RCA350

RCA350 Upper Control ARM for Toyota Fortuner Kun51, TGN51 Wagon

RCA350 Upper Control ARM.

BrandRAW 4x4

Category: Suspension and 4x4 parts

RRP pending
Confirmed on order
Afterpay, Zip Pay & Zip Money available
Afterpay acceptedZip accepted — Zip Pay and Zip Money
RCA350 Upper Control ARM for Toyota Fortuner Kun51, TGN51 Wagon product image

Part specs

heights
[]
positions
['Front']
shock_types
[]
vehicle_count
7

The RAW 4x4 RCA350 is an upper control arm listed to fit the Toyota Fortuner Wagon (KUN51, TGN51). It's a front suspension arm that locates the top of the hub and sets wheel geometry - a chassis component, not anything exhaust-related.

What does an upper control arm do?

The upper control arm links the top of the front hub to the chassis and, with the lower arm, controls how the wheel moves through its travel. It's a key influence on front geometry - camber and caster - particularly once a vehicle is lifted and the standard arm's range is stretched. The RCA350 is that upper arm for the listed Fortuner.

Why fit an aftermarket upper arm?

Aftermarket upper control arms are commonly fitted to lifted 4x4s to recover front geometry the lift has altered and to restore correct alignment. The supplier hasn't published the arm's caster correction or bush specifics in this record, so we won't quote figures - it's listed as the correct upper arm for the Toyota above.

Will it suit my chassis?

It's listed to fit the Toyota Fortuner Wagon (KUN51, TGN51); confirm your exact build and variant with the workshop before ordering. The RCA350 is catalogued against the chassis codes shown, which determine the correct mounting and ball-joint fit. If you're unsure of your code, the team can confirm it from the vehicle.

How do we fit and align it?

Oak Flats Muffler Men sells and fits RAW 4x4 suspension hardware in-house across the Illawarra, so the RCA350 can be supplied on its own or fitted and set up in the bay. Fitting an upper control arm means removing the original, fitting the RCA350 and re-checking front geometry, with a wheel alignment to finish. We match the part to your vehicle before booking the work.

Stocked and fitted by Oak Flats Muffler Men, the Illawarra exhaust and 4x4 specialist in Oak Flats, NSW.

Common questions

Does the RCA350 fit my Toyota?
It's listed to fit the Toyota Fortuner Wagon (KUN51, TGN51). Confirm the chassis code and build with the workshop before ordering.
Do I need an alignment after fitting?
Yes - fitting an upper control arm changes front geometry, so a wheel alignment afterwards is part of the job. The workshop handles this in-house.

Fitment support across the Illawarra

Fitment checks near you across 18 Illawarra suburbs, from Oak Flats and Shellharbour to Wollongong and Kiama.
Show nearby fitment areasCollapse section

Book the right exhaust job without guessing.

Send the vehicle make, model, year, engine, current issue, desired sound or performance goal, and clear photos of the existing exhaust where available.