RC-1407

RC 1407 Coil Spring for Toyota Landcruiser 80 Series Fj80, Hdj80, HZJ80 Wagon

RC 1407 Coil Spring. Quality guaranteed.

BrandRAW 4x4

Category: Suspension and 4x4 parts

RRP pending
Confirmed on order
Afterpay, Zip Pay & Zip Money available
Afterpay acceptedZip accepted — Zip Pay and Zip Money
RC 1407 Coil Spring for Toyota Landcruiser 80 Series Fj80, Hdj80, HZJ80 Wagon (all Variants) product image

Part specs

heights
['50mm']
positions
['Front']
shock_types
[]
vehicle_count
4

Ride height and spring rate live with the coil: the RAW 4x4 RC-1407 is a replacement coil spring listed to fit the Toyota Landcruiser 80 Series (FJ80/HDJ80/HZJ80) wagon. It is the load-bearing spring for a coil-sprung Cruiser, sold and fitted as a direct replacement.

What does the coil spring do?

On a coil-sprung 80 Series LandCruiser the coil carries the vehicle’s weight and sets the static ride height. Swapping it is how you restore a sagged front or rear, or change the standing height and load behaviour. We do not publish a rate or lift figure for the RC-1407 that the supplier has not stated — those are confirmed at the workshop against your intended load.

Which axle does the RC-1407 fit?

Coils differ front to rear and by rate, so we confirm whether you need the front or rear spring for your Toyota Landcruiser 80 Series wagon (FJ80/HDJ80/HZJ80) before ordering. The listing covers all variants, so the exact build matters.

How does it compare to a tired factory coil?

A worn factory coil sits lower and loses composure under load. A fresh RC-1407 restores the designed height and rebound. If you are also replacing shocks, matching the damper to the new spring is worth doing in the same visit rather than mixing old and new.

What does fitting in the Illawarra involve?

Oak Flats Muffler Men fits coil springs in-house at Oak Flats. It is a spring-compressor job done on the hoist; we check the seats, isolators and shocks while we are in there. Send your chassis code and we will confirm the right RC-1407 and book you in.

Stocked and fitted by Oak Flats Muffler Men, the Illawarra exhaust and 4x4 specialist in Oak Flats, NSW.

Common questions

Will the RC-1407 raise my LandCruiser?
A coil sets ride height, but we do not quote a lift figure the supplier has not published. Tell us your load and goal and we will confirm what this spring does for your build.
Is this a front or rear coil?
Coils are axle- and rate-specific. Confirm your chassis code and the axle with us and we will match the correct RC-1407.
Can you fit it for me?
Yes — Oak Flats Muffler Men supplies and fits RAW 4x4 coil springs across the Illawarra, checking the seats and isolators during the swap.

Fitment support across the Illawarra

Fitment checks near you across 18 Illawarra suburbs, from Oak Flats and Shellharbour to Wollongong and Kiama.
Show nearby fitment areasCollapse section

Book the right exhaust job without guessing.

Send the vehicle make, model, year, engine, current issue, desired sound or performance goal, and clear photos of the existing exhaust where available.