Holden Commodore VE VF V8 Ute & WM/WN Caprice Dual 3in Full System 1
MPI AutomotiveRRP$6639.02MPI Automotive Holden Commodore VE VF V8 Ute & WM/WN Caprice Dual 3in Full System 1 7/8in HPC Extractors 3.5in Tips.
View partSSMKHN0085
Holden Commodore VT VU VX VY V6 SDN Ute Wagon 2.5in With Extractors
Holden Commodore VT VU VX VY V6 SDN Ute Wagon 2.5in With Extractors (SSMKHN0085) Fits HOLDEN. Fast.
BrandMantaMPI Automotive
Category: Extractors and headers
RRP $3956.87 AUD
In stock at supplierAfterpay, Zip Pay & Zip Money available
Part specs
- SKU
- SSMKHN0085
- Supplier
- MPI Automotive
- Category
- Extractors and headers
- Vehicle fitment
- Holden
- Stock status
- In stock at supplier
Covering the long VT-VU-VX-VY run, the MPI Automotive SSMKHN0085 is a 2.5in extractor system listed to fit the V6 Commodore across sedan, ute and wagon. The 2.5in bore keeps gas speed up for everyday six-cylinder response.
What does this system fit?
The SSMKHN0085 spans four Commodore series — VT, VU, VX and VY — in V6 form, listed across the sedan, ute and wagon bodies. That breadth is its defining trait: one 2.5in extractor system catalogued for a wide slice of the late-90s-to-early-2000s six-cylinder range. Because each body routes its pipework differently, the exact build is what we confirm before anything is ordered.
Why the 2.5in bore on a V6?
A 2.5in pipe keeps exhaust-gas speed up through the mid-range rather than chasing the largest bore, which tends to favour low-down and around-town response on a six-cylinder Commodore. It's a sensible, measured size for a daily-driven VT-to-VY rather than a high-rpm build, and it pairs naturally with the tuned-length extractors at the front of the system.
What's an extractor and what does it change?
Extractors are tuned-length headers that replace the restrictive cast manifolds the V6 wore from the factory. Each cylinder gets its own primary tube before the merge, cutting back-pressure and helping the engine scavenge spent gas. The honest trade-offs: they sit in the engine-bay heat zone, take real labour to fit, and change the exhaust note. The supplier doesn't publish a specific rear-muffler configuration for this listing, so we confirm the back-end detail with you rather than assume it.
What does fitting involve at our Illawarra workshop?
Oak Flats Muffler Men supplies and fits MPI extractor systems like this across the Illawarra. The work means removing the factory manifolds, hanging the 2.5in extractors, and routing the system to suit your body with clearance checks underneath. It's listed to fit the VT-VU-VX-VY V6 in sedan, ute and wagon; at an RRP of $3,956.87 it's a special-order set, so we confirm your exact build and lead time before booking the bay.
Stocked and fitted by Oak Flats Muffler Men, the Illawarra exhaust and 4x4 specialist in Oak Flats, NSW.
Common questions
- Which Commodores does the SSMKHN0085 cover?
- It's listed for the VT, VU, VX and VY Commodore in V6 form, across sedan, ute and wagon bodies. Confirm your exact series and body with the workshop before ordering.
- What muffler setup does it use?
- The supplier doesn't publish a specific muffler configuration for this listing, so we confirm the back-end detail with you rather than guess it.
- Why 2.5in rather than a larger pipe?
- The 2.5in bore keeps gas speed up for low-down and mid-range response on a six-cylinder daily. We have no dyno data to quote.
Fitment support across the Illawarra
Fitment checks near you across 18 Illawarra suburbs, from Oak Flats and Shellharbour to Wollongong and Kiama.Show nearby fitment areasCollapse section
Oak Flats Muffler Men can check this part against supplier specs, part number, image, RRP and vehicle details for customers around Oak Flats, Shellharbour, Wollongong, Dapto, Albion Park, Kiama and the northern suburbs.
Check fitment near Oak FlatsCheck fitment near Albion Park RailCheck fitment near ShellharbourCheck fitment near WollongongCheck fitment near DaptoCheck fitment near WarillaCheck fitment near CorrimalCheck fitment near WoononaCheck fitment near BulliCheck fitment near ThirroulCheck fitment near KiamaCheck fitment near Albion ParkCheck fitment near Lake IllawarraCheck fitment near Mount WarrigalCheck fitment near Barrack HeightsCheck fitment near Barrack PointCheck fitment near BlackbuttCheck fitment near Flinders
Related parts in this category
More extractors and headers the workshop supplies and fits. Send the vehicle and the part you are weighing up for a fitted quote.
DPE Holden Commodore VE VF V8 Sedan & Wagon dual 3in full system, coated
MPI AutomotiveRRP$6639.02MPI Automotive DPE Holden Commodore VE VF V8 Sedan & Wagon dual 3in full system, coated 1 78in headers, 3.5in tips.
View part
Holden DPE VF HSV LSA V8 Sedan & Wagon dual 3in full system with 1 7/8in
MPI AutomotiveRRP$6550.21MPI Automotive Holden DPE VF HSV LSA V8 Sedan & Wagon dual 3in full system with 1 7/8in coated headers.
View part
DPE Holden Commodore VE VF V8 Sedan & Wagon dual 3in full system, coated
MPI AutomotiveRRP$6502.43DPE Holden Commodore VE VF V8 Sedan & Wagon dual 3in full system, coated 1 3/4in headers, 3.5in tips.
View part
Holden Commodore VE VF V8 Ute & WM/WN Caprice Dual 3in Full System 1
MPI AutomotiveRRP$6502.43Holden Commodore VE VF V8 Ute & WM/WN Caprice Dual 3in Full System 1 3/4in HPC Extractors 3.5in Tips.
View part
Holden DPE VF HSV 6.2L LSA Maloo ute dual 3in full system with 1 7/8in
MPI AutomotiveRRP$6443.54Holden DPE VF HSV 6.2L LSA Maloo ute dual 3in full system with 1 7/8in coated headers.
View partBook the right exhaust job without guessing.
Send the vehicle make, model, year, engine, current issue, desired sound or performance goal, and clear photos of the existing exhaust where available.