Holden Commodore VE VF V8 Ute & WM/WN Caprice Dual 3in Full System 1
MPI AutomotiveRRP$6639.02MPI Automotive Holden Commodore VE VF V8 Ute & WM/WN Caprice Dual 3in Full System 1 7/8in HPC Extractors 3.5in Tips.
View partSSMKHN0173
HSV VE E2 Sedan Wagon 2.5in With Extractors Hotdog/Muffler
HSV VE E2 Sedan Wagon 2.5in With Extractors Hotdog/Muffler (SKU: SSMKHN0173) Engineered. Quality guaranteed.
BrandMantaMPI Automotive
Category: Extractors and headers
RRP $5428.65 AUD
In stock at supplierAfterpay, Zip Pay & Zip Money available
Part specs
- SKU
- SSMKHN0173
- Supplier
- MPI Automotive
- Category
- Extractors and headers
- Vehicle fitment
- Holden
- Stock status
- In stock at supplier
The MPI Automotive SSMKHN0173 is a 2.5in extractor system running tubular extractor primaries into 2.5in pipework, listed to fit the HSV VE E2 (Sedan and Wagon). It pairs the extractors with a hotdog resonator and rear muffler, replacing the factory exhaust manifolds and the run behind them rather than just the tailpipe.
What are extractors and what does this system change?
Extractors, also called headers, replace the cast factory exhaust manifolds with separate tubular runners off each cylinder, then carry the gas rearward through the matched pipework. On the SSMKHN0173 those runners are tubular primaries feeding 2.5in pipe behind them. It changes the exhaust side of the engine and the pipework that follows, not an internal engine part, so it is designed to work as one matched run rather than a single bolt-on.
How is this system put together?
This SSMKHN0173 matches the extractors to a hotdog resonator and rear muffler at 2.5in: 2.5in sets the bore, the primaries are tubular. Those are the dimensions to work from when matching the rest of the system. The supplier has not published the pipe material or any sound output, so we do not quote figures we cannot stand behind.
Will it suit my HSV VE E2?
The SSMKHN0173 is listed to fit the HSV VE E2 (Sedan and Wagon). A set of extractors and matched pipework is a significant fitment that has to suit the specific car, so confirm your exact model, engine and driveline with the workshop before ordering. Feed data can be imperfect, so we treat the listing as a starting point and verify it against your car.
What does fitting involve at our Illawarra workshop?
Oak Flats Muffler Men fits extractor systems like the SSMKHN0173 in-house across the Illawarra. The job means good access to drop the factory manifolds, fresh gaskets on the way back, and lining the 2.5in pipework up cleanly through the chassis. It is supplied through MPI Automotive at $5,428.65 AUD; as an extractor-back set it is supplied to order, so send your car's details and we will confirm the fit and book the bay.
Stocked and fitted by Oak Flats Muffler Men, the Illawarra exhaust and 4x4 specialist in Oak Flats, NSW.
Common questions
- What does the SSMKHN0173 fit?
- It is listed to fit the HSV VE E2 (Sedan and Wagon). Confirm your exact model, engine and driveline with the workshop before ordering.
- What size are the extractors and pipework?
- The system runs tubular primaries into 2.5in pipework, with a hotdog resonator and rear muffler.
- Can I just buy it over the counter?
- As an extractor-back set it is supplied to order through MPI Automotive. Talk to Oak Flats Muffler Men to confirm price and lead time for your car.
Fitment support across the Illawarra
Fitment checks near you across 18 Illawarra suburbs, from Oak Flats and Shellharbour to Wollongong and Kiama.Show nearby fitment areasCollapse section
Oak Flats Muffler Men can check this part against supplier specs, part number, image, RRP and vehicle details for customers around Oak Flats, Shellharbour, Wollongong, Dapto, Albion Park, Kiama and the northern suburbs.
Check fitment near Oak FlatsCheck fitment near Albion Park RailCheck fitment near ShellharbourCheck fitment near WollongongCheck fitment near DaptoCheck fitment near WarillaCheck fitment near CorrimalCheck fitment near WoononaCheck fitment near BulliCheck fitment near ThirroulCheck fitment near KiamaCheck fitment near Albion ParkCheck fitment near Lake IllawarraCheck fitment near Mount WarrigalCheck fitment near Barrack HeightsCheck fitment near Barrack PointCheck fitment near BlackbuttCheck fitment near Flinders
Related parts in this category
More extractors and headers the workshop supplies and fits. Send the vehicle and the part you are weighing up for a fitted quote.
DPE Holden Commodore VE VF V8 Sedan & Wagon dual 3in full system, coated
MPI AutomotiveRRP$6639.02MPI Automotive DPE Holden Commodore VE VF V8 Sedan & Wagon dual 3in full system, coated 1 78in headers, 3.5in tips.
View part
Holden DPE VF HSV LSA V8 Sedan & Wagon dual 3in full system with 1 7/8in
MPI AutomotiveRRP$6550.21MPI Automotive Holden DPE VF HSV LSA V8 Sedan & Wagon dual 3in full system with 1 7/8in coated headers.
View part
DPE Holden Commodore VE VF V8 Sedan & Wagon dual 3in full system, coated
MPI AutomotiveRRP$6502.43DPE Holden Commodore VE VF V8 Sedan & Wagon dual 3in full system, coated 1 3/4in headers, 3.5in tips.
View part
Holden Commodore VE VF V8 Ute & WM/WN Caprice Dual 3in Full System 1
MPI AutomotiveRRP$6502.43Holden Commodore VE VF V8 Ute & WM/WN Caprice Dual 3in Full System 1 3/4in HPC Extractors 3.5in Tips.
View part
Holden DPE VF HSV 6.2L LSA Maloo ute dual 3in full system with 1 7/8in
MPI AutomotiveRRP$6443.54Holden DPE VF HSV 6.2L LSA Maloo ute dual 3in full system with 1 7/8in coated headers.
View partBook the right exhaust job without guessing.
Send the vehicle make, model, year, engine, current issue, desired sound or performance goal, and clear photos of the existing exhaust where available.