RC-2450

RC 2450 Coil Spring for Toyota Fortuner Kun51, TGN51 Wagon

RC 2450 Coil Spring.

BrandRAW 4x4

Category: Suspension and 4x4 parts

RRP pending
Confirmed on order
Afterpay, Zip Pay & Zip Money available
Afterpay acceptedZip accepted — Zip Pay and Zip Money
RC 2450 Coil Spring for Toyota Fortuner Kun51, TGN51 Wagon product image

Part specs

heights
['40mm', '50mm']
positions
['Rear']
shock_types
[]
vehicle_count
3

The RAW 4x4 RC-2450 is a coil spring listed to fit the Toyota Fortuner KUN51/TGN51 wagon. As the load-bearing element of the suspension, it's the part that determines how the wagon sits and how it handles weight.

Coil spring vs shock — what's the RC-2450's job?

Where a shock absorber damps movement, the RC-2450 coil spring carries the vehicle and sets its ride height. It's one of RAW 4x4's springs for the KUN51/TGN51 Fortuner wagon. The right coil is how you correct a sagging stance or tune ride height to the load you carry — though this listing doesn't publish a rate or height figure, so we confirm the exact spec with RAW rather than infer it.

Matching the RC-2450 to your wagon

RAW lists its coils by position and application; the RC-2450 is a specific spring in the Fortuner set. We confirm whether you need a front or rear coil and whether it suits how the vehicle is loaded before ordering, so the finished stance is correct.

Is it right for my Toyota Fortuner?

It's listed to fit the Toyota Fortuner KUN51/TGN51 wagon. Because spring choice hinges on load and any earlier modifications, send your build and we'll verify the RC-2450 is the coil you need.

Supply and fitting in the Illawarra

Oak Flats Muffler Men fits RAW 4x4 springs in-house and pairs coils across an axle so the wagon sits level side to side. This spring is currently price-pending from RAW 4x4, so we handle it as a special-order quote.

Stocked and fitted by Oak Flats Muffler Men, the Illawarra exhaust and 4x4 specialist in Oak Flats, NSW.

Common questions

Will the RC-2450 fit my Fortuner KUN51/TGN51?
It's listed to fit that wagon. We confirm the position and load match for your build before ordering.
How much lift does it give?
No height or rate figure is published in this listing, so we confirm the spec with RAW rather than estimate it.
Should I fit new springs both sides?
Yes — matched coils across an axle keep the vehicle level.

Fitment support across the Illawarra

Fitment checks near you across 18 Illawarra suburbs, from Oak Flats and Shellharbour to Wollongong and Kiama.
Show nearby fitment areasCollapse section

Book the right exhaust job without guessing.

Send the vehicle make, model, year, engine, current issue, desired sound or performance goal, and clear photos of the existing exhaust where available.