RL877

RL877 Leaf Spring for Foton Tunland Ute/dual CAB

RL877 Leaf Spring for Foton Foton Tunland Ute/dual CAB for selected vehicle applications.

BrandRAW 4x4

Category: Suspension and 4x4 parts

RRP pending
Confirmed on order
Afterpay, Zip Pay & Zip Money available
Afterpay acceptedZip accepted — Zip Pay and Zip Money
RL877 Leaf Spring for Foton Foton Tunland Ute/dual CAB product image

Part specs

heights
['40mm', '45mm']
positions
['Rear']
shock_types
[]
vehicle_count
4

The RAW 4x4 RL877 is a rear leaf spring listed to fit the Foton Tunland dual-cab ute — one of the less common utes RAW 4x4 catalogues a leaf pack for. On a working Tunland the rear leaf set carries the tray and sets how the back of the ute sits.

What does the rear leaf pack do on a Tunland?

The Foton Tunland dual cab rides on a leaf-sprung rear axle, the conventional ute arrangement. The RL877 is the spring that carries the load and locates that axle. When the original pack flattens the rear sits low and the ride turns harsh; this is the direct-replacement pack for it. We don't print a rate — RAW 4x4 hasn't published one in our record.

Is the RL877 the right pack for a Tunland?

It is listed for the Foton Tunland dual-cab ute. Parts coverage for the Tunland is narrower than for the mainstream utes, which is a reason to confirm rather than assume — send us your build and we'll verify the RL877 before ordering.

What's worth doing alongside the spring?

A new leaf pack deserves sound mounting hardware. We check the shackles, bushes and U-bolts when the old RL877 comes off, because a fresh spring on worn pins doesn't ride or last the way it should.

How does Oak Flats handle a Tunland fit?

Oak Flats Muffler Men supplies and fits RAW 4x4 leaf springs in-house across the Illawarra. We confirm the RL877 against your Tunland, do the hoist work, and book the bay once it's verified.

Stocked and fitted by Oak Flats Muffler Men, the Illawarra exhaust and 4x4 specialist in Oak Flats, NSW.

Common questions

Does RAW 4x4 make a leaf spring for the Foton Tunland?
Yes — the RL877 is listed for the Foton Tunland dual-cab ute. Confirm your build with the workshop before ordering.
What height will it set?
It restores the designed rear height, but no figure is published in our data, so we confirm it against your loaded ute.
Can you fit a less common ute like the Tunland?
Yes — Oak Flats Muffler Men fits RAW 4x4 leaf springs in the Illawarra and confirms fitment first.

Fitment support across the Illawarra

Fitment checks near you across 18 Illawarra suburbs, from Oak Flats and Shellharbour to Wollongong and Kiama.
Show nearby fitment areasCollapse section

Book the right exhaust job without guessing.

Send the vehicle make, model, year, engine, current issue, desired sound or performance goal, and clear photos of the existing exhaust where available.