RCA448

RCA448 Upper Control ARM for Toyota Landcruiser 300 Series FJA300 Wagon (3.3l V6 Diesel)

RCA448 Upper Control ARM.3l V6 Diesel) (SKU: RCA448) Engineered for selected vehicle applications. Quality guaranteed.

BrandRAW 4x4

Category: Suspension and 4x4 parts

RRP pending
Confirmed on order
Afterpay, Zip Pay & Zip Money available
Afterpay acceptedZip accepted — Zip Pay and Zip Money
RCA448 Upper Control ARM for Toyota Landcruiser 300 Series FJA300 Wagon (3.3l V6 Diesel) product image

Part specs

heights
[]
positions
['Front']
shock_types
[]
vehicle_count
2

The RAW 4x4 RCA448 is an upper control arm listed to fit the 3.3L V6 diesel Toyota Landcruiser 300 Series (FJA300) wagon. It's the geometry-correcting front arm for the newest Landcruiser, aimed at lifted 300s that need their front alignment brought back into range.

What an upper control arm does on the 300

The upper control arm ties the top of the front knuckle to the chassis and governs camber and caster as the wheel moves. When a 300 Series is lifted, the factory arm can run out of adjustment, so an aftermarket upper arm restores correct geometry and clearance. The RCA448 is RAW 4x4's upper control arm for the 300 Series. The supplier hasn't published its caster correction or bush specification, so we don't quote figures and confirm suitability at quote time.

Which 300 Series does it fit?

It's listed to fit the FJA300 300 Series wagon with the 3.3L V6 diesel engine — the current-generation Landcruiser. Upper arms are fitted in pairs and most often go in alongside a lift, so the right setup depends on what the front end is running. Confirm your variant and your lift or alignment goals with the workshop before ordering.

Pricing

No recommended retail price is recorded against the RCA448 in our data. We'll quote it directly, normally as a pair since both sides are replaced together.

Fitting and alignment at Oak Flats

Oak Flats Muffler Men fits 300 Series upper control arms in-house across the Illawarra and follows up with a wheel alignment, since the arm alters front geometry. It's listed to fit the diesel 300; send your build and we'll confirm the arm and book the work.

Stocked and fitted by Oak Flats Muffler Men, the Illawarra exhaust and 4x4 specialist in Oak Flats, NSW.

Common questions

Does the RCA448 fit my 300 Series?
It's listed to fit the 3.3L V6 diesel FJA300 300 Series wagon. Confirm your variant and lift setup with the workshop.
Do I need an alignment after fitting?
Yes — upper arms change front geometry, so an alignment follows fitment. We'll arrange it at quote time.
What's the price?
RAW 4x4 hasn't published an RRP in our records. We'll quote it, usually as a pair.

Fitment support across the Illawarra

Fitment checks near you across 18 Illawarra suburbs, from Oak Flats and Shellharbour to Wollongong and Kiama.
Show nearby fitment areasCollapse section

Book the right exhaust job without guessing.

Send the vehicle make, model, year, engine, current issue, desired sound or performance goal, and clear photos of the existing exhaust where available.