RC-2556

RC 2556 Coil Spring for Toyota Landcruiser 300 Series FJA300 Wagon (3.3l V6 Diesel)

RC 2556 Coil Spring.3l V6 Diesel) for selected vehicle applications.

BrandRAW 4x4

Category: Suspension and 4x4 parts

RRP pending
Confirmed on order
Afterpay, Zip Pay & Zip Money available
Afterpay acceptedZip accepted — Zip Pay and Zip Money
RC 2556 Coil Spring for Toyota Landcruiser 300 Series FJA300 Wagon (3.3l V6 Diesel) product image

Part specs

heights
['40mm', '50mm']
positions
['Rear']
shock_types
[]
vehicle_count
2

The RAW 4x4 RC-2556 is a coil spring catalogued to fit the Toyota LandCruiser 300 Series wagon (FJA300, 3.3L V6 diesel) — the component that sets the wagon's stance and holds it there under load.

What a coil controls on the FJA300

The coil holds the 300 Series up at its corner, fixing the resting height and bearing the weight that sits on it; the shock then governs how that spring moves. On a wagon this size the spring works hard, and harder still once a bar, fridge, water and recovery gear go on. The RC-2556 is the part you fit to restore that corner or to set the height you want from the FJA300.

Matching the spring to how you use the 300

A 300 set up for touring and a daily-driven one place different demands on their coils once payload and accessories enter the picture. The spring is what keeps the chosen stance honest under either. The RC-2556 is RAW 4x4's listed coil for the FJA300 platform. As with the rest of this range, our record carries no rate or height, so the workshop confirms the right option against your loaded weight rather than a published number.

Will it fit your LandCruiser 300?

It's listed to fit the Toyota LandCruiser 300 Series wagon, FJA300, with the 3.3L V6 diesel. There's no year range or stated lift in the facts, so neither is quoted. Spring choice on these wagons depends on day-to-day load and the gear hung off the chassis, so send your build through and we'll confirm the RC-2556 before it's ordered.

How Oak Flats Muffler Men fits it

We change coil springs in our Illawarra workshop at Oak Flats. The spring is fitted, set against its matched shock, and checked for ride height and clearance on the hoist before the wagon is handed back. We confirm the exact 300 variant and accessory load with you first so the spring on order matches the truck that turns up.

Stocked and fitted by Oak Flats Muffler Men, the Illawarra exhaust and 4x4 specialist in Oak Flats, NSW.

Common questions

Does the RC-2556 suit a LandCruiser 300?
It's listed to fit the Toyota LandCruiser 300 Series wagon (FJA300) with the 3.3L V6 diesel. Confirm your exact build with the workshop before ordering.
Do I pair it with new shocks?
Coils and shocks work as a set. If the dampers are tired or you're altering ride height, doing both at once keeps things balanced — we'll talk it through at fitting.

Fitment support across the Illawarra

Fitment checks near you across 18 Illawarra suburbs, from Oak Flats and Shellharbour to Wollongong and Kiama.
Show nearby fitment areasCollapse section

Book the right exhaust job without guessing.

Send the vehicle make, model, year, engine, current issue, desired sound or performance goal, and clear photos of the existing exhaust where available.