RC-2547

RC 2547 Coil Spring for Toyota Landcruiser 300 Series FJA300 Wagon (3.3l V6 Diesel)

RC 2547 Coil Spring.3l V6 Diesel) for selected vehicle applications.

BrandRAW 4x4

Category: Suspension and 4x4 parts

RRP pending
Confirmed on order
Afterpay, Zip Pay & Zip Money available
Afterpay acceptedZip accepted — Zip Pay and Zip Money
RC 2547 Coil Spring for Toyota Landcruiser 300 Series FJA300 Wagon (3.3l V6 Diesel) product image

Part specs

heights
['40mm', '50mm']
positions
['Rear']
shock_types
[]
vehicle_count
2

Stance, height and corner load on a Toyota LandCruiser 300 Series all trace back to the coil, and the RAW 4x4 RC-2547 is the coil listed for the FJA300 wagon with the 3.3L V6 diesel.

What the coil decides on a 300 Series

Where the wagon sits, how level it stays and how much each corner can bear are all set by the coil before the dampers ever come into play. On a heavy diesel 300 the springs carry a great deal, and the right one keeps the truck sitting square under whatever has been added to it. RAW 4x4 lists the RC-2547 for the FJA300; with no rate or lift height in the record, those stay unstated and the workshop matches the spring to your build.

When a 300's coils have had enough

Coils settle over distance and constant weight. A 300 that's sagging at one end, or that feels like it runs out of travel under load, is usually flagging a spring that's past it. The RC-2547 is RAW 4x4's listed coil to reset that corner of the FJA300. No published figure accompanies it, so we won't guess one — we set the right spring against your loaded weight.

Does it fit your FJA300?

It's catalogued for the Toyota LandCruiser 300 Series wagon, FJA300, 3.3L V6 diesel. The facts carry no year range or stated lift, so we don't quote either. Spring choice here depends on day-to-day load and the gear bolted to the chassis, so send your setup over and we'll confirm the RC-2547 before ordering it in.

What our Oak Flats fit covers

Oak Flats Muffler Men fits coil springs in-house at our Oak Flats bay, serving the Illawarra. The spring goes in, gets set against its matched shock, and we re-check height and clearances on the hoist before the wagon leaves. We'll confirm your exact 300 variant and accessory load up front so the part ordered suits the truck that arrives.

Stocked and fitted by Oak Flats Muffler Men, the Illawarra exhaust and 4x4 specialist in Oak Flats, NSW.

Common questions

Will the RC-2547 fit a 300 Series LandCruiser?
It's listed to fit the Toyota LandCruiser 300 Series wagon (FJA300) with the 3.3L V6 diesel. Confirm your exact build with the workshop before ordering.
Do the shocks need replacing too?
Springs and shocks operate as a pair. Tired dampers or a ride-height change are good reasons to do both at once for a balanced result — we'll advise on the day.

Fitment support across the Illawarra

Fitment checks near you across 18 Illawarra suburbs, from Oak Flats and Shellharbour to Wollongong and Kiama.
Show nearby fitment areasCollapse section

Book the right exhaust job without guessing.

Send the vehicle make, model, year, engine, current issue, desired sound or performance goal, and clear photos of the existing exhaust where available.