TB1547 Torsion BAR for Isuzu D MAX / Invader Tfs, R7, R9 UTE / Dual CAB
RAW 4x4RRP pendingTB1547 Torsion BAR.
View partRC-1103
RC 1103 Coil Spring for Landrover County 110 Series Wagon
RC 1103 Coil Spring for Landrover County 110 Series Wagon (v8 Petrol & 2.5l Diesel)models without Self… (RC-1103) at fits selected vehicle applications. Fast shipping, warranty included.
BrandRAW 4x4
Category: Suspension and 4x4 parts
RRP pending
Confirmed on orderAfterpay, Zip Pay & Zip Money available
Part specs
- heights
- ['40mm']
- positions
- ['Rear']
- shock_types
- []
- vehicle_count
- 5
The RAW 4x4 RC-1103 is a replacement coil spring listed to fit the County 110 Series wagon in V8 petrol and 2.5L diesel form, built without self-levelling rear suspension. It's a single ride-height coil for a live-axle wagon, not a complete kit.
What a coil spring does on a live-axle 110
A coil spring carries the vehicle's weight at one corner and sets ride height; the shock absorber then damps the motion the spring allows. On a live-axle wagon like the 110 the coils locate the body over the axle and soak up the first hit before the dampers settle it. The RC-1103 is a direct coil replacement — sagging factory springs lose height and let the suspension run short on travel, and a fresh coil restores the designed stance. No rate, free length or colour code is published in our record, so we don't put figures against it.
Why the 'without self-levelling' note matters
This RC-1103 is specified for 110 wagons that left the factory without the self-levelling rear setup, so the spring geometry suits that configuration rather than the levelled variant. If your 110 runs self-levelling gear at the rear, this isn't the part — that's exactly the build detail we confirm before ordering, because getting it wrong means the wrong spring for the corner.
Will it suit your 110 Series wagon?
It's listed to fit the County 110 Series wagon in V8 petrol and 2.5L diesel forms, without self-levelling. This generation ran several axle and spring combinations across its life, so confirm your exact build with the workshop before we order it in — we'd rather check the chassis than guess, and feed data can be imperfect.
What fitting involves at Oak Flats
Oak Flats Muffler Men supplies and fits suspension components like the RC-1103 in-house across the Illawarra. Coil swaps on a live-axle wagon mean supporting the axle, releasing the spring under controlled tension and checking the shocks, bump stops and bushes while the corner is apart. Send us your wagon's details and we'll confirm the fit and book the bay. Pricing is pending from RAW 4x4, so we quote the special-order cost on enquiry.
Stocked and fitted by Oak Flats Muffler Men, the Illawarra exhaust and 4x4 specialist in Oak Flats, NSW.
Common questions
- Is the RC-1103 a complete spring kit?
- No — our record lists it as a single ride-height coil spring for the 110 Series wagon, not a full kit with shocks or fitting hardware.
- Will it fit a 110 with self-levelling suspension?
- It's specified for 110 wagons built without self-levelling. If yours has the self-levelling rear setup, confirm with the workshop first, as this spring suits the non-levelled configuration.
- Is a price shown?
- Pricing is pending from RAW 4x4 in our record, so Oak Flats Muffler Men quotes the current special-order cost when you enquire.
Fitment support across the Illawarra
Fitment checks near you across 18 Illawarra suburbs, from Oak Flats and Shellharbour to Wollongong and Kiama.Show nearby fitment areasCollapse section
Oak Flats Muffler Men can check this part against supplier specs, part number, image, RRP and vehicle details for customers around Oak Flats, Shellharbour, Wollongong, Dapto, Albion Park, Kiama and the northern suburbs.
Check fitment near Oak FlatsCheck fitment near Albion Park RailCheck fitment near ShellharbourCheck fitment near WollongongCheck fitment near DaptoCheck fitment near WarillaCheck fitment near CorrimalCheck fitment near WoononaCheck fitment near BulliCheck fitment near ThirroulCheck fitment near KiamaCheck fitment near Albion ParkCheck fitment near Lake IllawarraCheck fitment near Mount WarrigalCheck fitment near Barrack HeightsCheck fitment near Barrack PointCheck fitment near BlackbuttCheck fitment near Flinders
Related parts in this category
More suspension and 4x4 parts the workshop supplies and fits. Send the vehicle and the part you are weighing up for a fitted quote.
G6302 1695 Shock Absorber Nitro for Isuzu D MAX D MAX 2012 2020 UTE
RAW 4x4RRP pendingG6302 1695 Shock Absorber Nitro.
View part
PR302S 1695 Shock Absorber Nitro for Isuzu D MAX D MAX 2012 2020 UTE
RAW 4x4RRP pendingRAW 4x4 PR302S 1695 Shock Absorber Nitro.
View part
RCA407 Upper Control ARM for Isuzu D MAX D MAX 8/2020 on UTE / Dual CAB
RAW 4x4RRP pendingRCA407 Upper Control ARM.
View part
G61406 2289 Shock Absorber for Isuzu D MAX D MAX 8/2020 on UTE / Dual
RAW 4x4RRP pendingG61406 2289 Shock Absorber. Quality guaranteed.
View part
G61406 1696 Shock Absorber for Isuzu D MAX D MAX 8/2020 on UTE / Dual
RAW 4x4RRP pendingG61406 1696 Shock Absorber.
View partBook the right exhaust job without guessing.
Send the vehicle make, model, year, engine, current issue, desired sound or performance goal, and clear photos of the existing exhaust where available.