Holden Commodore VE VF V8 Ute & WM/WN Caprice Dual 3in Full System 1
MPI AutomotiveRRP$6639.02MPI Automotive Holden Commodore VE VF V8 Ute & WM/WN Caprice Dual 3in Full System 1 7/8in HPC Extractors 3.5in Tips.
View partSSMKHN0144
Holden VX VY V8 Monaro 2.5in Dual With Extractors Muffler/Tailpipe
Holden VX VY V8 Monaro 2.5in Dual With Extractors Muffler/Tailpipe (SKU: SSMKHN0144) Engineered.
BrandMantaMPI Automotive
Category: Extractors and headers
RRP $4609.94 AUD
In stock at supplierAfterpay, Zip Pay & Zip Money available
Part specs
- SKU
- SSMKHN0144
- Supplier
- MPI Automotive
- Category
- Extractors and headers
- Vehicle fitment
- Holden
- Stock status
- In stock at supplier
The MPI Automotive SSMKHN0144 is a 2.5in dual extractor-and-exhaust package listed to fit the Holden VX-VY V8 Monaro. It runs tubular extractors into a twin 2.5in system finishing through a muffler and tailpipe.
What does the SSMKHN0144 cover?
This is a dual 2.5in extractor system for the VX-VY Monaro V8. It starts at the engine with tubular extractors and carries a twin 2.5in run rearward to a muffler and tailpipe. Because the change begins at the heads, it replaces the cast manifolds rather than just swapping the rear section.
What are extractors and where do they sit?
Extractors, or headers, replace the engine's cast exhaust manifolds with separate tubes that merge further down the system. They sit right at the engine, so they are the front end of the exhaust rather than the tailpipe. On a V8 Monaro a dual layout then keeps two pipes running rearward to the muffler and tailpipe. The trade-off with header-led work is that it is a more involved fit than a bolt-on rear muffler, and the rest of the run has to be sized to match the extractors, which is why this part is supplied as a complete system from the heads back.
Will it suit my VX or VY Monaro?
It is listed to fit the Holden VX-VY V8 Monaro. The muffler-and-tailpipe rear keeps the finish tidy while the 2.5in dual run handles the flow. Monaro variants and build details differ, so confirm your exact VX or VY specification with the workshop before ordering.
What does fitting involve at our Illawarra workshop?
Oak Flats Muffler Men fits Monaro extractor systems in-house across the Illawarra. We confirm manifold access and clearances at the engine first, then the twin 2.5in run and the tailpipe exit. At an RRP of $4,609.94 this is a build-to-order item; send your VX-VY details and we'll confirm the fitment and book the bay.
Stocked and fitted by Oak Flats Muffler Men, the Illawarra exhaust and 4x4 specialist in Oak Flats, NSW.
Common questions
- Will the SSMKHN0144 fit my VX or VY Monaro?
- It's listed to fit the Holden VX-VY V8 Monaro. Confirm your exact build with the workshop before ordering.
- How does the rear finish?
- This system runs a muffler and tailpipe at the rear of the dual 2.5in setup, rather than a hotdog resonator.
Fitment support across the Illawarra
Fitment checks near you across 18 Illawarra suburbs, from Oak Flats and Shellharbour to Wollongong and Kiama.Show nearby fitment areasCollapse section
Oak Flats Muffler Men can check this part against supplier specs, part number, image, RRP and vehicle details for customers around Oak Flats, Shellharbour, Wollongong, Dapto, Albion Park, Kiama and the northern suburbs.
Check fitment near Oak FlatsCheck fitment near Albion Park RailCheck fitment near ShellharbourCheck fitment near WollongongCheck fitment near DaptoCheck fitment near WarillaCheck fitment near CorrimalCheck fitment near WoononaCheck fitment near BulliCheck fitment near ThirroulCheck fitment near KiamaCheck fitment near Albion ParkCheck fitment near Lake IllawarraCheck fitment near Mount WarrigalCheck fitment near Barrack HeightsCheck fitment near Barrack PointCheck fitment near BlackbuttCheck fitment near Flinders
Related parts in this category
More extractors and headers the workshop supplies and fits. Send the vehicle and the part you are weighing up for a fitted quote.
DPE Holden Commodore VE VF V8 Sedan & Wagon dual 3in full system, coated
MPI AutomotiveRRP$6639.02MPI Automotive DPE Holden Commodore VE VF V8 Sedan & Wagon dual 3in full system, coated 1 78in headers, 3.5in tips.
View part
Holden DPE VF HSV LSA V8 Sedan & Wagon dual 3in full system with 1 7/8in
MPI AutomotiveRRP$6550.21MPI Automotive Holden DPE VF HSV LSA V8 Sedan & Wagon dual 3in full system with 1 7/8in coated headers.
View part
DPE Holden Commodore VE VF V8 Sedan & Wagon dual 3in full system, coated
MPI AutomotiveRRP$6502.43DPE Holden Commodore VE VF V8 Sedan & Wagon dual 3in full system, coated 1 3/4in headers, 3.5in tips.
View part
Holden Commodore VE VF V8 Ute & WM/WN Caprice Dual 3in Full System 1
MPI AutomotiveRRP$6502.43Holden Commodore VE VF V8 Ute & WM/WN Caprice Dual 3in Full System 1 3/4in HPC Extractors 3.5in Tips.
View part
Holden DPE VF HSV 6.2L LSA Maloo ute dual 3in full system with 1 7/8in
MPI AutomotiveRRP$6443.54Holden DPE VF HSV 6.2L LSA Maloo ute dual 3in full system with 1 7/8in coated headers.
View partBook the right exhaust job without guessing.
Send the vehicle make, model, year, engine, current issue, desired sound or performance goal, and clear photos of the existing exhaust where available.