Holden Commodore VE VF V8 Ute & WM/WN Caprice Dual 3in Full System 1
MPI AutomotiveRRP$6639.02MPI Automotive Holden Commodore VE VF V8 Ute & WM/WN Caprice Dual 3in Full System 1 7/8in HPC Extractors 3.5in Tips.
View partSSMKHN0070
Holden Commodore VG VP VR V6 Ute 2.5in With Extractors Muffler
Holden Commodore VG VP VR V6 Ute 2.5in With Extractors Muffler/Muffler.
BrandMantaMPI Automotive
Category: Extractors and headers
RRP $2755.48 AUD
In stock at supplierAfterpay, Zip Pay & Zip Money available
Part specs
- SKU
- SSMKHN0070
- Supplier
- MPI Automotive
- Category
- Extractors and headers
- Vehicle fitment
- Holden
- Stock status
- In stock at supplier
Built for the V6 ute, the MPI Automotive SSMKHN0070 is a 2.5in extractor system with twin mufflers, listed to fit the VG-VP-VR Commodore V6 ute. The two-muffler run keeps the note settled on a working six-cylinder ute.
What's the ute-and-twin-muffler combination for?
This SSMKHN0070 is shaped for the VG-VP-VR ute body, where the tray and rear floor route the exhaust differently to a sedan. It carries two mufflers along its 2.5in run, the more silenced of the layouts, so a six-cylinder ute that does real work keeps a calm cabin note rather than a hard bark. The 2.5in bore suits the V6's everyday low-down and mid-range pull.
What does the system replace?
It's a header-back package: tuned-length extractors at the cylinder heads, a 2.5in run and two mufflers. The factory cast manifolds and the original exhaust both come out and the SSMKHN0070 goes in as one matched set, with the primaries sized to the 2.5in pipe so the six-cylinder system flows together rather than as mismatched parts.
What's an extractor and what does it change?
Extractors replace the restrictive cast manifolds the V6 wore from the factory, giving each cylinder its own primary tube before the merge to cut back-pressure and improve scavenging. The honest trade-offs hold: they sit in the engine-bay heat zone, take labour to fit, and change the note — here kept in check by the twin-muffler silencing on the ute.
Will it suit my VG-VP-VR ute, and what's the fitting?
It's listed to fit the VG-VP-VR Commodore V6 ute; send your build and Oak Flats Muffler Men will confirm it before ordering. Fitting at our Illawarra workshop means removing the factory manifolds, hanging the extractors, then routing the 2.5in pipework through both mufflers with clearance checks around the tray and over the axle. At an RRP of $2,755.48 it's a special-order set, so we confirm fitment and lead time first.
Stocked and fitted by Oak Flats Muffler Men, the Illawarra exhaust and 4x4 specialist in Oak Flats, NSW.
Common questions
- How quiet is the twin-muffler version?
- With two mufflers along the run it's the more silenced layout for this V6 ute, keeping the cabin note settled over stock. We have no measured sound figures to quote.
- Will the SSMKHN0070 fit my VG-VP-VR ute?
- It's listed to fit the VG-VP-VR Commodore V6 ute. Confirm your exact build with the workshop before ordering, as extractor systems are tied to the specific body and driveline.
- Is it the full system or just headers?
- It's a header-back system: extractors plus a 2.5in run with two mufflers, supplied as one matched SSMKHN0070 kit.
Fitment support across the Illawarra
Fitment checks near you across 18 Illawarra suburbs, from Oak Flats and Shellharbour to Wollongong and Kiama.Show nearby fitment areasCollapse section
Oak Flats Muffler Men can check this part against supplier specs, part number, image, RRP and vehicle details for customers around Oak Flats, Shellharbour, Wollongong, Dapto, Albion Park, Kiama and the northern suburbs.
Check fitment near Oak FlatsCheck fitment near Albion Park RailCheck fitment near ShellharbourCheck fitment near WollongongCheck fitment near DaptoCheck fitment near WarillaCheck fitment near CorrimalCheck fitment near WoononaCheck fitment near BulliCheck fitment near ThirroulCheck fitment near KiamaCheck fitment near Albion ParkCheck fitment near Lake IllawarraCheck fitment near Mount WarrigalCheck fitment near Barrack HeightsCheck fitment near Barrack PointCheck fitment near BlackbuttCheck fitment near Flinders
Related parts in this category
More extractors and headers the workshop supplies and fits. Send the vehicle and the part you are weighing up for a fitted quote.
DPE Holden Commodore VE VF V8 Sedan & Wagon dual 3in full system, coated
MPI AutomotiveRRP$6639.02MPI Automotive DPE Holden Commodore VE VF V8 Sedan & Wagon dual 3in full system, coated 1 78in headers, 3.5in tips.
View part
Holden DPE VF HSV LSA V8 Sedan & Wagon dual 3in full system with 1 7/8in
MPI AutomotiveRRP$6550.21MPI Automotive Holden DPE VF HSV LSA V8 Sedan & Wagon dual 3in full system with 1 7/8in coated headers.
View part
DPE Holden Commodore VE VF V8 Sedan & Wagon dual 3in full system, coated
MPI AutomotiveRRP$6502.43DPE Holden Commodore VE VF V8 Sedan & Wagon dual 3in full system, coated 1 3/4in headers, 3.5in tips.
View part
Holden Commodore VE VF V8 Ute & WM/WN Caprice Dual 3in Full System 1
MPI AutomotiveRRP$6502.43Holden Commodore VE VF V8 Ute & WM/WN Caprice Dual 3in Full System 1 3/4in HPC Extractors 3.5in Tips.
View part
Holden DPE VF HSV 6.2L LSA Maloo ute dual 3in full system with 1 7/8in
MPI AutomotiveRRP$6443.54Holden DPE VF HSV 6.2L LSA Maloo ute dual 3in full system with 1 7/8in coated headers.
View partBook the right exhaust job without guessing.
Send the vehicle make, model, year, engine, current issue, desired sound or performance goal, and clear photos of the existing exhaust where available.