Holden Commodore VE VF V8 Ute & WM/WN Caprice Dual 3in Full System 1
MPI AutomotiveRRP$6639.02MPI Automotive Holden Commodore VE VF V8 Ute & WM/WN Caprice Dual 3in Full System 1 7/8in HPC Extractors 3.5in Tips.
View partSSMKHN0169
Holden Commodore VE V8 Sedan Wagon 3in With 1 7/8 in Extractors Hotdog/Muffler
Holden Commodore VE V8 Sedan Wagon 3in With 1 7/8 in Extractors Hotdog/Muffler (SKU: SSMKHN0169) Engineered
BrandMantaMPI Automotive
Category: Extractors and headers
RRP $5804.74 AUD
In stock at supplierAfterpay, Zip Pay & Zip Money available
Part specs
- SKU
- SSMKHN0169
- Supplier
- MPI Automotive
- Category
- Extractors and headers
- Vehicle fitment
- Holden
- Stock status
- In stock at supplier
The MPI Automotive SSMKHN0169 is a 3in extractor-back system running 1-7/8in extractor primaries into 3in pipework, listed to fit the Holden Commodore VE V8 (Sedan and Wagon). It pairs tubular extractors with a hotdog resonator and rear muffler, so it replaces the manifolds and the run behind them rather than just the tailpipe.
What are extractors and what does this system change?
Extractors, also called headers, swap the cast factory exhaust manifolds for separate tubular runners off each cylinder, then carry the gas back through 3in pipework. On the SSMKHN0169 those runners are 1-7/8in primaries, and they feed the 3in system behind them. It is a change to the exhaust side of the engine and the pipework that follows, not an internal engine part, so it works as one matched run rather than a single bolt-on. A hotdog resonator sits in the mid-section to settle resonance before the rear muffler.
How is this system put together?
This SSMKHN0169 pairs the extractors with a hotdog resonator and rear muffler at 3in. The extractor primaries are 1-7/8in, feeding the 3in run behind them. Those are the dimensions to work from when matching the rest of the system to it.
Will it suit my Holden Commodore VE V8?
The SSMKHN0169 is listed to fit the Holden Commodore VE V8 (Sedan and Wagon). A set of extractors and matched pipework is a significant fitment that has to match the specific car, so confirm your exact model, engine and driveline with the workshop before ordering. Feed data can be imperfect, so we treat the listing as a starting point and verify it against your car.
What does fitting involve at our Illawarra workshop?
Oak Flats Muffler Men fits extractor systems like the SSMKHN0169 in-house across the Illawarra. The job means good access to drop the factory manifolds, fresh gaskets on the way back, and lining the 3in pipework up cleanly through the chassis. Supplied by MPI Automotive at $5,804.74 AUD; send us your car's details and we will confirm the fit and book the bay. As an extractor-back set it is supplied to order.
Stocked and fitted by Oak Flats Muffler Men, the Illawarra exhaust and 4x4 specialist in Oak Flats, NSW.
Common questions
- What does the SSMKHN0169 fit?
- It is listed to fit the Holden Commodore VE V8 (Sedan and Wagon). Confirm your exact model, engine and driveline with the workshop before ordering.
- What size are the extractors and pipework?
- The extractors use 1-7/8in primaries feeding 3in pipework.
- Is it in stock?
- As an extractor-back system it is supplied to order through MPI Automotive. Talk to the workshop to confirm price and lead time for your car.
Fitment support across the Illawarra
Fitment checks near you across 18 Illawarra suburbs, from Oak Flats and Shellharbour to Wollongong and Kiama.Show nearby fitment areasCollapse section
Oak Flats Muffler Men can check this part against supplier specs, part number, image, RRP and vehicle details for customers around Oak Flats, Shellharbour, Wollongong, Dapto, Albion Park, Kiama and the northern suburbs.
Check fitment near Oak FlatsCheck fitment near Albion Park RailCheck fitment near ShellharbourCheck fitment near WollongongCheck fitment near DaptoCheck fitment near WarillaCheck fitment near CorrimalCheck fitment near WoononaCheck fitment near BulliCheck fitment near ThirroulCheck fitment near KiamaCheck fitment near Albion ParkCheck fitment near Lake IllawarraCheck fitment near Mount WarrigalCheck fitment near Barrack HeightsCheck fitment near Barrack PointCheck fitment near BlackbuttCheck fitment near Flinders
Related parts in this category
More extractors and headers the workshop supplies and fits. Send the vehicle and the part you are weighing up for a fitted quote.
DPE Holden Commodore VE VF V8 Sedan & Wagon dual 3in full system, coated
MPI AutomotiveRRP$6639.02MPI Automotive DPE Holden Commodore VE VF V8 Sedan & Wagon dual 3in full system, coated 1 78in headers, 3.5in tips.
View part
Holden DPE VF HSV LSA V8 Sedan & Wagon dual 3in full system with 1 7/8in
MPI AutomotiveRRP$6550.21MPI Automotive Holden DPE VF HSV LSA V8 Sedan & Wagon dual 3in full system with 1 7/8in coated headers.
View part
DPE Holden Commodore VE VF V8 Sedan & Wagon dual 3in full system, coated
MPI AutomotiveRRP$6502.43DPE Holden Commodore VE VF V8 Sedan & Wagon dual 3in full system, coated 1 3/4in headers, 3.5in tips.
View part
Holden Commodore VE VF V8 Ute & WM/WN Caprice Dual 3in Full System 1
MPI AutomotiveRRP$6502.43Holden Commodore VE VF V8 Ute & WM/WN Caprice Dual 3in Full System 1 3/4in HPC Extractors 3.5in Tips.
View part
Holden DPE VF HSV 6.2L LSA Maloo ute dual 3in full system with 1 7/8in
MPI AutomotiveRRP$6443.54Holden DPE VF HSV 6.2L LSA Maloo ute dual 3in full system with 1 7/8in coated headers.
View partBook the right exhaust job without guessing.
Send the vehicle make, model, year, engine, current issue, desired sound or performance goal, and clear photos of the existing exhaust where available.