and option packs all change which spring is correct — so confirm your exact configuration with the workshop before ordering. We treat the listing as listed to fit, then match it to the vehicle in front of us.
How is it sourced and priced?
The RC-1102 is supplied through RAW 4x4. Pricing is confirmed at the time of order rather than carried as a fixed figure in our record, so it is quoted on enquiry. Springs like this are commonly ordered to the specific vehicle rather than held on the shelf, so a quick call lets us check current stock and lead time before you commit.
What's involved in fitting it at our Illawarra workshop?
Oak Flats Muffler Men supplies and fits suspension across the Illawarra. Replacing a coil means safely supporting the corner, releasing spring tension, swapping the spring and resetting ride height, then checking the surrounding mounts and bushes while access is good. Bring the County 110-series wagon in and we will confirm the application and book the work.
Stocked and fitted by Oak Flats Muffler Men, the Illawarra exhaust and 4x4 specialist in Oak Flats, NSW.
Common questions
- Will the RC-1102 fit a self-levelling County 110-series wagon?
- No — it is listed for the V8-petrol and 2.5L-diesel builds without self-levelling. Confirm your exact variant and rear setup with the workshop before ordering.
- Does it lift the vehicle?
- Our record lists no height or rate, so we don't claim a lift. We confirm the intended ride height and rate at the workshop rather than guess.
- How much is it?
- Pricing is confirmed at the time of order — ask us and we'll quote the current figure and availability.
Fitment support across the Illawarra
Fitment checks near you across 18 Illawarra suburbs, from Oak Flats and Shellharbour to Wollongong and Kiama.Show nearby fitment areasCollapse section
Oak Flats Muffler Men can check this part against supplier specs, part number, image, RRP and vehicle details for customers around Oak Flats, Shellharbour, Wollongong, Dapto, Albion Park, Kiama and the northern suburbs.
Check fitment near Oak FlatsCheck fitment near Albion Park RailCheck fitment near ShellharbourCheck fitment near WollongongCheck fitment near DaptoCheck fitment near WarillaCheck fitment near CorrimalCheck fitment near WoononaCheck fitment near BulliCheck fitment near ThirroulCheck fitment near KiamaCheck fitment near Albion ParkCheck fitment near Lake IllawarraCheck fitment near Mount WarrigalCheck fitment near Barrack HeightsCheck fitment near Barrack PointCheck fitment near BlackbuttCheck fitment near Flinders
Related parts in this category
More suspension and 4x4 parts the workshop supplies and fits. Send the vehicle and the part you are weighing up for a fitted quote.
G6302 1695 Shock Absorber Nitro for Isuzu D MAX D MAX 2012 2020 UTE
RAW 4x4RRP pendingG6302 1695 Shock Absorber Nitro.
View part
PR302S 1695 Shock Absorber Nitro for Isuzu D MAX D MAX 2012 2020 UTE
RAW 4x4RRP pendingRAW 4x4 PR302S 1695 Shock Absorber Nitro.
View part
RCA407 Upper Control ARM for Isuzu D MAX D MAX 8/2020 on UTE / Dual CAB
RAW 4x4RRP pendingRCA407 Upper Control ARM.
View part
G61406 2289 Shock Absorber for Isuzu D MAX D MAX 8/2020 on UTE / Dual
RAW 4x4RRP pendingG61406 2289 Shock Absorber. Quality guaranteed.
View part
G61406 1696 Shock Absorber for Isuzu D MAX D MAX 8/2020 on UTE / Dual
RAW 4x4RRP pendingG61406 1696 Shock Absorber.
View partBook the right exhaust job without guessing.
Send the vehicle make, model, year, engine, current issue, desired sound or performance goal, and clear photos of the existing exhaust where available.