RCA451

RCA451 Upper Control ARM for Toyota Hilux Wide Body Rogue Wide Body Rogue 2022 Ute/dual

RCA451 Upper Control ARM. Fast shipping, warranty included.

BrandRAW 4x4

Category: Suspension and 4x4 parts

RRP pending
Confirmed on order
Afterpay, Zip Pay & Zip Money available
Afterpay acceptedZip accepted — Zip Pay and Zip Money
RCA451 Upper Control ARM for Toyota Hilux Wide Body Rogue Wide Body Rogue 2022 Ute/dual CAB product image

Part specs

heights
[]
positions
['Front']
shock_types
[]
vehicle_count
1

The RAW 4x4 RCA451 is an aftermarket upper control arm listed for the 2022 Toyota Hilux Wide Body Rogue dual-cab ute. It's the front-end arm fitted to bring camber and caster back into range once a lift has pushed the standard geometry out.

Why swap the upper arm on a lifted Rogue?

The upper arm pins the top of the front upright and, paired with the lower arm, guides the wheel through its arc. Raise a Hilux on a lift and the factory arm can no longer hold camber and caster where they belong, and droop clearance at the ball joint tightens. An arm like the RCA451 is fitted to reclaim that geometry window and free up travel. It's a steering-and-geometry part that works with the coils and shocks, not in place of them.

Does it match the Wide Body Rogue?

It's listed for the 2022 Toyota Hilux Wide Body Rogue dual-cab ute. Upper-arm fitment hinges on the exact chassis spec and the lift the truck is running, so take the listing as the starting point and let us confirm against your build before ordering. We'll make sure the RCA451 suits your front end and the suspension you've got under it.

Compliance considerations

An upper control arm is a chassis component, with none of the catalytic-converter or muffler compliance questions that attach to exhaust work. That said, changing front geometry feeds into wheel alignment and the engineering rules covering lifted vehicles in NSW — we'll talk through what applies to your particular Rogue setup.

Fitting it in the Illawarra

Oak Flats Muffler Men fits control arms in-house across the Illawarra. The RCA451 bolts to the factory mounting points; with it in we set the front geometry and recommend a wheel alignment to finish the job. Pricing on this line is confirmed on request — it can be a special-order item — so check current cost and availability with the workshop.

Stocked and fitted by Oak Flats Muffler Men, the Illawarra exhaust and 4x4 specialist in Oak Flats, NSW.

Common questions

Will the RCA451 fit my 2022 Hilux Wide Body Rogue?
It's listed for the 2022 Toyota Hilux Wide Body Rogue dual-cab ute. Upper-arm fitment depends on chassis spec and lift height, so confirm your exact build with the workshop before ordering.
What's the point of an aftermarket upper arm?
It corrects front-end geometry after a lift — recovering camber and caster and adding clearance for the increased suspension travel.
Is a wheel alignment needed afterward?
Yes. Changing the upper arm shifts the front geometry, so we recommend an alignment once it's fitted.

Fitment support across the Illawarra

Fitment checks near you across 18 Illawarra suburbs, from Oak Flats and Shellharbour to Wollongong and Kiama.
Show nearby fitment areasCollapse section

Book the right exhaust job without guessing.

Send the vehicle make, model, year, engine, current issue, desired sound or performance goal, and clear photos of the existing exhaust where available.