RC-1515

RC 1515 Coil Spring for Toyota Landcruiser 80 Series Fj80, Hdj80, HZJ80 100MM (4”) Lift

RC 1515 Coil Spring. Quality guaranteed.

BrandRAW 4x4

Category: Suspension and 4x4 parts

RRP pending
Confirmed on order
Afterpay, Zip Pay & Zip Money available
Afterpay acceptedZip accepted — Zip Pay and Zip Money
RC 1515 Coil Spring for Toyota Landcruiser 80 Series Fj80, Hdj80, HZJ80 100MM (4”) Lift Wagon (all Variants) product image

Part specs

heights
['100mm']
positions
['Rear']
shock_types
[]
vehicle_count
3

RAW 4x4's RC-1515 is a coil spring listed to fit the Toyota Landcruiser 80 Series wagon (FJ80, HDJ80, HZJ80) set up for a 100mm (4in) lift. It's the raised-height coil for the 80, distinct from the standard-height spring for the same chassis.

How a lift coil works on the 80

A lift spring sits taller than the factory coil so the body rises, clearing larger tyres and adding underbody clearance. The RC-1515 is RAW 4x4's coil listed for a 100mm (4in) lift on the 80 Series. We don't quote rate, free length or load rating, as the supplier hasn't published them against this listing; the right coil for your load and lift is confirmed when we quote.

Which build does it suit?

It's listed to fit the FJ80, HDJ80 and HZJ80 wagon configured with a 100mm (4in) lift, all variants. The lift height is the distinguishing detail versus the stock-height coil. Ride quality on a lift depends on matched dampers and the weight carried, so confirm your exact setup with the workshop before ordering.

Pricing

There's no recommended retail price against the RC-1515 in our records. We'll quote it for you, pricing the springs as a pair since that's how they fit.

Building the lift at Oak Flats

Oak Flats Muffler Men assembles lifted 80 Series suspension in-house across the Illawarra, matching lift coils to the right shocks and checking clearances through travel. It's listed to fit the lifted 80 Series wagon; send your build and we'll confirm the spring and schedule it.

Stocked and fitted by Oak Flats Muffler Men, the Illawarra exhaust and 4x4 specialist in Oak Flats, NSW.

Common questions

Is the RC-1515 a 4in lift spring?
It's listed for the 80 Series wagon set up with a 100mm (4in) lift. Stock height takes a different coil.
Do I need lift shocks too?
Yes — a lift needs dampers sized for the taller height. We'll match a set at quote time.
How much does it cost?
No RRP is published in our records. Contact the workshop for a quote.

Fitment support across the Illawarra

Fitment checks near you across 18 Illawarra suburbs, from Oak Flats and Shellharbour to Wollongong and Kiama.
Show nearby fitment areasCollapse section

Book the right exhaust job without guessing.

Send the vehicle make, model, year, engine, current issue, desired sound or performance goal, and clear photos of the existing exhaust where available.