RC-1415

RC 1415 Coil Spring for Toyota Landcruiser 71 Series Fzj71, HZJ71 Wagon (all Variants)

RC 1415 Coil Spring. Quality guaranteed.

BrandRAW 4x4

Category: Suspension and 4x4 parts

RRP pending
Confirmed on order
Afterpay, Zip Pay & Zip Money available
Afterpay acceptedZip accepted — Zip Pay and Zip Money
RC 1415 Coil Spring for Toyota Landcruiser 71 Series Fzj71, HZJ71 Wagon (all Variants) product image

Part specs

heights
['45-50mm', '50mm']
positions
['Front']
shock_types
[]
vehicle_count
7

Fitted to the coil-sprung 71 Series wagon (FZJ71/HZJ71), the RAW 4x4 RC-1415 is the ride-height coil for one corner of the truck. It carries the load and sets the standing height; the shock alongside it only controls how that spring moves.

How a coil swap changes a 70-series Cruiser

Because the 71 Series wagon runs coils, ride height and load behaviour are altered by changing the spring rather than re-arching a leaf. A coil that's gone soft drops the corner and shortens travel; the RC-1415 resets it. RAW 4x4 hasn't published a rate or height in our record, so we won't state one — we confirm the application for your build instead.

Will the RC-1415 match your FZJ71 or HZJ71?

It's catalogued for the 71 Series wagon (FZJ71/HZJ71), all variants. The listing covers the range, so confirming your exact chassis code is the surest way to land the right spring first time. If you're not certain which code your wagon carries, it's stamped on the build plate and we can read it for you.

Matching the damper

A new coil relies on a damper in good order to control it. If your shocks are tired, it's worth doing them alongside the RC-1415 in the same visit so the corner is consistent rather than a fresh spring on a worn shock. We'll advise what suits when you book.

Fitting at Oak Flats, Illawarra

Oak Flats Muffler Men supplies and fits RAW 4x4 coil springs in-house across the Illawarra. Fitting means safely unloading the corner, swapping the spring and re-checking ride height and clearances. We confirm the RC-1415 against your wagon before any work starts.

Stocked and fitted by Oak Flats Muffler Men, the Illawarra exhaust and 4x4 specialist in Oak Flats, NSW.

Common questions

Does the RC-1415 fit my 71 Series wagon?
It's listed for the FZJ71/HZJ71 wagon, all variants. Confirm your chassis code with the workshop before ordering, as feed data can be imperfect.
What lift does it give?
RAW 4x4 hasn't published a lift figure in our record, so we don't quote one. Tell us your goal and we'll confirm what the spring suits.
Should I replace shocks too?
It's worth matching the damper to a new spring; we'll advise on what suits your setup when you book in.

Fitment support across the Illawarra

Fitment checks near you across 18 Illawarra suburbs, from Oak Flats and Shellharbour to Wollongong and Kiama.
Show nearby fitment areasCollapse section

Book the right exhaust job without guessing.

Send the vehicle make, model, year, engine, current issue, desired sound or performance goal, and clear photos of the existing exhaust where available.