Holden Commodore VE VF V8 Ute & WM/WN Caprice Dual 3in Full System 1
MPI AutomotiveRRP$6639.02MPI Automotive Holden Commodore VE VF V8 Ute & WM/WN Caprice Dual 3in Full System 1 7/8in HPC Extractors 3.5in Tips.
View partSSMKHN0168
Holden Commodore VE V8 Sedan Wagon 3in With 1 7/8 in Extractors Muffler
Holden Commodore VE V8 Sedan Wagon 3in With 1 7/8 in Extractors Muffler/Muffler.
BrandMantaMPI Automotive
Category: Extractors and headers
RRP $6019.39 AUD
In stock at supplierAfterpay, Zip Pay & Zip Money available
Part specs
- SKU
- SSMKHN0168
- Supplier
- MPI Automotive
- Category
- Extractors and headers
- Vehicle fitment
- Holden
- Stock status
- In stock at supplier
The MPI Automotive SSMKHN0168 is a 3in extractor-and-exhaust package listed to fit the Holden Commodore VE V8 in Sedan and Wagon body styles. It runs 1-7/8in primary extractors into a 3in system with a muffler-and-muffler rear arrangement.
What does this SSMKHN0168 package cover?
This is a full extractor-led job for the VE V8: tubular extractors with 1-7/8in primaries feeding a 3in pipe back to a twin-muffler configuration. Because it starts at the heads rather than partway down the system, it replaces the restrictive cast manifolds the Commodore left the factory with and re-sizes the run behind them to suit the V8.
What are extractors and what do they change?
Extractors, also called headers, replace the engine's cast exhaust manifolds with separate equal-length tubes that merge further downstream. The aim is to let each cylinder's exhaust pulse escape with less back-pressure and less interference from its neighbours. They are an engine-end change rather than a tailpipe one, so on a V8 like this they sit at the front of the system feeding the 3in pipework behind them. The trade-off is that any header change is a bigger fitting task than a bolt-on muffler and needs the rest of the system sized to match, which is why this part ships as a complete run.
Will it suit my VE Commodore?
It is listed to fit the Holden Commodore VE V8 in Sedan and Wagon. The dual-muffler layout keeps the rear note more restrained than a hotdog or muffler-delete version of the same diameter. Series codes and body styles on Australian Commodores vary, so confirm your exact VE build with the workshop before ordering.
What does fitting involve at our Illawarra workshop?
Oak Flats Muffler Men supplies and fits extractor systems like this in-house across the Illawarra. Header fitment means working at the engine end, so we check exhaust manifold access, clearances and the 3in run before booking the bay. At an RRP of $6,019.39 this is a special-order-grade build; send your VE details and we'll confirm the fitment.
Stocked and fitted by Oak Flats Muffler Men, the Illawarra exhaust and 4x4 specialist in Oak Flats, NSW.
Common questions
- Will the SSMKHN0168 fit my VE Commodore wagon?
- It's listed to fit the Holden Commodore VE V8 in both Sedan and Wagon. Confirm your exact build with the workshop before ordering.
- What size are the extractor primaries?
- This package uses 1-7/8in primary extractors feeding a 3in system. It finishes with a muffler-and-muffler rear arrangement.
- Is this a bolt-on or a workshop fit?
- Because it changes the extractors at the engine end as well as the pipework, it's a workshop fit. We confirm clearances and book it in at our Oak Flats bay.
Fitment support across the Illawarra
Fitment checks near you across 18 Illawarra suburbs, from Oak Flats and Shellharbour to Wollongong and Kiama.Show nearby fitment areasCollapse section
Oak Flats Muffler Men can check this part against supplier specs, part number, image, RRP and vehicle details for customers around Oak Flats, Shellharbour, Wollongong, Dapto, Albion Park, Kiama and the northern suburbs.
Check fitment near Oak FlatsCheck fitment near Albion Park RailCheck fitment near ShellharbourCheck fitment near WollongongCheck fitment near DaptoCheck fitment near WarillaCheck fitment near CorrimalCheck fitment near WoononaCheck fitment near BulliCheck fitment near ThirroulCheck fitment near KiamaCheck fitment near Albion ParkCheck fitment near Lake IllawarraCheck fitment near Mount WarrigalCheck fitment near Barrack HeightsCheck fitment near Barrack PointCheck fitment near BlackbuttCheck fitment near Flinders
Related parts in this category
More extractors and headers the workshop supplies and fits. Send the vehicle and the part you are weighing up for a fitted quote.
DPE Holden Commodore VE VF V8 Sedan & Wagon dual 3in full system, coated
MPI AutomotiveRRP$6639.02MPI Automotive DPE Holden Commodore VE VF V8 Sedan & Wagon dual 3in full system, coated 1 78in headers, 3.5in tips.
View part
Holden DPE VF HSV LSA V8 Sedan & Wagon dual 3in full system with 1 7/8in
MPI AutomotiveRRP$6550.21MPI Automotive Holden DPE VF HSV LSA V8 Sedan & Wagon dual 3in full system with 1 7/8in coated headers.
View part
DPE Holden Commodore VE VF V8 Sedan & Wagon dual 3in full system, coated
MPI AutomotiveRRP$6502.43DPE Holden Commodore VE VF V8 Sedan & Wagon dual 3in full system, coated 1 3/4in headers, 3.5in tips.
View part
Holden Commodore VE VF V8 Ute & WM/WN Caprice Dual 3in Full System 1
MPI AutomotiveRRP$6502.43Holden Commodore VE VF V8 Ute & WM/WN Caprice Dual 3in Full System 1 3/4in HPC Extractors 3.5in Tips.
View part
Holden DPE VF HSV 6.2L LSA Maloo ute dual 3in full system with 1 7/8in
MPI AutomotiveRRP$6443.54Holden DPE VF HSV 6.2L LSA Maloo ute dual 3in full system with 1 7/8in coated headers.
View partBook the right exhaust job without guessing.
Send the vehicle make, model, year, engine, current issue, desired sound or performance goal, and clear photos of the existing exhaust where available.