Holden Commodore VE VF V8 Ute & WM/WN Caprice Dual 3in Full System 1
MPI AutomotiveRRP$6639.02MPI Automotive Holden Commodore VE VF V8 Ute & WM/WN Caprice Dual 3in Full System 1 7/8in HPC Extractors 3.5in Tips.
View partSSMKHN0153
Holden VZ V8 Monaro 2.5in Dual With Extractors Hotdog/Muffler
Holden VZ V8 Monaro 2.5in Dual With Extractors Hotdog/Muffler.
BrandMantaMPI Automotive
Category: Extractors and headers
RRP $5351.98 AUD
In stock at supplierAfterpay, Zip Pay & Zip Money available
Part specs
- SKU
- SSMKHN0153
- Supplier
- MPI Automotive
- Category
- Extractors and headers
- Vehicle fitment
- Holden
- Stock status
- In stock at supplier
The MPI Automotive SSMKHN0153 is a 2.5in dual extractor-and-exhaust package listed to fit the Holden VZ Monaro V8. It runs tubular extractors into a twin 2.5in system with a hotdog-and-muffler rear layout.
What does the SSMKHN0153 cover?
This is a dual 2.5in extractor system for the VZ Monaro V8. It begins at the engine with tubular extractors and splits into a twin 2.5in run, with a hotdog resonator feeding into a rear muffler on the way out. Because it replaces the cast manifolds rather than just the back half, it's an engine-back change sized to suit the V8 coupe.
What are extractors and why a dual system?
Extractors replace the factory cast manifolds with separate tubes that merge downstream, aiming to ease back-pressure at the engine end. A dual layout then carries the gas rearward through two pipes rather than one, which suits a V8 that already splits its cylinder banks. The hotdog acts as an in-line resonator ahead of the muffler to manage particular tones. The honest trade-off is that any header-led job is a more involved fit than a bolt-on rear muffler, so the whole run is supplied together to keep the sizing consistent from the heads back.
Will it suit my VZ Monaro?
It is listed to fit the Holden VZ Monaro V8 coupe. The 2.5in dual sizing with a hotdog and muffler keeps the note measured rather than raucous. Monaro builds and options vary, so confirm your exact VZ specification with the workshop before ordering.
What does fitting involve at our Illawarra workshop?
Oak Flats Muffler Men supplies and fits Monaro extractor systems in-house across the Illawarra. We check manifold access and clearances at the engine end, then the twin 2.5in run to the rear. At an RRP of $5,351.98 it's a build-to-order item; send your VZ details and we'll confirm the fitment.
Stocked and fitted by Oak Flats Muffler Men, the Illawarra exhaust and 4x4 specialist in Oak Flats, NSW.
Common questions
- Does the SSMKHN0153 fit the VZ Monaro?
- It's listed to fit the Holden VZ Monaro V8. Confirm your exact build with the workshop before ordering.
- Is this a single or dual system?
- It's a dual 2.5in system, running two pipes from the extractors back through a hotdog and muffler.
Fitment support across the Illawarra
Fitment checks near you across 18 Illawarra suburbs, from Oak Flats and Shellharbour to Wollongong and Kiama.Show nearby fitment areasCollapse section
Oak Flats Muffler Men can check this part against supplier specs, part number, image, RRP and vehicle details for customers around Oak Flats, Shellharbour, Wollongong, Dapto, Albion Park, Kiama and the northern suburbs.
Check fitment near Oak FlatsCheck fitment near Albion Park RailCheck fitment near ShellharbourCheck fitment near WollongongCheck fitment near DaptoCheck fitment near WarillaCheck fitment near CorrimalCheck fitment near WoononaCheck fitment near BulliCheck fitment near ThirroulCheck fitment near KiamaCheck fitment near Albion ParkCheck fitment near Lake IllawarraCheck fitment near Mount WarrigalCheck fitment near Barrack HeightsCheck fitment near Barrack PointCheck fitment near BlackbuttCheck fitment near Flinders
Related parts in this category
More extractors and headers the workshop supplies and fits. Send the vehicle and the part you are weighing up for a fitted quote.
DPE Holden Commodore VE VF V8 Sedan & Wagon dual 3in full system, coated
MPI AutomotiveRRP$6639.02MPI Automotive DPE Holden Commodore VE VF V8 Sedan & Wagon dual 3in full system, coated 1 78in headers, 3.5in tips.
View part
Holden DPE VF HSV LSA V8 Sedan & Wagon dual 3in full system with 1 7/8in
MPI AutomotiveRRP$6550.21MPI Automotive Holden DPE VF HSV LSA V8 Sedan & Wagon dual 3in full system with 1 7/8in coated headers.
View part
DPE Holden Commodore VE VF V8 Sedan & Wagon dual 3in full system, coated
MPI AutomotiveRRP$6502.43DPE Holden Commodore VE VF V8 Sedan & Wagon dual 3in full system, coated 1 3/4in headers, 3.5in tips.
View part
Holden Commodore VE VF V8 Ute & WM/WN Caprice Dual 3in Full System 1
MPI AutomotiveRRP$6502.43Holden Commodore VE VF V8 Ute & WM/WN Caprice Dual 3in Full System 1 3/4in HPC Extractors 3.5in Tips.
View part
Holden DPE VF HSV 6.2L LSA Maloo ute dual 3in full system with 1 7/8in
MPI AutomotiveRRP$6443.54Holden DPE VF HSV 6.2L LSA Maloo ute dual 3in full system with 1 7/8in coated headers.
View partBook the right exhaust job without guessing.
Send the vehicle make, model, year, engine, current issue, desired sound or performance goal, and clear photos of the existing exhaust where available.