
NM1416 Shock Absorber for Toyota Hilux Wide Body Rogue Wide Body Rogue
RAW 4x4RRP$329.69RAW 4x4 NM1416 Shock Absorber.
View part
RAW 4x4 RC 2293 Coil Spring.4l Petrol & 2.4l T/d).
Category: Suspension and 4x4 parts


The RAW 4x4 RC-2293 is a coil spring for the compact LandCruiser II wagon (RJ77, KZJ78, LJ78, LJ79) in 2.4L petrol and 2.4L turbo-diesel guise. Supplied as the spring alone, it's the component that sets ride height and carries the corner on this coil-sprung Cruiser.
This is the coil spring on its own, not a kit or a damper. On the LandCruiser II it bears the weight at its corner and sets the static height while the shock controls the motion. RAW 4x4 hasn't published a spring rate, free length or lift figure in our record, so rather than guess we confirm the spring's intended application directly.
It's listed for the RJ77, KZJ78, LJ78 and LJ79 wagon in 2.4L petrol and 2.4L turbo-diesel form. Those codes cover several variants of the same wagon, so the surest path is to confirm your exact chassis code against the RC-2293 — it's on the build plate if you're unsure which you have.
A fresh coil relies on a shock in good order to control it. If your dampers are tired it's worth doing them alongside the RC-2293 so the corner is consistent rather than a new spring on a worn shock. We'll advise what suits when you book.
Oak Flats Muffler Men supplies and fits RAW 4x4 coil springs in-house across the Illawarra. We unload the corner safely, fit the new spring and re-check ride height and clearances, with a look over shocks and bump stops while we're there. We verify the part against your wagon first.
Stocked and fitted by Oak Flats Muffler Men, the Illawarra exhaust and 4x4 specialist in Oak Flats, NSW.
Oak Flats Muffler Men can check this part against supplier specs, part number, image, RRP and vehicle details for customers around Oak Flats, Shellharbour, Wollongong, Dapto, Albion Park, Kiama and the northern suburbs.
Send the vehicle make, model, year, engine, current issue, desired sound or performance goal, and clear photos of the existing exhaust where available.