RL878

RL878 Leaf Spring for Foton Tunland Ute/dual CAB

RL878 Leaf Spring for Foton Foton Tunland Ute/dual CAB for selected vehicle applications.

BrandRAW 4x4

Category: Suspension and 4x4 parts

RRP pending
Confirmed on order
Afterpay, Zip Pay & Zip Money available
Afterpay acceptedZip accepted — Zip Pay and Zip Money
RL878 Leaf Spring for Foton Foton Tunland Ute/dual CAB product image

Part specs

heights
['40mm', '45mm']
positions
['Rear']
shock_types
[]
vehicle_count
4

For owners chasing a fresh rear pack on the Foton Tunland, the RAW 4x4 RL878 is a replacement leaf spring listed for the Tunland dual-cab ute. It's the load-bearing spring at the back of the ute, and on a less-supported model like the Tunland a catalogued pack like this is worth knowing about.

Why does a leaf-sprung ute need a fresh pack eventually?

Leaf packs work hard and slowly lose their arch under years of tray load. On the Tunland dual cab that shows as a low rear and a hard ride. The RL878 restores the designed height and the pack's load-carrying ability. We don't quote a spring rate — RAW 4x4 hasn't published one in our data, so we confirm behaviour rather than guess.

What's the RL878 listed against?

It is listed for the Foton Tunland dual-cab ute. Because aftermarket support for the Tunland is thinner than for the big-name utes, confirming the part suits your exact build matters — send it through and we'll verify the RL878 before ordering.

How is the right pack matched to your use?

Leaf springs are chosen by the weight you carry. Before ordering the RL878 we ask how the Tunland is used — constant tray load, towing, touring — so the pack matches the job rather than just the part number.

What does fitting cover at Oak Flats?

Oak Flats Muffler Men fits RAW 4x4 leaf springs at our Illawarra workshop. It's a hoist job on the U-bolts and shackles, with the bushes and hangers checked as we go and the RL878 confirmed against your Tunland first.

Stocked and fitted by Oak Flats Muffler Men, the Illawarra exhaust and 4x4 specialist in Oak Flats, NSW.

Common questions

What does the RL878 fit?
The Foton Tunland dual-cab ute. Confirm your build with the workshop before ordering.
Will it lift the rear?
It restores designed rear height; RAW 4x4 hasn't published a lift figure in our data, so we confirm it against your load.
Do you fit these in the Illawarra?
Yes — at Oak Flats Muffler Men, with the mounting hardware inspected as part of the job.

Fitment support across the Illawarra

Fitment checks near you across 18 Illawarra suburbs, from Oak Flats and Shellharbour to Wollongong and Kiama.
Show nearby fitment areasCollapse section

Book the right exhaust job without guessing.

Send the vehicle make, model, year, engine, current issue, desired sound or performance goal, and clear photos of the existing exhaust where available.