SSMKGW0002

GWM Cannon Ute 2.0L TD 2020 - 2025 DPF Back 3in Exhaust Without Muffler

GWM Cannon Ute 2.0L TD 2020 - 2025 DPF Back 3in Exhaust Without Muffler for selected vehicle applications.

BrandMantaMPI Automotive

Category: Mufflers and resonators

RRP $1756.01 AUD
In stock at supplier
Afterpay, Zip Pay & Zip Money available
Afterpay acceptedZip accepted — Zip Pay and Zip Money
GWM Cannon Ute 2.0L TD 2020 - 2025 DPF Back 3in Exhaust Without Muffler product image

Part specs

SKU
SSMKGW0002
Supplier
MPI Automotive
Category
Mufflers and resonators
Stock status
In stock at supplier

The MPI Automotive SSMKGW0002 is a 3in DPF-back listed to fit the GWM Cannon Ute 2.0L turbo-diesel (2020–2025), run without a muffler. It starts behind the diesel particulate filter, so it opens the rear of the system without touching the DPF.

What does a DPF-back replace?

A DPF-back swaps the exhaust from the diesel particulate filter rearward and leaves the DPF and upstream hardware factory. On the GWM Cannon's 2.0L, the SSMKGW0002 steps the rear section out to 3in and runs it through to the tailpipe, opening flow where it's easiest to do so cleanly. It's the least invasive way to free up the exhaust because it doesn't disturb the emissions filter at the front of the system.

Why no muffler?

This build is supplied without a muffler, so the post-DPF section flows straight through. The DPF already does much of the acoustic work on this engine, so the result is a firmer note rather than a raw, open system — a sensible balance on a daily-driven ute that still has to behave on the highway.

Does it fit my Cannon 2.0L?

It's listed to fit the GWM Cannon Ute 2.0L turbo-diesel from 2020 to 2025. The supplier record lists the engine and years but not a separate model code, so confirm your exact variant with the workshop before ordering. RRP is $1,756.01.

Fitting at our Illawarra workshop

Oak Flats Muffler Men fits DPF-back systems on-site. Because it bolts on behind the DPF, it's a tidy job — we check the DPF flange seal, pipe routing and hanger clearance before handing the Cannon back.

Stocked and fitted by Oak Flats Muffler Men, the Illawarra exhaust and 4x4 specialist in Oak Flats, NSW.

Common questions

Does the SSMKGW0002 delete the DPF?
No — it's a DPF-back, so it replaces only the section behind the diesel particulate filter and leaves the DPF in place.
What bore is it?
It's a 3in DPF-back, listed to fit the GWM Cannon Ute 2.0L (2020–2025). Confirm your exact variant with the workshop.

Fitment support across the Illawarra

Fitment checks near you across 18 Illawarra suburbs, from Oak Flats and Shellharbour to Wollongong and Kiama.
Show nearby fitment areasCollapse section

Book the right exhaust job without guessing.

Send the vehicle make, model, year, engine, current issue, desired sound or performance goal, and clear photos of the existing exhaust where available.