NM1410 Shock Absorber Nitro for Holden Colorado 7 Trailblazer RG Check
RAW 4x4RRP$212.92RAW 4x4 NM1410 Shock Absorber Nitro.
View partRCA406M1
RCA406M1 Upper Control ARM for Holden Colorado RG III UTE / Dual CAB
RCA406M1 Upper Control ARM.
BrandRAW 4x4
Category: Suspension and 4x4 parts
RRP pending
Confirmed on orderAfterpay, Zip Pay & Zip Money available
Part specs
- heights
- []
- positions
- ['Front']
- shock_types
- []
- vehicle_count
- 2
For the later Colorado, the RAW 4x4 RCA406M1 is an upper control arm listed to fit the Holden Colorado RG III dual-cab ute — the front suspension arm that locates the top of the knuckle and sets front geometry.
What an upper control arm changes
The upper control arm links the top of the front knuckle to the chassis and governs camber and castor as the suspension cycles. The RCA406M1 is RAW 4x4's upper control arm for the third-generation Holden Colorado RG. On lifted independent front ends, the factory arm can run out of adjustment, and an aftermarket arm restores correct geometry and adds clearance for the raised suspension travel.
Will the RCA406M1 suit my Colorado RG III?
It's listed to fit the Holden Colorado RG III dual-cab. Upper control arms are usually chosen as part of a lift, so tell the workshop how the front end is set up — standard or raised, and by how much — and we'll confirm the RCA406M1 is the right arm before ordering. Getting the variant right matters, as the RG generations differ.
Fitting and aligning at Oak Flats
Oak Flats Muffler Men supplies and fits RAW 4x4 control arms across the Illawarra. Because changing the upper control arm alters front geometry, a wheel alignment afterwards is part of completing the job properly, and we check the ball joint and bushes in the new arm sit and move as they should. It's listed to fit the Colorado RG III dual-cab; confirm your exact build with the workshop before booking, since RAW 4x4 doesn't publish a full spec sheet for the arm.
Stocked and fitted by Oak Flats Muffler Men, the Illawarra exhaust and 4x4 specialist in Oak Flats, NSW.
Common questions
- Is the RCA406M1 for the RG III, not the earlier RG?
- Yes — it's listed for the Holden Colorado RG III dual-cab. The RG generations differ, so confirm your exact model year and build with the workshop before ordering.
- Will fitting the RCA406M1 require an alignment?
- Yes. The upper control arm sets camber and castor, so a front wheel alignment afterwards is part of the job.
Fitment support across the Illawarra
Fitment checks near you across 18 Illawarra suburbs, from Oak Flats and Shellharbour to Wollongong and Kiama.Show nearby fitment areasCollapse section
Oak Flats Muffler Men can check this part against supplier specs, part number, image, RRP and vehicle details for customers around Oak Flats, Shellharbour, Wollongong, Dapto, Albion Park, Kiama and the northern suburbs.
Check fitment near Oak FlatsCheck fitment near Albion Park RailCheck fitment near ShellharbourCheck fitment near WollongongCheck fitment near DaptoCheck fitment near WarillaCheck fitment near CorrimalCheck fitment near WoononaCheck fitment near BulliCheck fitment near ThirroulCheck fitment near KiamaCheck fitment near Albion ParkCheck fitment near Lake IllawarraCheck fitment near Mount WarrigalCheck fitment near Barrack HeightsCheck fitment near Barrack PointCheck fitment near BlackbuttCheck fitment near Flinders
Related parts in this category
More suspension and 4x4 parts the workshop supplies and fits. Send the vehicle and the part you are weighing up for a fitted quote.
G6897BY Shock Absorber Nitro for Daihatsu Feroza / Sportrack F310 Hard
RAW 4x4RRP$159.79RAW 4x4 G6897BY Shock Absorber Nitro for Daihatsu Feroza / Sportrack F310 Hard TOP.
View part
G6302 2321 Shock Absorber Nitro for Holden Colorado RG I UTE / Dual CAB
RAW 4x4RRP pendingG6302 2321 Shock Absorber Nitro. Fast shipping, warranty included.
View part
G6302 2322 Shock Absorber Nitro for Holden Colorado RG I UTE / Dual CAB
RAW 4x4RRP pendingG6302 2322 Shock Absorber Nitro.
View part
PR302S 2321 Shock Absorber Nitro for Holden Colorado RG I UTE / Dual CAB
RAW 4x4RRP pendingPR302S 2321 Shock Absorber Nitro.
View part
PR302S 2322 Shock Absorber Nitro for Holden Colorado RG I UTE / Dual CAB
RAW 4x4RRP pendingPR302S 2322 Shock Absorber Nitro. Fast shipping, warranty included.
View partBook the right exhaust job without guessing.
Send the vehicle make, model, year, engine, current issue, desired sound or performance goal, and clear photos of the existing exhaust where available.