TB0203 Torsion BAR for Mitsubishi Challenger / G Wagon PA II 4 Door
RAW 4x4RRP pendingTB0203 Torsion BAR.
View partRCA452
RCA452 Upper Control ARM for Mitsubishi NEW GEN Triton 2024 MV Triton 2024
RAW 4x4 RCA452 Upper Control ARM.
BrandRAW 4x4
Category: Suspension and 4x4 parts
RRP pending
Confirmed on orderAfterpay, Zip Pay & Zip Money available
Part specs
- heights
- []
- positions
- ['Front']
- shock_types
- []
- vehicle_count
- 1
An upper control arm is the geometry part, not a damping part — and the RAW 4x4 RCA452 is one listed to fit the new-generation Mitsubishi Triton (MV, 2024-on). It locates the top of the front upright and sets the camber and castor the front end runs.
Why fit an aftermarket upper control arm?
On a lifted dual-cab the front geometry shifts: raising the front of a Triton pulls the wheel out of its factory camber and castor window, which can wear tyres unevenly and dull the steering. An upper control arm like the RCA452 is the part that corrects that, restoring alignment angles and often adding clearance for the bigger travel a lift allows. It's a front-end component, sold to suit the new-generation Triton platform specifically rather than as a universal arm.
Which Triton is the RCA452 for?
RAW 4x4 lists the RCA452 for the new-generation Mitsubishi Triton — the MV series from 2024 onward. The earlier MQ and MR Tritons use different front geometry, so this arm is not a fit for them; confirm you're on the 2024-on truck before ordering. As always with feed data, treat the listing as 'listed to fit' and verify your exact variant with the workshop.
What's published, and what isn't?
The RCA452 listing names the vehicle and the 2024-on range but doesn't publish a recommended retail price — that's pending, and it's handled as a special-order item — and gives no engine restriction. We confirm the current price and the target alignment spec at the time of fitting rather than quoting figures that aren't on the sheet.
How do we fit it?
Oak Flats Muffler Men fits front control arms across the Illawarra and books a wheel alignment to follow, so the new-gen Triton leaves with its castor and camber back in range. Send us your build and we'll confirm the RCA452 suits it before scheduling the bay.
Stocked and fitted by Oak Flats Muffler Men, the Illawarra exhaust and 4x4 specialist in Oak Flats, NSW.
Common questions
- Does the RCA452 fit the old Triton?
- No — it's listed for the new-generation MV Triton from 2024 on, which uses different front geometry to the MQ/MR.
- Do I need an alignment after fitting?
- Yes. An upper control arm changes front geometry, so we book a wheel alignment as part of the job.
Fitment support across the Illawarra
Fitment checks near you across 18 Illawarra suburbs, from Oak Flats and Shellharbour to Wollongong and Kiama.Show nearby fitment areasCollapse section
Oak Flats Muffler Men can check this part against supplier specs, part number, image, RRP and vehicle details for customers around Oak Flats, Shellharbour, Wollongong, Dapto, Albion Park, Kiama and the northern suburbs.
Check fitment near Oak FlatsCheck fitment near Albion Park RailCheck fitment near ShellharbourCheck fitment near WollongongCheck fitment near DaptoCheck fitment near WarillaCheck fitment near CorrimalCheck fitment near WoononaCheck fitment near BulliCheck fitment near ThirroulCheck fitment near KiamaCheck fitment near Albion ParkCheck fitment near Lake IllawarraCheck fitment near Mount WarrigalCheck fitment near Barrack HeightsCheck fitment near Barrack PointCheck fitment near BlackbuttCheck fitment near Flinders
Related parts in this category
More suspension and 4x4 parts the workshop supplies and fits. Send the vehicle and the part you are weighing up for a fitted quote.
G6016Y Shock Absorber Nitro MAX for Mitsubishi Challenger / G Wagon PA
RAW 4x4RRP pendingRAW 4x4 G6016Y Shock Absorber Nitro MAX.
View part
RC 0344 Coil Spring for Mitsubishi Challenger / G Wagon PA II 4 Door
RAW 4x4RRP pendingRC 0344 Coil Spring. Quality guaranteed.
View part
G6346 2027 Shock Absorber Nitro for Mitsubishi Challenger PB Wagon
RAW 4x4RRP pendingG6346 2027 Shock Absorber Nitro. Quality guaranteed.
View part
G6346 2028 Shock Absorber Nitro for Mitsubishi Challenger PB Wagon
RAW 4x4RRP pendingG6346 2028 Shock Absorber Nitro.
View part
PR346S 2027 Shock Absorber Nitro for Mitsubishi Challenger PB Wagon
RAW 4x4RRP pendingRAW 4x4 PR346S 2027 Shock Absorber Nitro.
View partBook the right exhaust job without guessing.
Send the vehicle make, model, year, engine, current issue, desired sound or performance goal, and clear photos of the existing exhaust where available.