RC-1507

RC 1507 Coil Spring for Toyota 4 Runner / Surf Kzn185, RZN185 Wagon

RC 1507 Coil Spring.

BrandRAW 4x4

Category: Suspension and 4x4 parts

RRP pending
Confirmed on order
Afterpay, Zip Pay & Zip Money available
Afterpay acceptedZip accepted — Zip Pay and Zip Money
RC 1507 Coil Spring for Toyota 4 Runner / Surf Kzn185, RZN185 Wagon product image

Part specs

heights
['40mm']
positions
['Rear']
shock_types
[]
vehicle_count
3

Catalogued against the KZN185 and RZN185 chassis codes, the RAW 4x4 RC-1507 is a replacement coil spring for the Toyota 4Runner / Surf wagon. It's the load-bearing spring at one corner — the part that holds the wagon up and sets how it sits, supplied on its own.

Which 4Runner / Surf does the RC-1507 cover?

RAW 4x4 lists this coil specifically for the KZN185 and RZN185 wagon. Matching the chassis code is what gets the right spring first time, because these 4Runner / Surf wagons were sold in a few drivetrain combinations and the coil application follows the build. The code is on the build plate if you're not sure which you have.

What the coil does on a coil-sprung corner

A coil spring supports the vehicle's weight, sets the static ride height and works through its travel as the wheel moves over the road, with the shock controlling that motion. The RC-1507 is the spring by itself, so it pairs with the existing damper or a matched new one. We don't have a published rate or height for it, and we won't invent one.

Restoring height versus chasing a figure

The supplier hasn't published a lift or rate for the RC-1507 in our record, so we describe it honestly as a direct replacement coil for the listed Toyota rather than quoting a number. If you're after a particular height or a load-rated option, tell us the goal and we'll check what's available for the KZN185/RZN185.

Fitting and setting it up at our Illawarra workshop

Oak Flats Muffler Men sells and fits RAW 4x4 suspension hardware in-house across the Illawarra. Fitting the coil means safely unloading the corner, swapping the spring and re-checking ride height and clearances. We confirm the part against your wagon before any work starts.

Stocked and fitted by Oak Flats Muffler Men, the Illawarra exhaust and 4x4 specialist in Oak Flats, NSW.

Common questions

Does the RC-1507 fit my KZN185 or RZN185?
It's listed for the Toyota 4Runner / Surf wagon (KZN185, RZN185). Confirm your exact chassis code and build with the workshop before ordering.
Is it one spring or a pair?
It's catalogued as a coil spring; whether you need a matching pair is confirmed with the workshop for your application.
What lift does it give?
RAW 4x4 hasn't published a lift figure in our record, so we don't quote one. Tell us your goal and we'll confirm what the spring suits.

Fitment support across the Illawarra

Fitment checks near you across 18 Illawarra suburbs, from Oak Flats and Shellharbour to Wollongong and Kiama.
Show nearby fitment areasCollapse section

Book the right exhaust job without guessing.

Send the vehicle make, model, year, engine, current issue, desired sound or performance goal, and clear photos of the existing exhaust where available.