RC-1698

RC 1698 Coil Spring for Toyota FJ Cruiser Gsj15, GSJ15R Wagon 4.0l V6

RC 1698 Coil Spring.0l V6 (RC-1698) at fits selected vehicle applications. Fast shipping, warranty included.

BrandRAW 4x4

Category: Suspension and 4x4 parts

RRP pending
Confirmed on order
Afterpay, Zip Pay & Zip Money available
Afterpay acceptedZip accepted — Zip Pay and Zip Money
RC 1698 Coil Spring for Toyota FJ Cruiser Gsj15, GSJ15R Wagon 4.0l V6 product image

Part specs

heights
['40mm']
positions
['Rear']
shock_types
[]
vehicle_count
4

A replacement coil spring, the RAW 4x4 RC-1698, is listed to fit the Toyota FJ Cruiser GSJ15 GSJ15R Wagon 4.0L V6. The coil is the load-bearing spring in a coil-sprung corner, so it's what you change to alter ride height or restore sag.

What job does the coil do here?

A coil spring supports the vehicle's weight and stores the energy of bumps and body movement. Swapping coils is how ride height and load behaviour are changed on a coil-sprung 4x4 — the RC-1698 is the spring itself, fitted with matched dampers to suit. The supplier hasn't published a specific lift height or rate for this listing in the record we hold, so we don't quote one; we confirm the spring's intended application directly.

Will it suit my Toyota FJ Cruiser?

It is listed to fit the Toyota FJ Cruiser GSJ15 GSJ15R Wagon 4.0L V6. Coil selection depends on the corner (front or rear), the load you carry and the rest of the setup, so the listing is a guide rather than a guarantee. Send us your vehicle details and what you're trying to achieve and we'll confirm the right spring.

Is a coil change a road-legality issue?

Coil springs are suspension parts, not emissions hardware, so exhaust road-legality rules don't apply. Ride-height changes can fall under engineering and certification requirements for modified vehicles in NSW, which we're happy to walk you through for your specific build.

How do we fit it at our Illawarra workshop?

Oak Flats Muffler Men fits coil springs in-house in the Illawarra, usually as part of a wider suspension job rather than in isolation. Pricing on this line is confirmed on request — it can be a special-order item, so check current cost and availability with the workshop.

Stocked and fitted by Oak Flats Muffler Men, the Illawarra exhaust and 4x4 specialist in Oak Flats, NSW.

Common questions

Will the RC-1698 suit my Toyota FJ Cruiser?
It's listed to fit the Toyota FJ Cruiser GSJ15 GSJ15R Wagon 4.0L V6. Spring choice depends on the corner and load, so confirm your exact requirements with the workshop first.
What lift height does this coil give?
The supplier hasn't published a lift figure for this listing in our record, so we don't quote one — we confirm the spring's intended application before fitting.
Should I replace shocks at the same time?
It's worth matching dampers to new springs; we'll advise on what suits your setup when you book in.

Fitment support across the Illawarra

Fitment checks near you across 18 Illawarra suburbs, from Oak Flats and Shellharbour to Wollongong and Kiama.
Show nearby fitment areasCollapse section

Book the right exhaust job without guessing.

Send the vehicle make, model, year, engine, current issue, desired sound or performance goal, and clear photos of the existing exhaust where available.