Is the RC-2555 a 300 Series fit?

It's listed to fit the Toyota LandCruiser 300 Series wagon (FJA300) with the 3.3L V6 diesel. Confirm your exact build with the workshop before ordering.

Should I replace shocks alongside it?

The coil pairs with its shock absorber, so if the dampers are worn or you're changing height, doing both together keeps the suspension balanced. We'll advise during the fit.

RC-2555

RC 2555 Coil Spring for Toyota Landcruiser 300 Series FJA300 Wagon (3.3l V6 Diesel)

RAW 4x4 RC 2555 Coil Spring.3l V6 Diesel).

BrandRAW 4x4

Category: Suspension and 4x4 parts

RRP pending

Confirmed on order

Request fitted quote Call the workshop

Afterpay, Zip Pay & Zip Money available

RC 2555 Coil Spring for Toyota Landcruiser 300 Series FJA300 Wagon (3.3l V6 Diesel) product image

Part specs

heights: ['40mm', '50mm']
positions: ['Rear']
shock_types: []
vehicle_count: 2

Listed for the Toyota LandCruiser 300 Series wagon (FJA300, 3.3L V6 diesel), the RAW 4x4 RC-2555 is a direct replacement for the factory coil that carries the wagon and holds its ride height.

The coil's role on a heavy diesel wagon

On the 300 Series the coil is the corner's load-bearer: it holds the wagon's weight and pins the resting height, leaving the shock to manage motion. A truck this heavy leans on its springs hard, and that demand only rises once accessories and payload come aboard. Swapping in the RC-2555 restores or re-sets that corner of the FJA300 to where it should be.

Knowing when to replace a 300 Series coil

Springs lose arch over kilometres and under steady load. A wagon dropping at one end, or one that bottoms out too readily, is often telling you the coil is done. The RC-2555 is RAW 4x4's listed spring to bring that corner back on the FJA300. No rate or lift number appears in the published facts, so none is stated here — the workshop sets the correct spring to your vehicle.

Suiting it to your 300 Series

It's listed to fit the Toyota LandCruiser 300 Series wagon, FJA300, with the 3.3L V6 diesel. The record gives no model-year range and no stated height, so we quote neither. Because the right coil depends on how you load and accessorise the wagon, pass your build to us and we'll confirm the RC-2555 before ordering.

Fitting it at our Illawarra bay

Oak Flats Muffler Men changes coil springs in-house at our Oak Flats bay, serving the Illawarra. We install the spring, set it against its matched shock, and check ride height and clearances on the hoist before the truck is signed off. We'll confirm the exact 300 variant and your usual load with you first, so the part ordered matches the wagon in front of us.

Stocked and fitted by Oak Flats Muffler Men, the Illawarra exhaust and 4x4 specialist in Oak Flats, NSW.

Common questions

Is the RC-2555 a 300 Series fit?: It's listed to fit the Toyota LandCruiser 300 Series wagon (FJA300) with the 3.3L V6 diesel. Confirm your exact build with the workshop before ordering.
Should I replace shocks alongside it?: The coil pairs with its shock absorber, so if the dampers are worn or you're changing height, doing both together keeps the suspension balanced. We'll advise during the fit.

Fitment support across the Illawarra

Fitment checks near you across 18 Illawarra suburbs, from Oak Flats and Shellharbour to Wollongong and Kiama.Show nearby fitment areasCollapse section

Oak Flats Muffler Men can check this part against supplier specs, part number, image, RRP and vehicle details for customers around Oak Flats, Shellharbour, Wollongong, Dapto, Albion Park, Kiama and the northern suburbs.

Book the right exhaust job without guessing.

Send the vehicle make, model, year, engine, current issue, desired sound or performance goal, and clear photos of the existing exhaust where available.

Unit 2/8 Shaban St, Albion Park Rail NSW 2527 02 4256 3740 sales@mufflermen.com.au Send vehicle details

RC 2555 Coil Spring for Toyota Landcruiser 300 Series FJA300 Wagon (3.3l V6 Diesel)

Part specs

The coil's role on a heavy diesel wagon

Knowing when to replace a 300 Series coil

Suiting it to your 300 Series

Fitting it at our Illawarra bay

Common questions

Fitment support across the Illawarra

Related parts in this category

NM1416 Shock Absorber for Toyota Hilux Wide Body Rogue Wide Body Rogue

G6019M3Y Shock Absorber Nitro for Daihatsu Rocky / Fourtrack / Taft F70

G6324 1695 Shock Absorber Nitro for Foton Tunland Ute/dual CAB

G6324 2289 Shock Absorber Nitro for Foton Tunland Ute/dual CAB

G6324 1696 Shock Absorber Nitro for Foton Tunland Ute/dual CAB

NM324 2463 Shock Absorber Nitro for Foton Tunland Ute/dual CAB

Book the right exhaust job without guessing.