Holden Commodore VE VF V8 Ute & WM/WN Caprice Dual 3in Full System 1
MPI AutomotiveRRP$6639.02MPI Automotive Holden Commodore VE VF V8 Ute & WM/WN Caprice Dual 3in Full System 1 7/8in HPC Extractors 3.5in Tips.
View partSSMKHN0177
HSV VE E2 Sedan Wagon 3in With 1 7/8 in Extractors Hotdog/Muffler
HSV VE E2 Sedan Wagon 3in With 1 7/8 in Extractors Hotdog/Muffler.
BrandMantaMPI Automotive
Category: Extractors and headers
RRP $6001.37 AUD
In stock at supplierAfterpay, Zip Pay & Zip Money available
Part specs
- SKU
- SSMKHN0177
- Supplier
- MPI Automotive
- Category
- Extractors and headers
- Vehicle fitment
- Holden
- Stock status
- In stock at supplier
Listed to fit the HSV VE E2 Sedan Wagon, the MPI Automotive SSMKHN0177 is a 3in extractor-and-pipe package with 1-7/8in primary extractors. It uses a hotdog resonator to take the edge off resonance.
What does this system cover?
Coverage runs from the extractors at the heads rearward, with 3in pipework feeding a hotdog resonator. The primaries are sized at 1-7/8in on this part number. It is one of 2 concrete fitments captured for this part.
What are extractors and what do they change?
Extractors (tuned headers) replace the cast factory exhaust manifolds with separate, equal-length tubes that merge further downstream. The idea is to reduce the back-pressure a shared cast manifold creates, so the spent gases from each cylinder interfere less with the next. On a V8 like this one that usually shows up as a cleaner-breathing top end and a harder-edged note; the trade-off is more underbonnet heat and a system that is a genuine workshop fit, not a bolt-in muffler swap.
Will it suit my Holden V8?
Listed fitment is the HSV VE E2 Sedan Wagon. Holden ran several series and body styles on this platform, and small differences in mounts and tailpipe routing matter. It is listed against the Sedan body. Treat it as listed to fit and confirm your exact build with the workshop before ordering.
What does fitting involve at our Illawarra workshop?
Fitting happens at our Oak Flats workshop in the Illawarra; extractor jobs want a hoist, fresh gaskets and time to dress the runners in. It carries a recommended retail price of $6,001.37 and is typically a special-order item. Tell us your exact Holden build and we will check clearances before it is ordered.
Stocked and fitted by Oak Flats Muffler Men, the Illawarra exhaust and 4x4 specialist in Oak Flats, NSW.
Common questions
- Do you fit it as well as supply it?
- Yes — we supply and fit this at the workshop, including the gaskets and clearance checks an extractor job needs.
- Are these extractors or a full exhaust?
- This part number is an extractor-back package: it includes the extractors at the heads and the 3in pipework back to a hotdog resonator.
- Is the price firm?
- The listed recommended retail is $6,001.37; it is usually special-ordered. Confirm current pricing and lead time with the workshop.
Fitment support across the Illawarra
Fitment checks near you across 18 Illawarra suburbs, from Oak Flats and Shellharbour to Wollongong and Kiama.Show nearby fitment areasCollapse section
Oak Flats Muffler Men can check this part against supplier specs, part number, image, RRP and vehicle details for customers around Oak Flats, Shellharbour, Wollongong, Dapto, Albion Park, Kiama and the northern suburbs.
Check fitment near Oak FlatsCheck fitment near Albion Park RailCheck fitment near ShellharbourCheck fitment near WollongongCheck fitment near DaptoCheck fitment near WarillaCheck fitment near CorrimalCheck fitment near WoononaCheck fitment near BulliCheck fitment near ThirroulCheck fitment near KiamaCheck fitment near Albion ParkCheck fitment near Lake IllawarraCheck fitment near Mount WarrigalCheck fitment near Barrack HeightsCheck fitment near Barrack PointCheck fitment near BlackbuttCheck fitment near Flinders
Related parts in this category
More extractors and headers the workshop supplies and fits. Send the vehicle and the part you are weighing up for a fitted quote.
DPE Holden Commodore VE VF V8 Sedan & Wagon dual 3in full system, coated
MPI AutomotiveRRP$6639.02MPI Automotive DPE Holden Commodore VE VF V8 Sedan & Wagon dual 3in full system, coated 1 78in headers, 3.5in tips.
View part
Holden DPE VF HSV LSA V8 Sedan & Wagon dual 3in full system with 1 7/8in
MPI AutomotiveRRP$6550.21MPI Automotive Holden DPE VF HSV LSA V8 Sedan & Wagon dual 3in full system with 1 7/8in coated headers.
View part
DPE Holden Commodore VE VF V8 Sedan & Wagon dual 3in full system, coated
MPI AutomotiveRRP$6502.43DPE Holden Commodore VE VF V8 Sedan & Wagon dual 3in full system, coated 1 3/4in headers, 3.5in tips.
View part
Holden Commodore VE VF V8 Ute & WM/WN Caprice Dual 3in Full System 1
MPI AutomotiveRRP$6502.43Holden Commodore VE VF V8 Ute & WM/WN Caprice Dual 3in Full System 1 3/4in HPC Extractors 3.5in Tips.
View part
Holden DPE VF HSV 6.2L LSA Maloo ute dual 3in full system with 1 7/8in
MPI AutomotiveRRP$6443.54Holden DPE VF HSV 6.2L LSA Maloo ute dual 3in full system with 1 7/8in coated headers.
View partBook the right exhaust job without guessing.
Send the vehicle make, model, year, engine, current issue, desired sound or performance goal, and clear photos of the existing exhaust where available.