RC-2546

RC 2546 Coil Spring for Toyota Landcruiser 300 Series FJA300 Wagon (3.3l V6 Diesel)

RC 2546 Coil Spring.3l V6 Diesel) for selected vehicle applications.

BrandRAW 4x4

Category: Suspension and 4x4 parts

RRP pending
Confirmed on order
Afterpay, Zip Pay & Zip Money available
Afterpay acceptedZip accepted — Zip Pay and Zip Money
RC 2546 Coil Spring for Toyota Landcruiser 300 Series FJA300 Wagon (3.3l V6 Diesel) product image

Part specs

heights
['35mm']
positions
['Rear']
shock_types
[]
vehicle_count
1

RAW 4x4's RC-2546 is a coil spring catalogued for the Toyota LandCruiser 300 Series wagon (FJA300, 3.3L V6 diesel). On a wagon this heavy, the coil is the part that decides where the body sits and how much weight a corner can shoulder.

How a coil earns its keep on the 300

The 300 Series is a substantial wagon, and its coils hold a real burden: they support the kerb weight at each corner and fix the resting height the dampers then work around. That burden grows the moment touring gear, bar work or extra fuel joins the picture. Fitting a fresh coil such as the RC-2546 is how you bring the stance back to where it belongs, or set it for the way you load the truck.

Choosing a spring for a touring FJA300

A 300 that lives loaded asks more of its springs than one that runs empty. The coil is what keeps the chosen ride height honest under that weight. RAW 4x4 lists the RC-2546 against the FJA300 platform. Our record states no spring rate and no lift figure, so we won't put numbers to it — the workshop matches the right spring to how you actually load the wagon.

Confirming it against your 300 Series

The listing covers the Toyota LandCruiser 300 Series wagon, FJA300, with the 3.3L V6 diesel. There's no model-year range or stated height in the published facts, so neither is quoted here. Because spring choice on these wagons turns on payload and accessories, send your build through and we'll confirm the RC-2546 suits before placing the order.

Fitting the RC-2546 in the Illawarra

Oak Flats Muffler Men changes coil springs in our Oak Flats bay, serving the Illawarra. We fit the spring, pair it against its shock, and verify ride height and clearance on the hoist before the truck comes down. We'll lock in the exact 300 Series variant and your typical load with you first, so the spring on order matches the vehicle in the workshop.

Stocked and fitted by Oak Flats Muffler Men, the Illawarra exhaust and 4x4 specialist in Oak Flats, NSW.

Common questions

Is the RC-2546 listed for the LandCruiser 300?
Yes — it's listed to fit the Toyota LandCruiser 300 Series wagon (FJA300) with the 3.3L V6 diesel. Confirm your exact build with the workshop before ordering.
Should the shocks be done at the same time?
The coil and its shock work as a pair. If the dampers are worn or you're resetting ride height, it's worth doing both together so the suspension stays balanced.

Fitment support across the Illawarra

Fitment checks near you across 18 Illawarra suburbs, from Oak Flats and Shellharbour to Wollongong and Kiama.
Show nearby fitment areasCollapse section

Book the right exhaust job without guessing.

Send the vehicle make, model, year, engine, current issue, desired sound or performance goal, and clear photos of the existing exhaust where available.