RC-1699

RC 1699 Coil Spring for Toyota FJ Cruiser Gsj15, GSJ15R Wagon 4.0l V6

RC 1699 Coil Spring.0l V6 (RC-1699) at fits selected vehicle applications. Fast shipping, warranty included.

BrandRAW 4x4

Category: Suspension and 4x4 parts

RRP pending
Confirmed on order
Afterpay, Zip Pay & Zip Money available
Afterpay acceptedZip accepted — Zip Pay and Zip Money
RC 1699 Coil Spring for Toyota FJ Cruiser Gsj15, GSJ15R Wagon 4.0l V6 product image

Part specs

heights
['40mm', '50mm']
positions
['Rear']
shock_types
[]
vehicle_count
4

For the 4.0L V6 FJ Cruiser (GSJ15 / GSJ15R wagon), the RAW 4x4 RC-1699 is the coil that sets how the wagon stands. Owners reach for it when an FJ has settled with bar work, drawers and touring weight and needs its height and travel reset at the corner.

Why FJ Cruiser owners change a coil

The FJ Cruiser is a heavy, accessory-friendly wagon, and the coil carries all of that weight at its corner while setting the static height. As loads go up or springs age, the corner sags and travel shortens. The RC-1699 is the replacement spring for that job. RAW 4x4 hasn't published a rate or height in our record, so we confirm the application rather than quoting a figure.

Is the RC-1699 right for your GSJ15?

It's listed for the Toyota FJ Cruiser GSJ15 GSJ15R wagon, 4.0L V6. Coil choice depends on the corner, the load you carry and the rest of the set-up, so the listing is a starting point. Send your vehicle details and what you're chasing and we'll confirm the right spring.

Does a coil change affect compliance?

Coil springs are suspension parts, not emissions hardware, so exhaust road-legality rules don't apply. Ride-height changes can fall under engineering and certification requirements for modified vehicles in NSW, which we'll walk you through for your specific build.

Fitting and sourcing at our Illawarra workshop

Oak Flats Muffler Men fits coil springs in-house in the Illawarra, usually as part of a wider suspension job. Pricing on this line is confirmed on request — it can be a special-order item, so check current cost and availability with the workshop.

Stocked and fitted by Oak Flats Muffler Men, the Illawarra exhaust and 4x4 specialist in Oak Flats, NSW.

Common questions

Will the RC-1699 suit my FJ Cruiser?
It's listed for the Toyota FJ Cruiser GSJ15 GSJ15R wagon, 4.0L V6. Spring choice depends on the corner and load, so confirm your requirements with the workshop first.
What lift height does it give?
RAW 4x4 hasn't published a lift figure in our record, so we don't quote one — we confirm the spring's intended application before fitting.
Should I do shocks at the same time?
It's worth matching dampers to new springs; we'll advise on what suits your setup when you book in.

Fitment support across the Illawarra

Fitment checks near you across 18 Illawarra suburbs, from Oak Flats and Shellharbour to Wollongong and Kiama.
Show nearby fitment areasCollapse section

Book the right exhaust job without guessing.

Send the vehicle make, model, year, engine, current issue, desired sound or performance goal, and clear photos of the existing exhaust where available.