RC-2502

RC 2502 Coil Spring for Dodge RAM 1500 Dsute

RAW 4x4 RC 2502 Coil Spring.

BrandRAW 4x4

Category: Suspension and 4x4 parts

RRP $419.08 AUD
Confirmed on order
Afterpay, Zip Pay & Zip Money available
Afterpay acceptedZip accepted — Zip Pay and Zip Money
RC 2502 Coil Spring for Dodge RAM 1500 Dsute product image

Part specs

heights
['50mm']
positions
['Front']
shock_types
[]
vehicle_count
2

Listed for the same DS-generation truck, the RAW 4x4 RC-2502 is a coil spring for the Dodge RAM 1500 DS ute. It's the load-bearing element of the suspension — the part that holds the truck up and sets how it sits.

Where the coil spring fits in

On the DS RAM 1500, the coil spring carries the vehicle's weight and governs ride height and how far the suspension travels under load. The RC-2502 is the RAW 4x4 spring listed for this ute. No rate or height figures are published for it, so we won't state any — we'll just confirm it as the correct coil for the model.

Confirming fitment

It's listed to fit the Dodge RAM 1500 DS ute. Because the 1500 nameplate covers several generations, the DS code is the key to getting the right spring, and front versus rear position matters too. Send your exact build to the workshop and we'll check it before ordering.

Why pair springs with dampers

A coil spring and its shock absorber are a matched pair — renewing one and leaving the other tired gives an uneven result. If you're freshening the DS RAM's suspension, ask us about the matching RAW shock at the same time so the setup works as one.

Fitting at Oak Flats Muffler Men

We fit suspension parts in-house across the Illawarra alongside our exhaust work. We verify the RC-2502 against your RAM, fit it with the spring properly controlled and check the mounts and bushes. Bring the ute in and we'll handle it.

Stocked and fitted by Oak Flats Muffler Men, the Illawarra exhaust and 4x4 specialist in Oak Flats, NSW.

Common questions

Which RAM 1500 does the RC-2502 suit?
It's listed for the Dodge RAM 1500 DS ute. Confirm your exact generation and axle position with the workshop first.
Are rate or height figures available?
None are published for this spring, so we won't quote them. It's the RAW 4x4 coil listed for the DS RAM 1500.

Fitment support across the Illawarra

Fitment checks near you across 18 Illawarra suburbs, from Oak Flats and Shellharbour to Wollongong and Kiama.
Show nearby fitment areasCollapse section

Book the right exhaust job without guessing.

Send the vehicle make, model, year, engine, current issue, desired sound or performance goal, and clear photos of the existing exhaust where available.