Holden Commodore VE VF V8 Ute & WM/WN Caprice Dual 3in Full System 1
MPI AutomotiveRRP$6639.02MPI Automotive Holden Commodore VE VF V8 Ute & WM/WN Caprice Dual 3in Full System 1 7/8in HPC Extractors 3.5in Tips.
View partSSMKHN0152
Holden VZ V8 Monaro 2.5in Dual With Extractors Muffler
Holden VZ V8 Monaro 2.5in Dual With Extractors Muffler/Muffler.
BrandMantaMPI Automotive
Category: Extractors and headers
RRP $5652.17 AUD
In stock at supplierAfterpay, Zip Pay & Zip Money available
Part specs
- SKU
- SSMKHN0152
- Supplier
- MPI Automotive
- Category
- Extractors and headers
- Vehicle fitment
- Holden
- Stock status
- In stock at supplier
Listed for the Holden VZ V8 Monaro coupe, the MPI Automotive SSMKHN0152 is a 2.5in dual extractor-and-exhaust package with a muffler each side. It's specified for the two-door Monaro body in its VZ series rather than the sedans or utes that share the engine.
Why a Monaro coupe-specific system?
The Monaro is a two-door coupe with its own floorpan and rear layout, so the dual pipework, hanger points and rear muffler placement differ from the four-door cars on the same platform. The SSMKHN0152 is listed against the VZ Monaro for that reason — same Holden V8 up front, but the section behind the diff is routed for the coupe shape.
What's in the package?
It's a complete extractor-back system, not headers alone. Tube-and-merge extractors replace the cast factory manifolds at the heads — the main breathing restriction on these V8s — then a matched 2.5in dual runs the length of the car and finishes through a rear muffler each side. The upgrade runs from the engine all the way to the tail.
What's the 2.5in dual, muffler-each-side character?
A 2.5in dual is the street-oriented sizing for this Holden V8 — paired pipes hold gas speed up for low-down and mid-range response while flowing more than the factory single-bank plumbing. With a muffler each side rather than a hotdog or open tail, the SSMKHN0152 carries a fuller, controlled note that suits a Monaro driven on the road.
How is fit confirmed at our Illawarra workshop?
Oak Flats Muffler Men supplies and fits MPI extractor systems in-house across the Illawarra. The SSMKHN0152 is listed to fit the VZ V8 Monaro; as a major-spend item we confirm your exact series and rear hanger arrangement before ordering so the dual system sits right under the coupe. Send your build and we'll book the bay.
Stocked and fitted by Oak Flats Muffler Men, the Illawarra exhaust and 4x4 specialist in Oak Flats, NSW.
Common questions
- Is this listed specifically for the Monaro coupe?
- Yes — the SSMKHN0152 is listed for the VZ V8 Monaro, whose two-door floorpan routes the rear differently from the sedans. Confirm your exact series with the workshop.
- Does it include the extractors and the exhaust?
- It's a complete extractor-back package: tube extractors at the heads plus the 2.5in dual and a muffler each side.
Fitment support across the Illawarra
Fitment checks near you across 18 Illawarra suburbs, from Oak Flats and Shellharbour to Wollongong and Kiama.Show nearby fitment areasCollapse section
Oak Flats Muffler Men can check this part against supplier specs, part number, image, RRP and vehicle details for customers around Oak Flats, Shellharbour, Wollongong, Dapto, Albion Park, Kiama and the northern suburbs.
Check fitment near Oak FlatsCheck fitment near Albion Park RailCheck fitment near ShellharbourCheck fitment near WollongongCheck fitment near DaptoCheck fitment near WarillaCheck fitment near CorrimalCheck fitment near WoononaCheck fitment near BulliCheck fitment near ThirroulCheck fitment near KiamaCheck fitment near Albion ParkCheck fitment near Lake IllawarraCheck fitment near Mount WarrigalCheck fitment near Barrack HeightsCheck fitment near Barrack PointCheck fitment near BlackbuttCheck fitment near Flinders
Related parts in this category
More extractors and headers the workshop supplies and fits. Send the vehicle and the part you are weighing up for a fitted quote.
DPE Holden Commodore VE VF V8 Sedan & Wagon dual 3in full system, coated
MPI AutomotiveRRP$6639.02MPI Automotive DPE Holden Commodore VE VF V8 Sedan & Wagon dual 3in full system, coated 1 78in headers, 3.5in tips.
View part
Holden DPE VF HSV LSA V8 Sedan & Wagon dual 3in full system with 1 7/8in
MPI AutomotiveRRP$6550.21MPI Automotive Holden DPE VF HSV LSA V8 Sedan & Wagon dual 3in full system with 1 7/8in coated headers.
View part
DPE Holden Commodore VE VF V8 Sedan & Wagon dual 3in full system, coated
MPI AutomotiveRRP$6502.43DPE Holden Commodore VE VF V8 Sedan & Wagon dual 3in full system, coated 1 3/4in headers, 3.5in tips.
View part
Holden Commodore VE VF V8 Ute & WM/WN Caprice Dual 3in Full System 1
MPI AutomotiveRRP$6502.43Holden Commodore VE VF V8 Ute & WM/WN Caprice Dual 3in Full System 1 3/4in HPC Extractors 3.5in Tips.
View part
Holden DPE VF HSV 6.2L LSA Maloo ute dual 3in full system with 1 7/8in
MPI AutomotiveRRP$6443.54Holden DPE VF HSV 6.2L LSA Maloo ute dual 3in full system with 1 7/8in coated headers.
View partBook the right exhaust job without guessing.
Send the vehicle make, model, year, engine, current issue, desired sound or performance goal, and clear photos of the existing exhaust where available.