RL866

RL866 Leaf Spring for Toyota Landcruiser 75 Series Bj75, Fj75, HJ75 CAB Chassis & Troop

RL866 Leaf Spring. Quality guaranteed.

BrandRAW 4x4

Category: Suspension and 4x4 parts

RRP pending
Confirmed on order
Afterpay, Zip Pay & Zip Money available
Afterpay acceptedZip accepted — Zip Pay and Zip Money
RL866 Leaf Spring for Toyota Landcruiser 75 Series Bj75, Fj75, HJ75 CAB Chassis & Troop Carrier product image

Part specs

heights
['50mm']
positions
['Rear']
shock_types
[]
vehicle_count
3

Listed for the Toyota LandCruiser 75 Series (BJ75, FJ75, HJ75) cab-chassis and Troop Carrier, the RAW 4x4 RL866 is a rear leaf pack — the spring that holds the truck's height while also keeping the live axle located.

Why a leaf spring is a structural part

On a leaf-sprung 75 Series the pack isn't just a spring; it ties the axle to the chassis as well as carrying the load. That's why a flogged-out pack can leave the back end sitting low and feeling loose at once. The RL866 governs the rear height and how the cab-chassis or Troop Carrier sits with a tray or load aboard. The shocks handle bump control, so this part is the load-and-stance side. We confirm any rate or height behaviour at the workshop rather than stating numbers the supplier hasn't published.

Built around the weight you carry

Leaf packs are selected against the load a truck routinely runs. The RL866 covers the 75 Series (BJ75/FJ75/HJ75) cab-chassis and Troop Carrier across variants, so we'll go through how you actually use the vehicle — daily payload, towing, touring kit — before ordering, so the pack matches the work rather than just the model.

Signs your 75's pack is done

Arch flattens with age and constant weight; a Cruiser that rides harshly, squats at the rear or lets the axle shuffle is flagging a worn pack. Fitting a fresh RL866 brings the arch and designed height back. We give the shackles, bushes and U-bolts a once-over while it's apart, because bolting a new spring to tired hardware is only half the job done.

How we handle the fit

Oak Flats Muffler Men fits leaf springs in-house in the Illawarra. The work runs through the U-bolts, shackles and centre bolt on the hoist, with the hangers and bushes checked along the way. Pass us your chassis code and we'll confirm the RL866 suits and get you booked in.

Stocked and fitted by Oak Flats Muffler Men, the Illawarra exhaust and 4x4 specialist in Oak Flats, NSW.

Common questions

Does the RL866 raise the rear of my 75 Series?
A leaf pack sets rear height, but we won't quote a lift the supplier hasn't published. Tell us your load and we'll confirm what this spring does for your truck.
Are bushes and U-bolts worth doing at the same time?
Generally yes — a new pack on worn shackles, bushes or U-bolts undermines the result. We assess that hardware during fitting.
Where do you fit them?
At Oak Flats in the Illawarra. We supply and fit RAW 4x4 leaf springs and inspect the hangers and hardware as part of the job.

Fitment support across the Illawarra

Fitment checks near you across 18 Illawarra suburbs, from Oak Flats and Shellharbour to Wollongong and Kiama.
Show nearby fitment areasCollapse section

Book the right exhaust job without guessing.

Send the vehicle make, model, year, engine, current issue, desired sound or performance goal, and clear photos of the existing exhaust where available.